WRINERY M170 Pulse Oximeter Fingertip User Manual
- June 11, 2024
- WRINERY
Table of Contents
WRINERY M170 Pulse Oximeter Fingertip
SPECIFICATION
- Brand: WRINERY
- Number of Batteries: 2 AAA batteries are required. (included)
- Battery Life: 20 Hours
- Are Batteries: Included Yes
- Product Dimensions: 2.3x 1.57 x 1.38 inches; 4.62 Ounces
- Item model number: M170
DESCRIPTION
The Oximeter Finger from WRINERY is a tool that can accurately measure your blood oxygen level and pulse rate from the tip of your finger in 8 seconds.
-
Causes of Incorrect Reading
A low blood perfusion level may make it difficult for the Spo2 pulse oximeter to accurately detect a reading. Before collecting the measures, we advise that you warm up your hands and fingers (you can do this by simply rubbing your hands together). Please make sure to keep your hand motionless after that because any movement could cause the device to reset it’s reading fake readings may also be brought on by fake fingernails and nail lacquer. -
Simple to Use
Simply place your finger inside the machine’s chamber, activate it, and then wait. Your heart rate and SpO2 levels will be accurately read in a matter of seconds. A wide range of finger sizes are accommodated thanks to the clever spring arrangement in the finger chamber. works for people 12 and older.
WHAT IS IN THE BOX
- Finger oxygen and heart rate monitor
- Lanyard
- User manual
- 2 x AAA batteries
- Protective case
- Hook
MULTI-FUNCTION
OLED SELF-ILLUMINATING SCREEN
EASY TO INSTALL BATTERY
FEATURES
-
Clear and High-Definition OLED Display
The WRINERY pulse oximeter, which has been upgraded and improved, shows you reading data on a bright and clear OLED display. -
Accurate and dependable
The fingertip pulse oximeter developed by WRINERY provides an accurate and dependable measurement method for the blood’s oxygen content. It also detects pulse rate information and O2 saturation in less than eight seconds. For reliable readings of data, it is strongly advised to utilize the gadget while it is stationary and not in motion. -
Excellent for Travel and Simple to Carry
Easy-carrying protective case with a belt loop, and neck/wrist cord. Your body may need some time to become used to new altitudes while traveling. You can use this meter to monitor your oxidation levels and make sure your body is adequately adjusting to the new environment.
NOTICE: Please take note that items with electrical plugs are made for use in the US. Because outlets and voltage vary from country to country, this product might need an adapter or converter to be used where you are traveling. Before buying, kindly verify compatibility.
FAQ’s
How long should the oximeter stay on the finger?
It works best on the middle or index finger of either hand, it should not be used on your ear. The reading takes time to steady. Keep the pulse oximeter in place for at least a minute, or longer if the reading keeps changing. Record the highest result once the reading has not changed for five seconds
What is the best finger placement for a pulse oximeter?
As per the studies, your right hand’s middle finger shows the best results. Make sure to take off any nail polish and avoid using it on cold fingers as the readings may not show correctly.
What is the work of a fingertip pulse oximeter?
The pulse oximeter uses a cold light source that shines a light through the fingertip, making the tip appear to be red. By analyzing the light from the light source that passes through the finger, the device is able to determine the percentage of oxygen in the red blood cell
Can pulse oximeter detect irregular heartbeat?
Hospital-grade pulse oximeters usually can read through perfusing cardiac arrhythmias such as atrial fibrillation and premature atrial or ventricular contractions.
What is a pulse oximeter?
pulse oximeter is a small device that measures the oxygen saturation level in your blood and your heart rate. It’s a non-invasive way to get an idea of how well your body is getting oxygen.
How do I use the WRINERY M170 Pulse Oximeter Fingertip?
To use the WRINERY M170 Pulse Oximeter Fingertip, simply insert your finger into the device, press the button, and wait a few seconds for your readings to appear on the screen.
Is the WRINERY M170 Pulse Oximeter Fingertip accurate?
The WRINERY M170 Pulse Oximeter Fingertip is designed to provide accurate readings, but it’s important to remember that it’s just one tool to help you monitor your health. If you have any concerns about your oxygen levels or heart rate, it’s always best to talk to your doctor.
Can I use the WRINERY M170 Pulse Oximeter Fingertip on children?
Yes, the WRINERY M170 Pulse Oximeter Fingertip can be used on children, but it’s important to follow the instructions carefully and supervise them during use.
Can I use the WRINERY M170 Pulse Oximeter Fingertip for sports or exercise?
Yes, the WRINERY M170 Pulse Oximeter Fingertip can be used for sports or exercise to help you monitor your oxygen levels and heart rate. However, it’s important to remember that it’s just one tool to help you track your progress, and you should always talk to your doctor before starting any new exercise program.
How do I clean the WRINERY M170 Pulse Oximeter Fingertip?
To clean the WRINERY M170 Pulse Oximeter Fingertip, wipe it down with a soft cloth and a mild disinfectant solution. Avoid using harsh chemicals or abrasive materials that could damage the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>