marta MT-4272 Electric Crepe Maker User Manual
- August 30, 2024
- MARTA
Table of Contents
marta MT-4272 Electric Crepe Maker
Parts List
- Temperature controller
- Baking panel
- Device body
- Operation indicator light
- Heating indicator light
IMPORTANT SAFETY INSTRUCTIONS
- Before first use, check the device specifications and the power supply in your network.
- Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
- For indoor use only.
- Do not operate any product with damage.
- Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
- Never attempt to dissemble and repair the item by yourself. If you encounter problems, please contact the nearest customer service center.
- Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the item.
- Always unplug the item and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
- To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not use near explosives and flammable materials.
- Do not move the appliance until it is completely cool.
- Do not touch the metal parts of the device, because they get very hot during operation.
- Do not use electric crepe maker for drying clothes, papers or other objects.
- Always check the temperature of prepared meals, especially if it is suggested to children. Allow the dish to cool down after cooking.
BEFORE THE FIRST USE
Remove all packing material from the appliance.
Before using your crepe maker for the first time, turn it on for 5 minutes.
This should be the only time the hot plate is turned on without any product on
the crepe maker’s burner.
INSTRUCTION FOR USE
- Plug in the device. Use the regulator to set the required temperature. You will notice that the heat indicator will light up, indicating that the appliance has started preheating.
- It will take about 5 minutes to reach baking temperature, after which the heat indicator will go off.
- Pour the batter onto the baking board and spread it over the surface with a T-stick.
- The heating indicator will light up again.
- Cook for approximately 6-12 minutes, turning the crepe occasionally. Adjust cooking time to your liking.
- Use a wooden spatula to remove the finished dish. To avoid damaging the non-stick coating, do not use sharp metal objects for this.
- When cooking is complete, remove the plug from the socket.
CLEANING AND MAINTENANCE
- Unplug the appliance from the power supply before cleaning.
- Let the unit cool down completely.
- Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals.
SPECIFICATION
Model| Power supply| Producer:
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China
---|---|---
MT-4272| 230 V ~ 50 Hz
WARRANTY DOES NOT COVER SUPPLIES
(filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the
identification sticker on the gift box and/or on sticker on the device. The
serial number consists of 13 characters, the 4th and 5th characters indicate
the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture,
warranty and technical characteristics of the model without notice. Please
check when purchasing device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>