marta MT-TP2004A Electric Thermo Pot User Manual
- May 15, 2024
- MARTA
Table of Contents
marta MT-TP2004A Electric Thermo Pot
Specifications
- Model: MT-TP2004A
- Power Supply: 230V ~ 50Hz
- Manufacturer: COSMOS FAR VIEW INTERNATIONAL LIMITED
- Address: ROOM 701, 16 APT, LANE 165, RAINBOW NORTH STREET,NINGBO, CHINA
Product Information
The Electric Thermo-Pot MT-TP2004A is a versatile appliance that provides hot water on demand. It features an LCD display, a handle,control panel, water outlet, cover, manual water dispense lever,glass housing, and base. The appliance automatically heats water to the desired temperature for insulation.
Usage Instructions
Operation
- Add water: Pour purified water into the glass bottle. Plug in the power and press the Power button. The digital display shows the water temperature. Press the Settings button to select the insulation temperature.
- Cleaning and Maintenance: Refer to the user manual for detailed cleaning and maintenance instructions.
FAQ
Q: How do I adjust the insulation temperature?
A: Press the Settings button to select the desired insulation
temperature.
Q: Can I use this thermo-pot for beverages other than water?
A: It is recommended to use this appliance only for heating water.
DESCRIPTION
- Handle
- Control panel
- Water outlet
- Cover
- Manual water dispense lever
- Glass housing
- Base
Real set of the appliance could be different from listed in the User manual. Check once buy.
TECHNICAL SAFETY
When using electrical appliances, basic safety precautions should always be observed including the following:
- Before connecting the appliance, check if the voltage indicated corresponds with the mains voltage in your home.
- To protect against electrical shock do not immerse body, cord or plug in water or other liquid.
- Place the airpot on a flat surface, at least 30 cm away from stove or other heat source.
- Do not fill any liquid except clean water.
- Do not fill water directly from a tap water faucet. Use a pitcher or kettle to keep electrical parts safe from splashes of water.
- Never plug into the power source without filling the pot with water. Do not over fill the pot with water and always check if the water level needs new supply.
- Avoid splashes of water on the airpot’s body especially on the top portion to prevent electrical shocks. In accidental case of water splashes, wipe it dry immediately.
- Do not let cord hang over edge of table or counters, or touch hot surfaces.
- Do not operate any appliance with damaged cord or plug or after the appliance malfunction of has been damaged in any manner.
- In case of damaged mains cord, it must be replaced by a repair shop authorized by the manufacturer.
- Keep the airpot away from children, handicapped and elderly persons. They should be supervised if they are going to dispense water from the airpot to prevent accidents and burn injuries.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting or taking off parts.
OPERATION
- Add water. Pour an appropriate amount of water into the glass bottle (purified water is recommended), plug in the power and click “Power” button , the digital tube on the right displays the current water temperature. At this time, press the “Settings” button to select the required insulation temperature. The product will automatically heat to 100 degrees and then enter the default working state of the selected insulation temperature. When the product is working, press the “Power” button to return the product to standby mode.
- Water dispensing. Automatic water dispensing: Press and hold the “Child safety lock” button for 2 seconds to cancel the lock (the child lock button light is off), then click the “Water dispense” button to select the water dispensing time (10-15-20 seconds). The water discharging time is displayed on the left digital tube. Select it. Then the water will be discharged automatically. During the water discharge process, press the “Water Discharge” button again to stop the water discharge. Manual water dispensing: Press and hold the “child lock” button for 2 seconds to cancel the lock (the child lock button light goes out), press the “manual water dispensing lever” to release water, and release the “manual water discharging lever” to stop water dispensing; manual water discharging is not limited by the water dispensing time.
- Boil again. Click the “Reboil” button , and the water in the heat preservation state will boil again. At this time, the left digital tube displays 100 degrees, and the water will enter the standby state after boiling.
- Child lock. After the device is turned on and you click the “Power” button for 5 seconds, the “Child Lock” button will automatically activate; the “Child Lock” button will only lock the “Water Dispense” button and will not lock during the process of dispensing water. The locking function will automatically start 5 seconds after the dispensing of water stops.
CLEANING AND MAINTENANCE
When cleaning the airpot, make sure to unplug from the power source and the hot water has cooled down completely before taking it out from the airpot. It is advisable to clean the airpot inside and outside before using for the first time. Cleaning the airpot scheduled once a month or as desired to ensure water quality and to lengthen service life of inner pot. When the airpot is not going to be used for a long time, it should be cleaned and dried before sealing in a plastic bag and stored in a safe, dry place.
TECHNICAL SPECIFICATION
WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK
COATING, RUBBER SEALS, ETC.)
Production date is available in the serial number located on the
identification sticker on the gift box and/or on sticker on the device. The
serial number consists of 13 characters, the 4th and 5th characters indicate
the month, the 6th and 7th indicate the year of device production. Producer
may change the complete set, appearance, country of manufacture, warranty and
technical characteristics of the model without notice. Please check when
purchasing device.
MANUFACTURER: COSMOS FAR VIEW INTERNATIONAL LIMITED – ROOM 701, 16 APT, LANE 165, RAINBOW NORTH STREET, NINGBO, CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>