TESLONG WF200 Digital Borescope User Manual
- June 9, 2024
- TESLONG
Table of Contents
TESLONG WF200 Digital Borescope User Manual
Safety
WARNING! Please read all safety warnings and all instructions before using this product. Fallure to follow the warnings and Instructions may result in electric shock, fire and serious injury.
- Keep the tool dry, clean, free from oil, water, gas or other materials causing corrosion.
- Keep work area clean and well lit.
- This appliance is not intended for use by persons with limited physical, sensory or mental capabilities.
- This appliance is not intended for medical use or personal inspection.
- Keep bystanders, children away while operating the tool.
- Do not overreach, keep proper footing and balance at all times.
Battery
- Charge the device when the power button red blinks, the light turns to red/purple stay on when charging and will be off when fully charged.
- Only use 5V indoor home use USB charger to charge the device.
- Please charge the device at least once every 3 months if it is left unused for a long time to prevent damage to the battery.
Maintenance
- Always keep the camera lens clean.
- Should any other components not mentioned need to be replaced, please contact our service agents
General Guide
Blue LED stay on: Running status
Red LED flash: Low Battery
Red LED stay on: Power off Charging status
Purple LED stay on: Power on Charging status
Operating Instruction
DOWNLOADING THE APP
Use the endoscope with the “Smart Endoscope“ app. You can download it from Apple Store/Google Play or scan the QR codes below.
CONNECTING YOUR DEVICE TO THE ENDOSCOPE
-
Connect the cable to the endoscope.
-
Turn on the endoscope and the power indicator will stay blue.
-
Go into the WiFi setting on your devices, search and choose “WIFI Cam_**“to connect.
-
Open the “Smart Endoscope” app, click the button to add “Wi-Fi Endoscope” and start using it.
App Instruction
- Setting : Click to choose Front Camera/Side Camera/Dual View (Dual Lens Only)
- Rotate : Click to rotate the image
- Screen Mirroring : Click to enter into Screen Mirroring Mode
- Gallery : Click to check the photos/videos
- Shoot Button : Click to take a photo/video record
- Photo : Click to enter into Photo Mode
- Video : Click to enter into Video Mode
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
support@teslong.com
www.teslong.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>