Shenzhen Future Charger Technology HB02 Fast Wireless Charger User Manual
- June 6, 2024
- Shenzhen Future Charger Technology
Table of Contents
User Manual
Brush Pot Wireless Charger Stand
Please read the instructions before using the product
Parameter specification
Model: HBO2
Input voltage/current: 5V/2.0A, 9V/2.0A
Output power: 5W/7.5W/10W
Product standard: Qi Standard
Transmission Distance:7mm
Efficiency ?≥75%
Product size: L283W92.5H112.Sam
Installation
- Plug the power adapter into the
- USB cable Aside connects the power
- Blue Light is a wireless charging indicator light.
- Put the mobile phone which supports the wireless charging function on the launch plate correctly. Indicator light changes to green from blue if it starts to The light will be blue if you remove the mobile phone, which means the wireless charging pad enters in a standby mode.
Note: Only the QC2.0/QC3.0 Standard power adapter can support this product’s fast charging. Adapters are not included, they should be bought separately if in need.
Indicating status and protection function
- LED blue light: Standby
- LED green light: Charging
- Blue light flashing: Mobile phone location in deviation or over-temperature protection or trigger FOD
Important notes
- Please remove the protective case (except receiver case) when charging, to keep high efficiency. We suggest you use a 2A adapter for the best results.
- Do not disassemble the charger or throw it into fire and water, to avoid causing a short circuit leakage.
- Do not use the wireless chargers in severely hot, humid, or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.
- Do not place stuff with magnetic stripe or chip (ID card, bank cards, etc ) on a wireless charging pad to avoid magnetic failure.
- Please keep the distance at least 20cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
- Please take care of the children and ensure they won’t play with the wireless charger as a toy, to avoid unnecessary accidents.
Warranty
There is one year guarantee for this product unless anthropogenic factor.
Packing List
Brush Pot Wireless Charger Stand Type-C Cable
User Manual
- The involved images are sketch maps, the final product as per the material subjects.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm the radiator of your body: Use only the supplied antenna.