BlackboxMyCar D1026 S 10 Inch Carplay Display User Manual

BlackboxMyCar D1026 S 10 Inch Carplay Display

Respected user

First of all, thank you very much for using our company’s services of products. It is cur greatest honor to be able to serve you. Your recognition and support are our driving force! Please read this manual carefully before using the diving recorder. The manual uses pictures and texts, with illustrations in the text to explain the operation of the product in detail and intuitively.

In addition, due to the different production dates and batches of the products, the description may be different from the actual products used, please refer to the actual product.

Connection Diagram

Note:

1. Android Auto supports wired and wireless connections, Carplay only supports wireless connections;
2. After the FM transmitter function is turned on and the AUX cable is inserted, the device will have no sound. After the FM function is turned off or the AUX cable is removed, the device will have sound;
3. Bluetooth is a function of connecting with a mobile phone, and it does not support audio transmission to car speakers via Bluetooth.

The 7-inch product supports wireless Carplay, wired + wireless Android

Auto, Apple Airplay, Android mirror. and Music functions. In the icon, click “Mobile Link”, select the mode (Apple Carplay / Android Auto I Apple Airplay/Android Mirror / Music/ Wifi info), and then the device will switch to the corresponding mode.

Wireless Carplay/wireless Android Auto Connection tutorial

1. iPhone version, please follow the below steps:

   • First, click the “Carplay” on Setting to switch to the Carplay mode,
   • For the first-time connection, please open the iPhone’s Bluetooth &WiFi.
   • Connect the DVR’s Bluetooth, and wait for 5-10 seconds. Mobile phones will pop up one window and choose to use a CarPlay vehicle.
   • After the Bluetooth authentication is successfully, and disconnected automatically, the DVR’s CarPlay interface will be transmitted automatically.
   • Next time the device will be automatically re-connecting (No need for any cooperation if the driver’s Bluetooth & wifi are opened)
     Note:
     Due to the version problem of the iOS system, please do not select to connect the device’s WiFi to the mobile phone. If the connection fails, please manually ignore the connected device’s tfxxx-wifi and click Bluetooth connection again.

2. Android phone version, please follow the below steps:
   Choose
   First, please confirm that your phone is Android 10 or higher version. Android phones need to install the Android Auto App in advance (you can download it on Google Store)

3. First, click the “Android Auto” on Setting to switch to the Android Auto mode,

4. Check whether the Bluetooth and WIFI of the DVR are open,

5. Open the Bluetooth and WiFi of the mobile phone,

6. Connect to the paired DVR and Bluetooth of the mobile phone

7. After the Bluetooth connection is successful, wait for 10-15 seconds to automatically enter the Android Auto page.

In addition, because there are too many Android mobile phones, some mobile phones may be incompatible. If your phone cannot successfully connect to Android Auto, please ask the merchant for help first.

Mirror Link Connection tutorial

(iPhone)
Choose

Connection matters:

1. The mobile phone is connected to the device’s WiFi
2. Open the Apple pull-up menu to find Screen Mirroring
3. Click to connect to zj-airplay
   • Button Description: Volume -, Volume+, back to the main interface
   • Common problem: The copyright of some video content is restricted and screencasting is not supported.

(Android Phone)
Choose

Connection matters:

1. Scan the QR code to download the app and turn on the mobile hotspot(recommended to set the 5Gfrequency band}.
2. For the first connection, click the WiFi icon to input the hotspot information. Only numbers, English and some special character combinations are supported.
3. Connect to BT, and click to start screen casting.

Button Description:

• Volume, Volume+, back to the main interface Common problem:
• The copyright of some video content is restricted and screencasting is not supported.

Choose

Connection matters:
Click on the gear icon in the lower right corner to search for Bluetooth, and then you can play the music in your mobile phone once you are connected.

Some FAQs

1. How do I disconnect the CarPlay / Android Auto?
   Please turn on the WiFi on your Apple phone.

2. How to connect again the device if manually disconnecting CarPlay / Android Auto?
   Please click the phone’s Bluetooth to connect again the device.

3. How to connect CarPlay / Android auto when powering off and restarting the DVR device?
   If the mobile phone is connected to the DVR device before, then it will reconnect if the phone’s Bluetooth and WiFi is ON status.

4. How to use the wireless app Roadcam when connecting to CarPlay?
   When Carplay is connected, you can also enter the Roadcam app for wireless control at the same time.

5. How to control the sound volume when you connect Carplay I Android Auto?
   There is sound volume + / – on the DVR device, you could adjust the volume.

6. How to connect the vehicle’s original audio?
   After connecting Carplay / Android auto, you could turn on the DVR’s FM transmission function, and then turn on the car’s FM Radio to adjust and set up the same FM frequency as the DVR’s FM, you could transmit the music to the original car audio for listening.

7. How do China mainland’s Android phones connect to wireless Android auto?
   China mainland’s Android phones don’t support wireless interconnection temporarily, but could use Bluetooth to connect l this device.

Interface description

7.0inch display:

Remarks:
When inserting the micro SD card, the device will automatically enter the recording mode. To ensure recording normally, please select a card whose speed can at least reach class U1, thanks.

Driving recorder

Click will enter the preview screen of the dash cam:

Replay

Click will enter the local video playback:

1. Select the video file to play from the right menu and then enter video playback.
2. During playback, click the lock/ delete icon to lock/ delete the playback video file.

Voice control Optional

Support voice control, and voice command list:
Open the screen, Close screen, Display previous record Post display record, Emergency video, I want to take pictures, Turn on recording, turn off recording.

Bluetooth

Click will enter the Bluetooth Connection interface:

1. Click the gear icon to modify the Bluetooth name
2. Bluetooth on/off, blue is on:
3. Click disconnect to disconnect the current connection.

FM emission + AUX Connection

Click will enter the Bluetooth Connection interface:

1. Click FM on/off, and blue is on,
2. After opening, click +/- to select the frequency band.
3. There are 3 modes of audio output: SPK (speaker of the device itself)/FM transmitter/AUX. The device will have sound only when SPK mode is selected. If FM/AUX is selected, there will be no sound from the device.

AUX Connection
Open the FM transmission function, select AUDIO OUT: AUX, and then connect the AUX cable. The sound will be transmitted to the car audio.

System settings

Click will enter the system setting interface:

WiFi wireless app elook pro control
Click will enter the system setting interface:

• Wifi Name: TF790-XXX
• Wifi Password: 12345678

How to make time not to reset after restarting?
Open the time and date settings, first set the correct time zone (you can search your local time zone on Google), then adjust the correct time , and finally click “Confirm” .

How to change the image effect of the rear camera?
After inserting the rear camera, the “Back Camera Mirror” option will appear in the settings. Turn it on or off, and then you can adjust the image effect.

Product Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>