marta MT-HP4222A Electric Induction Cooktop User Manual
- May 15, 2024
- MARTA
Table of Contents
marta MT-HP4222A Electric Induction Cooktop
Specifications
- Model: MT-HP4222A
- Power Supply: 220-240V ~ 50/60Hz
- Power Consumption: 13A
- Dimensions: 4-5-6-7-
- Manufacturer: Cosmos Far View International Limited
Important Safety Instructions
Ensure proper supervision and instruction on appliance use by a responsible
person for safety.
Cleaning and Maintenance
Regularly clean and maintain the appliance according to the user manual
guidelines.
Using the Device
- Standby Mode: Upon connecting the device, it enters standby mode with a signal sound and display showing
- Select Cooking Function:
- Place a suitable pot on the cooking zone.
- Press the Switch button and the display will show ON.
- Press Search, and the cooker will start cooking.
- Heating: Rotate the knob clockwise to adjust heat levels from 1-20.
- Set Up Timer:
- Press the Switch button.
- Press the Search button, select power level, then press the Clock button. The display shows 0.
- Rotate the knob to set the cooking time in one-minute increments.
- The display will show the desired setting. You can select a cooking time from 1-99 minutes.
- Pan Recognition: The device features pot recognition with warnings when cookware is removed. The message E0 appears on the display, and the device switches to standby mode after 60 seconds for safety.
Frequently Asked Questions (FAQ)
- Q: How do I know if the device is in standby mode?
- A: The device emits a signal and displays —- when in standby mode.
- Q: What should I do if the pot recognition warning E0 appears?
A: Ensure that after use, the hot plate is switched off using the ON/OFF button to prevent burns due to high temperatures at the cooking zone.
USER MANUAL
Parts list
- Body
- Plate
- Rotate switch
- Control panel switch
Real
set of the appliance could be different from listed in the User manual. Check
once buy.
IMPORTANT SAFETY INSTRUCTIONS
Read this manual carefully before using the appliance and save it for future reference.
- Before first use, check the device specifications and the power supply in your network.
- Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
- For indoor use only.
- Do not operate any product with damage.
- Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
- Never attempt to dissemble and repair the item by yourself. If you encounter problems, please contact the nearest customer service center.
- Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the item.
- Always unplug the item and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
- To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not use near explosives and flammable materials.
- Do not move the appliance until it is completely cool.
- Do not touch the metal parts of the device, because they get very hot during operation.
- Do not use hot plate for drying clothes, papers or other objects. Only use it for cooking.
- Always check the temperature of prepared meals, especially if it is suggested to children. Allow the dish to cool down after cooking.
CLEANING AND MAINTENANCE
- Unplug the appliance from the power supply before cleaning.
- Let the unit cool down completely.
- Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals.
USE THE DEVICE
Standby mode
After you have connected the device’s plug to the main supply, the device is
in standby mode. A signal will sound. The display will show “——”. Select
cooking Function
- Put a suitable pot on the cooking zone.
- Press“Switch” button and display shows”ON”.
- Then press”Search”, and the cooker will begin cooking.
- Heating: Rotate the knob clockwise to increase from 1-20 levels.
Rotate the knob counterclockwise to decrease from 1-20 levels.
There are 20 levels of temperature are selectable: 1 – 30℃, 2 – 40℃, 3 – 50℃,
4 – 60℃, 5 – 70℃, 6 – 80℃, 7 – 90℃, 8 – 100℃, 9 – 120℃, 10 – 140℃, 11 – 160℃,
12 – 180℃, 13 – 190℃, 14 – 200℃, 15 – 210℃, 16 – 220℃, 17 – 230℃, 18 – 240℃,
19 – 260℃, 20 – 270℃.
Set up timer
- Press“Switch” button
- Press “Search” button, then choose power level, then press “Clock” button. The display shows”0″.
- Briefly rotate the knob to set the time in increments of one minute and decrements of one minute.
The display will show the desired setting.
NOTE: This timer means the device will keep cooking for the time you input. After the set time has elapsed, the device will come back to standby mode. You can select from 1-99 minutes.
PAN RECOGNITION
The device has a pot recognition function. It gives several warnings to indicate that the cookware has been removed. The message“E0″ appears on the display. For safety reasons, the appliance will switch to standby mode after about 60 seconds. The fan may continue running. In this context, please pay attention to the following:
WARNING: After use, the hot plate is to be switched off by means of its
regulation and control devices (ON/OFF button ) and not just by pan
recognition.
WARNING: Hazard of burns!
Because of the heat radiated during cooking, dangerously high temperatures may occur at the cooking zone after the cooking cycle.
ERROR MESSAGES
During operation the following error messages can be displayed:
Errors| Check whether plug is swtiched on. Check whether the electricity is
cut off.
---|---
BI Sound| Check whether the pot used is suitable or not.
| |
- Check whether the pot is on the cooking zone centre.
- Check whether the pot bottom diameter bigger than 12cm.
|
---|---|---|---
| Warning Signal E0|
- Check whether the suitable pot is used.
- Check whether the pot is put on the cooking plate
| Warning Signal E1| Furnace surface sensor open short circuit
| Warning Signal E2| IGBT sensor open short circuit or Radiator
overtemperature
| Warning Signal E3| Electricity voltage too high （>260V）
| Warning Signal E4| Electricity voltage too low （<140V）
| Warning Signal EC| Communication failure
SPECIFICATION
Power supply
- Producer: COSMOS FAR VIEW INTERNATIONAL LIMITED-ROOM 701, 16 APT, LANE
- 220-240 V ~ 165, RAINBOW NORTH STREET, NINGBO, CHINA
- 50/60Hz Made in China
WARRANTY
DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber
seals, etc.) Production date is available in the serial number located on the
identification sticker on the gift box and/or on sticker on the device. The
serial number consists of 13 characters, the 4th and 5th characters indicate
the month, the 6th and 7th indicate the year of device production. Producer
may change the complete set, appearance, country of manufacture, warranty and
technical characteristics of the model without notice. Please check when
purchasing device.
Current information about service centers is available on the website
http://multimarta.com/