marta MT-2232 Lint Remover User Manual

October 30, 2023
MARTA

marta logo MT-2232 Lint Remover
User Manual

MT-2232 Lint Remover

marta MT 2232 Lint Remover 

Parts list

  1. Removable lint container
  2. Protective metal grid
  3. Housing
  4. On / Off switch
  5. Appliance plug
  6. Adapter
  7. Brush for blades cleaning

IMPORTANT SAFETY INSTRUCTIONS

Read the following instructions carefully before operating the appliance and save it for reference in the future.

  • It is not intended for industrial use.
  • For indoor use only. Use only for domestic purposes according to the instruction manual.
  • Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
  • Do not use the item to clean delicate clothing.
  • Take out batteries if you do not use it for a long period of time.
  • Do not use the unit as a shaver for body and face.
  • Do not use on the clothes while wearing.
  • Do not use it for plush clothes, for clothes with nip, embroidery etc.
  • Do not use the appliance if you have any physical or mental disability and have no any operational experience with similar technics. In such cases the user must have the operating instructions from the person which in charge of security arrangement of the user.

INSTRUCTION FOR USE

  • Open the battery compartment cover.

  • Insert two batteries AA (not included), respecting the polarity.

  • Close the battery compartment cover.

  • Place the clothes on a flat surface, preferably an ironing board, smooth the clothes out.

  • Remove the protective cover from the unit.

  • Set the ON/OFF switch to “ON” position and begin to clean lint or fuzz off the clothes by fluent circular movements without pressure.
    Note: Do not press hard on the unit since the clothes or the lint remover head can be damaged.

  • Set the ON/OFF switch to “OFF” position to switch off the appliance.

  • Take the lint container out and remove the lint out of it.

CLEAN AND CARE

  • Remove the battery.
  • Carefully use a flat edge screwdriver or coin and push the blade net from side to open.
  • Take out the blade and clean lint and fibers with the brush.
  • Replace the blade on the axis of motor and carefully rotate it slightly and firmly.
  • Put the blade net on the body and push it into position.
  • Wipe over the body, using a soft damp cloth.
  • Do not clean this unit with abrasive or any chemical solutions.
  • Wipe the unit dry.
    Note: For storage switch off the unit, remove battery and replace the protective cover.

SPECIFICATION

Power supply Net weight  / Gross weight Package size (L х W х H)
230V 50Hz 0,160 kg / 0,205 kg 114 mm x 70 mm x 185 mm

WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production.
The manufacturer reserves the right to change the design and technical data of the appliance without notice.
Producer:
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China. Made in China

marta logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals