2E S616-400 Black with Compatibility Check User Guide

: August 30, 2024
: 2E

Table of Contents

S616-400 Black with Compatibility Check
Specifications:
Product Usage Instructions:
Installation Guide:
Cooling System Setup:
Maintenance and Cleaning:
- FAQ:
Q: Can I install a full-size ATX motherboard in this case?
Q: How many USB ports are available on the front panel?
Q: What is the maximum power supply wattage supported?

S616-400 Black with Compatibility Check

“`html

Specifications:

Model: 2E PC CASE (S616-400)
Supported Motherboard: Micro ATX/ITX
Drive Bays: 1x 5.25”, 3x 3.5”, 2x 2.5”
Front I/O: 1x 80mm fan, 2x USB 3.0, 1x TYPE-C, HD Audio+MIC,
Power, Reset
Power Supply: 400W

Product Usage Instructions:

Installation Guide:

Open the computer case by removing the side panels.
Install the motherboard, ensuring it is properly aligned with
the standoffs.
Install the drives into the designated drive bays.
Connect the front I/O panel connectors to the motherboard
headers.
Install the power supply unit in the dedicated PSU mounting
area.

Cooling System Setup:

To ensure proper cooling, follow these steps:

Install additional fans if needed for improved airflow.
Ensure proper cable management to avoid obstructing
airflow.
Clean dust filters regularly to maintain optimal cooling
performance.

Maintenance and Cleaning:

Regular maintenance is essential for optimal performance:

Turn off and unplug the computer before cleaning.
Use compressed air to remove dust from components and
fans.
Clean the exterior of the case with a microfiber cloth and mild
cleaning solution.

FAQ:

Q: Can I install a full-size ATX motherboard in this case?

A: No, this case only supports Micro ATX and ITX
motherboards.

Q: How many USB ports are available on the front panel?

A: The front panel includes 2x USB 3.0 ports and 1x TYPE-C
port.

Q: What is the maximum power supply wattage supported?

A: The case supports a maximum power supply of 400W.

“`

‘

COMPUTER CASE OPERATION GUIDE UA RU EN
2E PC CASE (S616-400)

UA

: ‘ . : ‘. : 2-S616-400

/ 5.25” 3.5” 2.5” ,
,
, VGA, CPU , (), (), , ,

Desktop/ , SGCC 0.5 Micro ATX/ITX 1 . 2 . 2 . 4 . : 1x 80 2xUSB 3.0,1xTYPE-C, HD Audio+MIC, Power, Reset 400 W 78 / 40099314 449155349 3,3 3,8 12

2

UA

1 (d) 1 (b) 2 (a)

1 ()

2 (c)

()

2 (b)

3 (a)
3.5”HDD*1
5.25

HDD 3.5
3 (c)

1 (c)

4 (a)
3.5”SSD*1

SSD 2.5

4 (c) 5.25

3(b)

4 (b)

2.5”SSD*2

1. 1 () ; 1 (b) ; 1 (c) 5,25”; 1 (d) 80 .

2. 2 () ;
2(b) ; 2 (c) .

3. . : 5,25”,3,5”, 2,5”.

3 () HDD 3,5”

;

3 (b) SSD2,5”; ; 3 (c) 5,25”; HDD 3,5”.

4. 80.:5,25.”,;35,,255”;,;2,5”.

1 1

4 () 1()HDD3,55,’2’;5;

1

4 (b) 801(b). SSD 2,5” :

1

1(c);

4 (c) 1(d) 5,25” HDD 3,5”.

3

()

UA

()

POWER. . .
.

USB 3.0 x 2
TYPE C x 1

HD-Audio

/

1

DD

. 11

2

HDD

8

3

1

4

/

/ 5

1

/

/ 6

1

7

1

, .

4

UA

80+ PFC /
, , ()

400W SFX

0.5 SECC

Micro SFX

1x 80

1.2 ( VDE)

1×24 pin

1×4 pin (12V)

SATA x 2

4 pin MOLEX x 2

AC 230V/50Hz

+3.3V +5V +12V1 +12V1 -12V +5Vsb

14A 20A 11A 13A 0.5A 2.5A

124

275

19

400

5

UA
,
, 5,25″ .

,

1

‘

, –

2

5,25″,.

, . .

, 5,25” .

3 ‘ 5,25” .

‘ 5,25″ .
.
4 –
‘ . , . .

HDD. .

5 5,25” HDD.

6

‘HDD.

5,25″

.7

.

8 .

9 5,25” , . VGA.

10 .

6 5,25″ HDD.

5,25″5,25″,, UA..VGA.VGA. .

1 ‘ .

2 .

3 .

4 .

, . : : , . 1. ‘
, . 2. ‘ , ,
. 3. ,
. 4. . : : 1. , . 2. ,
, . 3. ‘ 24- . 24- –
4- , , –

7

UA
24-, 20- . . 24- , 24- . b. 20- , ‘ 4- 24- 20- , 4- . 4. 8 ( 4)- + 12V. a. 8-

12V, 8- . b. 4- , ‘ 4- 8- 4- . 5. ‘ , PCI-Express SATA. a. CD-ROM / DVD-ROM. b. SATA SATA. c. PCI-Express PCI-Express. d. – 4- . e. , . 6. , ON ( «I»).

: +10 ° ~ +40 ° C. : -40 ° ~ +70 ° C. ( ) : 20% ~ 85% . ( ) : 5% ~ 95% .

· – ‘. .
· 1, . , , .
· 230 / 50 . +10 ° , +40 ° C. . , .
8

UA
· 3.5 . · ,
. . · ,
. , . , . , . · . . , .
!
1. . . , , .
2. .

. 2) , , . 3) ,
. 4) ,
. 5) ,
. 6) .
,
, .
, .
, .
.
9

RU

: . : . : 2-S616-400.

/ 5.25” 3.5” 2.5” ,
,
, VGA, CPU , (xx), (xx), , ,

Desktop/ , SGCC 0.5 Micro ATX/ITX 1 . 2 . 2 . 4 . : 1x 80 2xUSB 3.0,1xTYPE-C, HD Audio+MIC, Power, Reset 400 W 78 / 40099314 449155349 3,3 3,8 12

10

RU

() 1 (d)
1 (b)
2 (a)

1 ()

2 (c)

2 (b)

1 (c)

3 (a)
HDD*1

HDD 3.5

4 (a)
3.5”SSD*1

SSD 2.5

3 (c) 5.25

4 (c) 5.25

3(b)

4 (b)

2.5”SSD*2

1. 1 () ; 1 (b) ; 1 (c) 5,25”;
1(d)80.
2. 2() ;
2 (b) ; 2 (c) .

. : 5,25”, 3,5”, 2,5”.

3 () HDD 3,5”

;

3 (b) SSD2,5”; ;

3 (c) 5,25; ” HDD 3,5”.

.80:5,25”,3.,5;’5’,,225,;5; ”.

1 ( 1 (

4 () 1() HDD3,5,”2;5;

1 (

4 (b) 801(b) . SSD 2,5”:

1 (

1 (c) ;

4 (c) 1(d) 5,25” SSD 2,5”.

11

()

RU

()

POWER . . . .
USB 3.0 x 2
TYPE C x 1 HD-Audio

/

1

ODD

. 11

2

HDD

8

3

1

4

/

/ 5

1

/

/ 6

1

7

1

.

12

RU

80+ PFC /
, , ()

400W SFX

0.5 SECC

Micro SFX

1x 80

1.2 ( VDE)

1×24 pin

1×4 pin (12V)

SATA 2

4 pin MOLEX x 2

AC 230V/50Hz +3.3V +5V +12V1 +12V1 -12V +5Vsb

14A 20A 11A 13A 0.5A 2.5A

124

275

19

400

13

RU
,
, 5,25″ .

1 , . .

, , 2 5,25″.,, –
5,25”.

3 5,25”.

‘ 5,25″ .
.
‘4… ,

5 5,25” HDD.

HDD. . 6 ‘HDD. 5,25″ .7 .
.

8 .

9 5,25” – . VGA.

10 .

14 5,25″ HDD.

5,25″5,25″,, RU..VGA.VGA. .

1 .

2 .

3 .

4 .

, .
: : , . 1.
, . 2. , , –
. 3. , . 4. .
: : 1. , . 2. ,
. 3. 24- . 24- –
4- , 24-, 20- .
15

RU
. 24- , 24- .
b. 20- , 4- 24- 20- , 4- .
4. 8- +12V. a. 8- +12V,
8- . b. 4- ,
4- 8- 4- . 5. , PCI-Express SATA. a. CD-ROM/DVD-ROM. b. SATA SATA. c. PCI- Express PCI-Express. d. 4- . e. , . 6. , ON ( «I»).

: +10 ° ~ +40 °C. : -40 ° ~ +70 °C. ( ) : 20% ~ 85% . ( ) : 5% ~ 95% .

· . .
· 1, . , .
· 230 / 50 . +10 °, +40 °C. . , .
· 3.5 . · ,
. . · , –
. , , . .
16

RU
· . . , .
!
1. . . , .
2. .

, . 2) , , . 3) ,
. 4) , . 5) , ,
. 6) .
,
, . 2) , ,
, . 3) ,
. 4) .
17

EN

Product: computer case with PSU. Using: for placing components of personal computer system. Model: 2-S616-400.

SPECIFICATION

Type/Color Material Motherboards External 5.25” Internal 3.5” Internal 2.5” Expansion slots Included fans, mm
I/O Ports, buttons
Power supply Max VGA length, mm CPU cooler height, mm Dust filter Case position Size (WxHxL), mm Package size (WxHxL), mm Weight without package, kg Weight with package, kg County of origin Guarantee

Desktop/black Plastic, steel SGCC 0.5 Micro ATX/ITX 1 pcs 2 pcs 2 pcs 4 pcs Top panel: 1x 80 2xUSB 3.0,1xTYPE-C, HD Audio+MIC, Power, Reset 400 W low profile 78 horizontal / vertical 40099314 449155349 3,3 3,8 hina 12 months

18

EN DISCRIPTION

1 (d)

General case part

2 (a)

1 ()

2 (c)

Side panel (right) 1 (b)

2 (b)

3 (a)
HDD*1

HDD 3.5

3 (c) 5.25

3(b)

1 (c)

4 (a)
3.5”SSD*1

SSD 2.5

4 (c) 5.25

4 (b)

2.5”SSD*2

1. GENERAL CASE PART 1 () place for motherboard; 1 (b) place for power supply; 1 (c) place for optical drive 5,25”;
1(d)placefor 80mmfan.

2.R2E(A)RpClaAceSEfoPrAcNonEnLecting the power supply cable of the power supply; 2 (b) expansion slots for low profile VGA; 2 (c) place of exit of motherboard connectors.

INSTALLATION OF COMPONENTS. SLOTS: 5,25”, 3,5”, 2,5”.

3 () place and fixing of first HDD 3.5” under the frame above the power supply;

3 (b) place and fixing ofSSD2.5”totheinternalbay; ; 3 (c) the location of the5.25”opticaldriveandsecond; 3.5” HDD.

INSTALLATION OF COMPONENTS8.0SLOTS:5,25”,3.,5;5”,,225,;5; ”.

1 ( 1 (

4 () place and fixationof HDD13(.5)”; 5,25;

1 (

4 (b) place and fixationof two8021.(5b’)’ SSDs: simu.ltaneously in the internal compartment and

1 (

under the frame above the pow1e(cr)supply;

4 (c) the location of the 5.25” o1p(tdic) al drive and SSD 2,5”.

19

()

EN

BUTTONS ANDPORTS ()

POWER. . .
.

USB 3.0 x 2
TYPE C x 1

HD-Audio

COMPLETE SET

/

/ Number Itemname

1

ODD screew

Quantity pcs 11

2

HDD screew

8

3

Mainboard Distance Screew

1

4

Power Screew

4

/

/ 5

Power cord

1

/

/ 6

Power supply

1

7

Base for the vertical case position

1

Appearance and equipment of item can be supplemented or modified for the purpose of the improvement or for improvement of product quality.

20

EN
POWER SUPPLY SPECIFICATION

Model Case material Form factor Certification 80+ PFC Cooling Power cord Motheboard connector CPU connector Peripherals connector Peripherals connector /
Power total for lines, W Power total, W (maximum)

400W SFX

0.5 SECC

Micro SFX

Non

Fan 1x 80 mm

1.2 m Normal EU power cord (non-VDE)

1×24 pin

1×4 pin (12V)

SATA 2

4 pin MOLEX 2

AC 230V/50Hz +3.3V +5V +12V1 +12V1 -12V +5Vsb

14A 20A 11A 13A 0.5A 2.5A

124

275

19

400

21

EN
,
SYSTEMCOMPONENTS INSTALLATION, 5,25″ .

,

1 Takes down the foot Twists off the screw on the rearpanel to take down the side panel

,

2 Lsciereswthseocnatsh5ee,o25n5””t2h5ebtaabyl..etop Twists off two

3 Backward pulls the 5”25 on backward to take out.

‘ 5,25″ .
.
‘4oInusttaolfl tahnedoubn.sitnrsutcatllppieocweeornsutphepltyompapyant.aekl.e,

5 Puts slanting 5”25 bay revolution axis position on the rack.

HDD. . 6 Installsth’eharddisk5.,25″ .7 Installs CD drive.
.

8 Installs the motherboard.

9 Cages on the screw 5”25 revolving to the rack, and installs VGA card.

10 Lock the foot after (assemble the side panel)

22 5,25″ HDD.

..VGA.VGA. PEONWERSUPPLYINSTALLATION.

1 Take off the front panel.

2 Remove 2pcs screw, take down power supply.

3 Pull for ward the cable.

4 Assemble the power supply on the front plate and lock by 3pcs screw.

POWER SUPPLY INSTALLATION AND CONNECTION

Before you begin installation and start using the power supply, we propose to study current manual. Step A: Removing the power supply which was installed if necessary: If you are building a new system, go to step B. 1. Disconnect the AC power cord from the wall outlet or UPS, as well as from the existing power supply. 2. Disconnect all cables that connect power to the graphics card, motherboard, and other
peripherals. 3. Following the instructions for the system unit, remove the power supply. 4. Go to step B. Step B: Power supply installation: 1. Make sure that the AC cable of the power supply is not connected. 2. Following the instructions of the computer case operation guide, install the power supply unit
and fix it with screws from assembling kit. 3. Connect the 24-pin power cable. The general 24-pin power cable is equipped with a
removable 4-pin connector, which ensures compatibility with both 24-pin and 20-pin connectors on the motherboard. a. If the motherboard has a 24-pin connector, you can directly connect the 24-pin power cable from the power supply to it. b. If the motherboard has a 20-pin connector, divide 4-pin cable from the 24-pin connector and then connect the 20-pin cable to the motherboard without connecting the 4-pin connector.
23

EN
4. Connect 8-pin + 12V cable. a. If the motherboard is equipped with an 8-pin

12V connector, connect the cable with the 8-pin connector directly to the motherboard. b. If the motherboard has a 4-pin connector, divide 4-pin cable from the 8-pin connector and then connect the 4-pin cable directly to the motherboard.
5. Connect the peripheral cables, PCI-Express and SATA cables. a. Connect the peripheral cables to the power connectors of the hard drive and CD-ROM / DVD- ROM. b. Connect the SATA cables to the power connectors of the SATA hard drive. c. If necessary, connect the appropriate PCI-Express cables to the power connector on the PCI-Express graphics card. d. Connect peripheral power cables to any peripherals with a small 4-pin connector. e. Make sure all cables are securely connected.
6. Connect the AC power cable to the power supply and turn it on by turning the switch to the ON position (it is marked with an “I”).
ENVIRONMENT REQUIREMENTS
Operating temperature: +10 ° C ~ +40 ° C. Storage Temperature: -40 ° C ~ +70 ° C. Humidity (non-condensing) for operation: 20% ~ 85% relative humidity. Humidity (non-condensing) for storage: 5% ~ 95% relative humidity.
POWER SUPPLY IMPORTANT FEATURES
· Current power supply is a separate component of a personal computer. The PSU must be installed in the metal case of the system unit with sufficient electromagnetic shielding.
· The device has protection class 1, protective earth is directly connected to the metal case. When installing, make sure that the power supply is installed correctly.
· The power supply unit is intended for use in a 230 V / 50 Hz network with grounding. Minimum operating temperature +10 ° C, Maximum +40 ° C. Do not allow moisture to get on the device and do not use the device in rooms with high humidity. Do not forget that the power of the PSU decreases with increasing of temperature.
· The current loss must not exceed 3.5 mA. · During installation of the power supply, pay particular attention to ensuring effective
ventilation. Direct contact with the cooling fan is prohibited. · Do not attempt to disassemble the device yourself; there is a risk of electric shock. Inside
there are no parts that the user can repair, when parsing the PSU, you lose the warranty. Contact a service center by a specialist. · Consider the power consumption of the PC during assembly. Different configurations consume different amounts of energy. If the total power consumption exceeds the power of the PSU, then the PC will not function properly or function at all.
WARNING!
1. The device is not intended for outdoor use. Use this PSU only in the office or at home. Please carefully read the user manual for all components of your PC before assembly.
2. Do not disassemble the device yourself under any circumstances.
24

EN OPERATING CONDITIONS AND PRECAUTIONS

Ensure that you have all the necessary parts before start to use case. 2) Its important to use gloves during assembling and prevent injures of your hands. 3) Dont use additional efforts when you fix components to prevent damage of case or case
mounting. 4) Make sure that all components of the product are intact and functioning properly. 5) Do not use abrasive, whitening cleaners to clean the product to avoid scratches and surface
damage. 6) Store and operate out of the reach of children and pets.
STORAGE, TRANSPORTATION AND UTILISATION
Transportation of product in original packing to avoid damages. 2) If components are already were installed in cases, please check how securely they are fixed
or remove it before preparation of case for transportation. 3) Avoid contact with moisture or water on the surface or inside of case to prevent corrosion
of material. 4) Utilization of case and it`s packing in accordance with utilization regulations in your country.
25

! ‘ 2, , , .
. .
1. , : , , , , -.*
2. . / `, .
3. , , – , .
4. , .
5. : · ; · ; · , , , , ; · , (, , .), , ( , , .); · , , ; · ; · ; · , .
6. 12 .

.
. , . __
«–» : . , 18-, , 04073, .: 0 800 300 345; (044) 230 34 84; 390 55 12 www.erc.ua/service

! 2, , , .
. .
1. , : , , , , . *
2. . / , .
3. , , – , .
4. , .
5. : · ; · ; · , , , , ; · , (, , .), , ( , , .) · , ; · ; · ; · , .
6. 12 .

.
. , . _____

WARRANTY CARD
Dear Buyer! Congratulations on your purchase of the 2E brand computer case with power supply, which was designed and manufactured in accordance with the highest quality standards, and we thank you for choosing this particular product.
We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.
1. Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: product model, date of sale, serial number of power supply, warranty service period, and the seller’s seal.

2. The product is intended for consumer use. When using the product in commercial activities, the seller / manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.
3. Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
4. The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
5. The product is removed from warranty service in the following cases: · misuse and non-consumer use; · mechanical damage; · damage caused by the ingress of foreign objects, substances, liquids, insects; · damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.) · damage caused by non-compliance of power and cable network parameters with state standards and other similar factors; · when operating equipment in the power supply network with a missing single ground loop; · in case of violation of seals installed on the product; · lack of serial number of the device, or inability to identify it.
6. The warranty period is 12 months from the date of sale.
Tear-off maintenance tickets are provided by an authorized service center.
The completeness of the product is checked. I have read the terms of the warranty service, no complaints. Customer Signature

Warranty card/ /
Product information/ / Product// Model/ Serial number/ / Seller Information/ / Trade organization name/ / The address// Date of sale/ / Seller stamp/ /

Coupon/ 3
Seller stamp/ /
Coupon/ 2
Seller stamp/ /
Coupon/ 1
Seller stamp/ /

Date of application/ / Cause of damage/ / Date of completion/ /
Date of application/ / Cause of damage/ / Date of completion/ /
Date of application/ / Cause of damage/ / Date of completion/ /