Lauben 600BG Glass Milk Frother User Guide

**Lauben 600BG Glass Milk Frother User Guide

**

SPECIFICATIONS AND FEATURES

• Model LBMFMGMF600BA
• Voltage 220–240 V~, 50/60 Hz
• Input power 600 W

SAFETY INSTRUCTIONS – GENERAL

PLEASE READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
KEEP THIS USER GUIDE FOR FUTURE REFERENCE.
THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY

• This appliance may be used by children aged 8 years or older and persons with reduced physical, sensory or mental abilities or lack of experience and knowledge, provided they are supervised or have been instructed in the safe use of the appliance and understand the potential hazards.
• Children must not play with the appliance.
• Cleaning and maintenance by the user must not be carried out by children unless they are at least 8 years old and supervised.
• Keep the appliance and its supply out of the reach of children under 8 years of age.
• If the power cord is damaged, it must be replaced by the manufacturer, its service technician or a similarly qualified person to avoid a dangerous situation. It is forbidden to use the appliance with a damaged power cord or plug.
• This appliance is designed for use in the home and similar areas such as:
  • kitchenettes in shops, offices and other workplaces;
  • agricultural premises;
  • hotels, motels and other residential spaces for guests;
  • bed and breakfast establishments.

WARNING: Avoid spilling the plug.

• Clean the surfaces that come into contact with liquids according to the instructions in this manual.

WARNING: Incorrect use may lead to a risk of injury.

• The heat element surface contains residual heat after use.
• This appliance must not be immersed during cleaning.
• Always disconnect the appliance from the power supply when leaving it unattended and before assembly, disassembly or cleaning.
• Use the glass milk jug only with the supplied appliance base. Do not use the base with another jug or use the glass jug with another base.
• The appliance is not designed to operate via an external time switch or remote control.
• Do not immerse the appliance, supply cable or plug in water or other liquids.

CAUTION: HOT SURFACE, DO NOT TOUCH

WARNING: HOT SURFACE!

SAFE USE OF THE APPLIANCE

• The appliance is intended for indoor use only. Do not use it outdoors.
• Do not use it for commercial purposes.
• The appliance is designed for heating and frothing milk. Do not use it for any purpose other than that for which it is intended. It is forbidden to convert the appliance for another purpose. Do not use any accessories that are not recommended by the manufacturer.
• Only use the appliance in a room where the temperature does not drop below 0 °C.
• Follow the instructions in this User Guide.

ELECTRICAL SAFETY

• Before plugging the power plug in, make sure that the voltage on the rating plate of the appliance matches the voltage at your mains socket. If in doubt, consult a qualified electrician.
• Only plug the power plug into a properly earthed mains socket.
• Do not use extension cords, multiple sockets or adapters.
• It is recommended to connect the appliance to a separate electrical circuit.
• Do not immerse the appliance, power cord or plug in water or any other liquid. There is a risk of electrical injury.
• Do not touch the plug with wet or damp hands, especially when plugging in or unplugging from the power supply.
• Route the power cord so that it does not touch hot surfaces, so that it cannot be stepped on or tripped over. Make sure that the power cord does not hang over the edge of the table or worktop, get tangled, bend excessively or touch sharp objects.
• Switch off the appliance, unplug the power plug from the mains socket whenever you leave it unattended,  do not use it,before moving, cleaning or storing it. Allow the appliance to cool down before cleaning.
• Disconnect the power cord from the mains socket by pulling the plug, not by pulling the cord. There is a risk of damage to the power cord or the mains socket

SAFE PLACEMENT OF THE APPLIANCE

• Always place the appliance on a dry, flat and solid surface, e.g. a kitchen worktop.
• Do not place the appliance on window sills, sink drains or unstable surfaces. Always place it on a stable, flat and dry surface.
• Do not place the appliance on or near an electric or gas stove, or near open flames or appliances that are sources of heat.
• Do not use the appliance near a bathtub, sink, swimming pool or other water source.
• The appliance switches itself off automatically. If the appliance needs to be switched off, press the start/stop button. Do not switch off the appliance by removing the power plug from the mains socket.
• Ensure that there is sufficient clearance around the appliance to ensure air circulation.
• Do not place the appliance near walls or other appliances. The minimum distance is 10 cm on all sides.
• Do not use the appliance in a place where flammable, volatile or explosive substances are used or stored.

SAFE APPLIANCE OPERATION

• Do not touch the heating element when it is hot, there is a risk of serious burns.
• Do not block the ventilation openings of the appliance. There is a risk of overheating and subsequent damage.
• Do not leave the appliance unattended while in operation.
• Do not use the appliance empty without milk in the jug.
• Use only chilled milk. When filling the jug, always observe the minimum and maximum markings on the jug.
• Do not expose the jug to extreme temperatures. Do not pour cold water into a hot jug and vice versa.
• Do not expose the jug to impacts and make sure it doesn’t fall.
• Always hold the jug by its handle. Take extra care when pouring hot milk to avoid scalding yourself.

SAFE MAINTENANCE

• Follow the cleaning instructions in this User Guide.
• If the appliance, power cord or plug are damaged or the appliance is not working properly, stop using it and contact an authorised service centre. Do not carry out the repair yourself.
• Neither the manufacturer, the importer nor the dealer accepts liability for any damage caused by incorrect assembly or use of the product.
• The socket must be located close to the appliance and must be easily accessible.

PRODUCT DESCRIPTION

1. Transparent lid
2. Silicone gasket
3. Glass jug
4. Frothing attachment
5. Base
6. Control Panel
7. Power cord

DESCRIPTION OF THE CONTROL PANEL

1. Light icons for milk preparation
2. Milk frothing selection button
3. Start/stop button

BEFORE FIRST USE

• Remove all packaging and foils and store them for later use.
• Wipe the base with a soft sponge slightly dampened in warm water.
• Wash the jug, frothing attachment, lid and silicone seal in warm water with a little kitchen detergent. Rinse and wipe dry. Always make sure that the outer base is clean and dry before inserting the jug into the base.

PLACEMENT

• Place the frother base on a firm, level and dry surface well away from the mains socket. Do not place it on an unstable or tilted surface. Do not place it near heat-sensitive objects (e.g. curtains, drapes, etc.).
• Ensure that there is sufficient clearance around the frother to ensure air circulation.

PURPOSE OF USE

The frother is designed for heating and frothing milk, mixing hot cocoa, hot chocolate and other milk drinks.

INSTRUCTIONS FOR USE

Setting up the Frother

1. Place the frother base on a firm, flat and dry surface.
2. Place the frothing attachment on the tip at the bottom of the jug.
3. Put the lid on. Make sure the lid fits snugly.
4. Place the jug on the base.

Connecting to Power Supply

• Fully unwind the power supply.
• Only plug the power cord plug into a properly earthed mains socket.

Using the Frother

1. Remove the jug from the base and remove the lid. Pour the desired amount of milk into the jug. When filling, always observe the minimum and maximum markings shown here. Never overfill the jug.
2. Put the lid on and place the jug on the base.
3. Plug the power plug into the mains socket and the default milk frothing icon (hot milk with rich foam) will light up. If you make no selections or do not start the frother, it will switch to standby mode after 30 seconds.
4. Press the button repeatedly to select the desired milk frothing. Each press will illuminate the corresponding light icon. For more information on milk frothing, see the table below.
5. Press the button to start the frother.
6. When making hot chocolate, pour the chocolate in after the frother has been started. The amount of  chocolate should be approximately 10% of the milk volume.
7. The frother automatically stops when the frothing is complete. The white icon will flash for 30 seconds.
8. Disconnect the power plug from the mains socket.
9. Remove the jug, remove the lid and pour the prepared milk into the cup.
10. Clean the frother according to the instructions in the “Cleaning and Maintenance” section.

If you need to end the frother early, press the button briefly.

Note: Each press of the button is accompanied by a short beep.

Note: In the event of a fault (idle frothing, no jug installed, overheating, short circuit, etc.), all lights will flash 5 times.

Milk Frothing Table

Function| Icon| Maximum volume| Frothing time| Temperature| Milk foam volume
---|---|---|---|---|---
Hot milk with rich foam| | 150 ml| 120 seconds| 65 ± 5°C| a 70%
Hot milk with less foam| | 150 ml| 300 seconds| 65 ± 5°C| a70%
Mixing and frothing milk without heating| | 150 ml| 300 seconds| —| s50%
Heating and mixing milk| | 250 ml| 420 seconds| 75 ± 5°C| s 10%
Preparation of hot chocolate| | 250 ml| 420 seconds| 75 ± 5°C| s 10%

Note: The frothing time in the table is only indicative and depends on the initial temperature of the milk, ambient temperature, etc.

Tips and Advice on Frothing Milk

• When preparing coffee drinks with milk, we recommend starting the frother first and preparing the coffee drink while the milk is frothing.
• A richer foam is achieved when using chilled whole milk (fat content 3% or more).
• Cold milk is not cooled during frothing.
• The milk is heated to a temperature of approximately 65°C (± 5°C). It is the ideal temperature to ensure the perfect taste of your coffee.
•  Clean the jug and frothing attachment after each use to prevent the formation of unwanted odours.

CLEANING AND MAINTENANCE

• Make sure the frother is switched off before cleaning and maintenance. Disconnect the power plug from the mains socket and allow it to cool completely.
• For hygiene reasons, the jug should be cleaned after each use. Otherwise, there is a risk of the milk residue drying out, which can cause unpleasant odours and the formation of unwanted micro-organisms that can be harmful to health.

Warning: Do not immerse the appliance, power cord or plug in water or any other liquid. There is a risk of electrical injury.

Note: Do not use any abrasive or chemical cleaners, benzene, solvents, alcohol, etc. for cleaning. Do not use wire cloths or other tools that may scratch the surface.

Cleaning the Jug and Lid

• Remove the seal from the rim of the lid and remove the frothing attachment from the jug.
• Wash the jug, frothing attachment, lid and silicone seal in warm water with a little kitchen detergent. Rinse and wipe dry.
• The jug and lid can be washed in the dishwasher in the upper basket.

Frother Base

• Wipe the base with a soft sponge slightly dampened in warm water. Wipe dry with a clean cloth.

Storage

• Before storing, clean the frother according to the instructions above.
• Store the frother in its original box or other packaging in a dry and shady place out of reach of children and pets.

The symbol on the product or in the accompanying documentation means that used electrical or electronic products must not be disposed of with municipal waste. In order to dispose of the product properly, please take it to the designated collection points where it will be accepted free of charge. By disposing of this product correctly, you will help conserve valuable natural resources and help prevent potential negative environmental and human health impacts that could result from improper waste disposal. For more details, contact your local authority or nearest collection point. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Information for users on the disposal of electrical and electronic equipment (corporate and business use): For proper disposal of electrical and electronic equipment, ask your dealer or supplier for details

Information for users on the disposal of electrical and electronic equipment in other countries outside the European Union: The above symbol is valid only in European Union countries. For proper disposal of electrical and electronic equipment elsewhere, ask your local authorities or equipment dealer for details. All this is represented by the crossed-out container symbol on the product, packaging or printed materials.

Please contact your dealer for warranty repairs. In case of technical problems and questions, please contact your dealer who will inform you of the next steps. Observe the rules for working with electrical equipment. The user is not authorised to disassemble the equipment or replace any of its components. There is a risk of electrical injury if the covers are opened or removed. Incorrectly assembling and reconnecting the equipment also exposes you to the risk of electrical injury.

The warranty period for products is 24 months, unless otherwise
stated. The warranty does not cover damage caused by nonstandard use, mechanical damage, exposure to aggressive
conditions, handling contrary to the User Guide and normal wear and tear. The warranty period for the battery is 24 months, for its capacity 6 months. For more information on the warranty, please visit www.elem6.com/warranty

Neither the manufacturer, importer nor distributor shall be liable for any damage caused by the installation or improper use of the product.

EU Declaration of Conformity

elem6 s.r.o. hereby declares that the Lauben Glass Milk Frother 600BG complies with the essential requirements and other relevant provisions of Directive 2014/30/EU and 2014/35/EU. All Lauben products are intended for sale without restriction in Germany, the Czech Republic, Slovakia, Poland, Hungary and other EU member states. The full Declaration of Conformity can be downloaded from www.lauben.com/support/doc

Importers to the EU elem6 s.r.o., Braškovská 308/15, 161 00 Prague 6, Czech Republic

www.lauben.com

Manufacturer

TIGMON GmbH, Yorkstraße 22; 93049 Regensburg, Deutschland Printing errors and changes to the User Guide are subject to change.

References

• Lauben – Moderní kuchyňské spotřebiče

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>