Lauben 52BB Robot Laservac User Manual

: June 6, 2024
: Lauben

52BB Robot Laservac

LAUBEN ROBOT LESERVAC 52BB

Lauben Robot LaserVac® 52BB – User manual

APPLIANCE SPECIFICATIONS

Due to ongoing improvement and product updates, changes may occur. The manufacturer reserves the right to update specifications.

SAFETY INSTRUCTIONS

Read this manual carefully before using the appliance and retain it for future reference. Read the safety instructions thoroughly before using this product, and always follow them carefully. Failure to follow the instructions in this manual may result in personal injury or damage to the equipment or your property.
This appliance is intended for domestic use only.
WARNING: Children over the age of 8 and persons with limited physical, sensory or mental capabilities, or lack of experience and knowledge, should only use this appliance under direct supervision. Children should never play with the appliance: it is not a toy. Cleaning and maintenance should not be performed by children without direct supervision.
■ The appliance should only be disassembled by authorized technicians. Users should not disassemble or attempt to repair the product.
■ Use only the original battery and AC adapter for charging. Using an unsuitable power adapter may result in electric shock, fire, or damage to the product or property.
■ Do not touch the power cord, plug or power adapter with wet hands.
■ Do not use this appliance in a wet or humid environment, such as a bathroom or laundry room.
■ Before using the appliance, remove curtains and any loose objects from the floor that could become tangled in the wheels.
■ Clear the floor of any objects before use (remove all fragile objects and power cords, clothing, paper, loose cables, and lift curtains and drapes off the ground to prevent possible accidents).
■ If using the appliance in a space where there is a risk of it falling freely (e.g., on landings, stairs, etc.), the appliance should be operated under supervision; in such cases, it is recommended that you use other safeguards, such as barrier tape or a virtual wall.
■ Keep the appliance away from lit cigarettes, lighters, matches or other flammable substances.
■ Never use the appliance to clean flammable or volatile substances, such as petrol.
■ The device is intended for indoor use; it should not be used outdoors.
■ Do not clean the device unless it is fully charged.
■ Do not bend or squeeze the flexible power cord too hard with heavy or sharp objects.
■ Do not sit on the appliance or place objects on it. Keep children and pets away when the appliance is in operation.
■ Avoid placing the appliance where it is liable to fall (e.g., on tables, chairs, etc.).
■ Turn off the appliance during transportation or if it will not be used for a longer time.
■ Before charging, make sure that the AC adapter is properly connected to the outlet.
■ Inform all persons in the household when the appliance is in operation, so that they do not trip over it.
■ If the dust bin is full, empty it before using the device.
■ Only water should be used in the water container for wet wiping; detergents and other chemicals can cause damage to the appliance.
■ After each wipe, empty the container and let it dry.
■ Use this appliance in temperatures between 0 ° C and 40 ° C.
■ Do not use this device for a longer time in an environment with high temperatures or in direct sunlight, as the rays may adversely affect the operation of the sensors.
■ Never remove or attempt to remove the battery from the device yourself. If the battery needs to be replaced, you should contact your dealer, distributor or an authorized service center. Instructions in this manual relating to removing the battery are intended for use specifically by your service provider or an independent qualified professional.
■ Batteries must not be disposed of in fire. Do not disassemble, compress, or puncture the battery.
■ If you wish to dispose of the appliance, the designated collection point will help you to dispose of or recycle the appliance, including the battery.
■ Unplug the adapter before cleaning or maintaining the device.
■ Use only the detachable AC adapter provided with this appliance to charge the battery.
■ When removing the battery, the device must be disconnected from the power supply.

BATTERY SAFETY WARNINGS

Warning

■ Never remove or attempt to remove the battery from the appliance yourself. If the battery needs to be replaced, contact your service provider or independent qualified service provider. These instructions have been prepared exclusively for use by your service provider or independent qualified professional.
■ FOR YOUR OWN SAFETY, DO NOT ATTEMPT TO REMOVE THE BATTERY YOURSELF AND NEVER DISPOSE OF IT IN FIRE. DO NOT DISASSEMBLE, PRESS, OR PUNCTURE THE BATTERY.

Battery removal

1. Use a screwdriver to remove the screws from the battery cover.
2. Remove the battery cover.
3. Seize the insulating tape on both sides of the battery and lift out the battery.
4. Disconnect the connector between the battery and the robotic vacuum cleaner.

Battery disposal

■ Proper disposal of batteries from this appliance (valid in countries with designated battery return systems.)
■ The symbols on the battery, manual and packaging indicate that the batteries used in this appliance must not be disposed of with normal household waste. The chemical symbols Hg, Cd and Pb indicate that the battery contains mercury, cadmium or lead in excess of the reference levels in EC Directive 2006/66.
■ The battery in this appliance must not be replaced by the consumer.

DISPOSAL OF OLD APPLIANCES

■ Directive 2012/19/EU on waste from electrical and electronic equipment (WEEE) requires that old appliances not be disposed of with normal municipal waste. For the disposal of old appliances, use the designated collection point set up for this purpose to optimize the recovery and recycling of the materials contained in it and to reduce the impact on human health and the environment.
■ The dustbin symbol is used on all products to remind the consumer of the obligation to return these appliances to the designated collection point. Consumers can contact their local authority or retailer for information on how to dispose of old appliances. When disposing of old appliances, remove anything that could be dangerous and unplug the power cord from the appliance.

Danger

■ Never attempt to use the device if it shows signs of damage or if the power cord or plug is damaged. If the power cord is damaged, it must be replaced by an after-sales service to avoid any risk.
■ Repairs to the device may only be carried out by qualified and authorized persons. Any repairs that do not meet these standards can significantly increase risk to the user!
■ In the event of damage due to improper handling, deterioration or attempted repair by third parties, the product warranty is void. This also applies to normal wear and tear and all appliance accessories.

Important!

We recommend that you keep the packaging for the appliance for at least the length of the warranty period. Without the original packaging, the warranty is void.

KEEP OUT OF REACH OF CHILDREN

Never allow children to play with the robotic vacuum cleaner.

WARNING

Remove objects from the floor so that they do not get the wheels and jam the robotic vacuum cleaner.
Do not use the robotic vacuum cleaner to vacuum liquids
To prevent damage to the radar, do not squeeze or lift the radar cover.
When cleaning the floor, use barrier tape to prevent the robotic vacuum cleaner from falling.

PACKAGE CONTENTS

Robot
Charging station/power adapter
2in 1 water tank with electronic
pump and dust bin
Carpet brush
Side brushes
Mop cloth
HEPA filter
Dust bin brushes
Remote control

APPLIANCE DESCRIPTION

Front of the robotic vacuum cleaner

Bumper
AUTO button (start, pause)
Wi-Fi button
Wall sensor
Laser
Main switch
Back of the robotic vacuum cleaner
Fall sensor
Charging contact
Side brushes
Universal wheel
Wheels.
Rotary brush
Dust bin

Remote control

ON/OFF button
Directional buttons
Suction power

Charging station/Power adapter

Plug
Power port
Power indicator
Charging contacts
Dust bin
Top cover
HEPA filter
Filter
Dust bin clip
Dust depository

2 in 1 Water tank with electro!

Dust bin holder / clip
HEPA filter.
Filter
Dust depository
Insert water here
Water tank with electronic pump.
Electrical contact
Mop cloth

INSTALLATION

1. Remove the protective foam on both sides
2. Install the side brushes. Insert the right and left side brushes into the holes shown.

CHARGING THE APPLIANCE

Place the charging station in a suitable place and connect the power adapter. Place the charging station against the wall on a flat
floor; remove any obstacles within 0.5 m of both sides and 1.5 m of the front of the station.
Switch settings | – on, 0 – off.
Charging: Make sure that the electrode on the robotic vacuum cleaner is aligned with the charging contact on the charging station.

The AUTO button will flash white.
When charging for the first time, charge for more than 5 hours.

INSTRUCTIONS FOR USE

Indicator light status

STARTING A CLEANING PROGRAM

Automatic charging: after cleaning, the robotic vacuum cleaner will automatically return to the charging station.

Manual charging: click on the,” button in the application to charge. The robotic vacuum cleaner will automatically return to the charging station

Note: If the robotic vacuum cleaner is unable to find the charging station, it will return to the starting position. Please place the robot on the charging station manually.

TURNING ON/STARTING A CLEANING

PROGRAM/PAUSE

Turning on the appliance

Turn on the power switch. The AUTO light ® on means that
start-up is complete and the robotic vacuum cleaner has entered
standby mode

Starting a cleaning programme

Method 1: After switching on, briefly press the AUTO button on
the robotic vacuum cleaner to start cleaning,

Method 2: Press the ON/OFF button on the remote control or app
to start cleaning.

Notes:

The robotic vacuum cleaner must not be used to clean up
liquids, as this could damage the unit.
If the battery level is too low, the robot vacuum cleaner will not start cleaning. Charge the battery before cleaning.
During a cleaning program, the robotic vacuum cleaner will automatically return to the charging station if battery is low. It will automatically resume cleaning when charging is complete.

Before starting a cleaning program, please remove all objects
(eg, electrical cables, wires, toys, etc, from the floor to prevent damage during cleaning.

Pause

Method 1: While the robotic vacuum cleaner is in operation, briefly
press the AUTO button on the robot to pause cleaning.

Method 2: In the application, click the pause button to pause
cleaning.

CLEANING MODE

1. Automatic cleaning mode

Description: In standby mode, if you press the AUTO button on the main part of the robotic vacuum cleaner or press the ON/OFF”
button in the application, the robot will switch to automatic cleaning mode. The robot will start cleaning along the wall and will clean
a 4×4 m? area in zigzag mode, and then move to the next 4×4 m? area

Suitable environment: Regular cleaning mode suitable for home environments

2. MAX cleaning mode

Description: Press the MAX button in the application to start this powerful cleaning mode. The robotic vacuum cleaner will move
more slowly when cleaning the floor and will increase suction levels, as well as speeding up the rotation of the main brush for a more
thorough cleaning,

Suitable environment: Areas needing more intensive cleaning.

Note: If the robotic vacuum cleaner is unable to find the charging station, it will return to the starting position. Please place the robot
on the charging station manually.

3. ECO Mute mode
Description: Press the MUTE button in the application to enter the noise reduction mode: the robot will slow down its movement and
the speed of rotation of the main brush and reduce its suction power to minimize noise levels.

Suitable environment: Areas needing less intensive cleaning.

4, Setting a cleaning time
Description: Set the cleaning time after which the robot returns to the charging station Procedure: Setting the cleaning time in the
Lauben Robot Vacuum application.

5. Area cleaning mode

Description: Based on an existing completed household map, you can press ,Area” in the application on the map page, select the size
and location of the destination area, confirm and start cleaning. The robot will move directly to the target cleaning area.

Procedure: Starting cleaning after selecting an area in the Lauben Robot Vacuum application (maximum 5 areas)

Suitable environment: Small contaminated area.

6. “Restricted area” mode

Description: Based on an existing completed household map, press restricted area” in the application on the map page, select the
size and location of the restricted area, confirm and start cleaning, The robot will clean the entire area of the household apart from
the restricted area.

Procedure: Set a restricted area in the Lauben Robot Vacuum application,

Suitable environment: carpet / staircase.

Notes:

The robot may enter the restricted area if there are positioning errors, sensor deviations, etc.
If a cleaning schedule is replanned, the restricted area setting will no longer be valid.

Downloading and installing the app

Search “Lauben Robot Vacuum” in the App Store.

Log in/registration: Go to the HOME page, click on, log in / register” and follow the instructions to register.
‘Adding a device: Go to the home” page, and click on, +” to add a robot model.

Notes:

Make sure your mobile phone is connected to a WIFI network (currently only 2.4G networks are supported).
After installation is complete, fill out the registration form, log in, and set up the network according to the instructions in the application guide.

2 IN 1 WATER TANK WITH ELECTRONIC PUMP AND DUST BIN

1. Filling the water tank
The water tank and dust bin operate in an integrated electronic way. Remove the dust bin before filling the tank with water. Open the
side stopper on the water tank, fill the tank with clean water, refasten the stopper and then insert the water tank back into the dust

2. Installing the mop cloth
Moisten the mop cloth, squeeze it so that water no longer drips from it and then fasten it under the water container.

3. Installing the 2 in 1 water tank and dust bin
Press the button to insert the container.

Notes:

Do not use a wet mop on carpets.
Do not use a wet mop unless you are at home to supervise it
For best results, it is recommended that you use the mopping function after every third clean with the robotic vacuum cleaner.