Lauben 17GG Glass Electric Kettle User Guide
- June 1, 2024
- Lauben
Table of Contents
Lauben 17GG Glass Electric Kettle User Guide
LAUBEN GLASS ELECTRIC KETTLE 17GG
User Guide – translation of the original user guide
User Guide in Original Version
SPECIFICATIONS AND FEATURES
Model | LBEKMGEK17GGA |
---|---|
Voltage | 220–240 V~, 50–60 Hz |
Input power | 1,850–2,200 W |
Kettle volume | 1.7 l |
SAFETY INSTRUCTIONS – GENERAL
PLEASE READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
KEEP THIS USER GUIDE FOR FUTURE REFERENCE.
THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY.
- This appliance may be used by children aged 8 years or older and persons with reduced physical, sensory or mental abilities or lack of experience and knowledge, provided they are supervised or have been instructed in the safe use of the appliance and understand the potential hazards.
- Children must not play with the appliance.
- Cleaning and maintenance by the user must not be carried out by children unless they are at least 8 years old and supervised.
- Keep the appliance and its supply out of the reach of children under 8 years of age.
- If the power cord is damaged, it must be replaced by the manufacturer, its service technician or a similarly qualified person to avoid a dangerous situation. It is forbidden to use the appliance with a damaged power cord or plug.
- This appliance is designed for use in the home and similar areas such as:
- kitchenettes in shops, offices and other workplaces;
- agricultural premises;
- hotels, motels and other residential spaces for guests;
- bed and breakfast establishments.
- If the kettle is overfilled, hot water may splash out.
- The kettle must only be used with its base.
WARNING: Avoid spilling the plug.
Clean the surfaces that come into contact with water according to the instructions in this manual.
WARNING: Incorrect use may lead to a risk of injury.
- The heat element surface contains residual heat after use.
- This appliance must not be immersed during cleaning.
- Always disconnect the appliance from the power supply when leaving it unattended and before assembly, disassembly or cleaning.
- The appliance is not designed to operate via an external time switch or remote control.
- Do not immerse the appliance, supply cable or plug in water or other liquids.
SAFE USE OF THE APPLIANCE
- The appliance is intended for indoor use only. Do not use it outdoors.
- Do not use it for commercial purposes.
- The appliance is designed to heat drinking water. Do not use it for any purpose other than that for which it is intended. It is forbidden to convert the appliance for another purpose. Do not use any accessories that are not recommended by the manufacturer.
- Only use the appliance in a room where the temperature does not drop below 0 °C.
- Follow the instructions in this User Guide.
ELECTRICAL SAFETY
- Before plugging the power plug in, make sure that the voltage on the rating plate of the appliance matches the voltage at your mains socket. If in doubt, consult a qualified electrician.
- Only plug the power plug into a properly earthed mains socket.
- Do not use extension cords, multiple sockets or adapters.
- It is recommended to connect the appliance to a separate electrical circuit.
- Do not immerse the appliance, power cord or plug in water or any other liquid. There is a risk of electrical injury.
- Do not touch the plug with wet or damp hands, especially when plugging in or unplugging from the power supply.
- Route the power cord so that it does not touch hot surfaces, so that it cannot be stepped on or tripped over. Make sure that the power cord does not hang over the edge of the table or worktop, get tangled, bend excessively or touch sharp objects.
- Switch off the appliance, unplug the power plug from the mains socket whenever you leave it unattended, do not use it, before moving, cleaning or storing it. Allow the appliance to cool down before cleaning.
- Disconnect the power cord from the mains socket by pulling the plug, not by pulling the cord. There is a risk of damage to the power cord or the mains socket.
SAFE PLACEMENT OF THE APPLIANCE
- Always place the appliance on a dry, flat and solid surface, e.g. a kitchen worktop.
- Do not place the appliance on window sills, sink drains or unstable surfaces. Always place it on a stable, flat and dry surface.
- Do not place the appliance on or near an electric or gas stove, or near open flames or appliances that are sources of heat.
- Do not use the appliance near a bathtub, sink, swimming pool or other water source.
- The appliance switches itself off automatically. If the appliance needs to be switched off, switch the on/off button to the “off” position. Do not switch off the appliance by removing the power plug from the mains socket.
- Ensure that there is sufficient clearance around the appliance to ensure air circulation.
- Do not place the appliance near walls or other appliances. The minimum distance is 10 cm on all sides.
- Do not use the appliance in a place where flammable, volatile or explosive substances are used or stored.
SAFE APPLIANCE OPERATION
- Hot steam may escape from the appliance when it is in operation. Make sure there are no objects sensitive to hot steam near the appliance.
- Do not touch the heating element when it is hot, there is a risk of serious burns.
- Do not block the ventilation openings of the appliance. There is a risk of overheating and subsequent damage.
- Do not leave the appliance unattended while in operation.
- Do not use the appliance empty and without water.
- Use only clean drinking water. When filling the kettle, always observe the minimum and maximum markings on the kettle.
- Do not expose the kettle to extreme temperatures. Do not pour cold water into a hot kettle and vice versa.
- Do not expose the kettle to impacts and make sure it doesn’t fall.
- Always hold the kettle by the handle. Take extra care when pouring hot water to avoid scalding yourself.
SAFE MAINTENANCE
- Follow the cleaning instructions in this User Guide.
- If the appliance, power cord or plug are damaged or the appliance is not working properly, stop using it and contact an authorised service centre. Do not carry out the repair yourself.
- Neither the manufacturer, the importer nor the dealer accepts liability for any damage caused by incorrect assembly or use of the product.
- The socket must be located close to the appliance and must be easily accessible.
PRODUCT DESCRIPTION
- Kettle lid
- Spout
- Backlight
- Base
- Button to open the lid
- Handle
- Watermark
- On/Off button
BEFORE FIRST USE
- Remove all packaging and foils and store them for later use.
- Wipe the kettle and the base with a soft sponge slightly dampened in warm water.
- We recommend boiling water in the kettle and pouring it out before first use. Follow the instructions in the “Using the Kettle” section. This process should be done at least twice.
PLACEMENT
- Place the kettle on a firm, level and dry surface well away from the mains socket. Do not place it on an unstable or tilted surface. Do not place it near heat-sensitive objects (e.g. curtains, drapes, etc.).
- Ensure that there is sufficient clearance around the kettle to ensure air circulation.
PURPOSE OF USE
- The kettle is designed for heating drinking water.
INSTRUCTIONS FOR USE
Connecting to Power Supply
- Release the power cord from the bottom of the base and unwind it completely. Insert the power cord into the grip on the bottom of the kettle.
- Only plug the power cord plug into a properly earthed mains socket.
Using the Kettle
- Press the lid release button to open the lid. Pour the desired amount of water into the kettle. When filling the kettle, always observe the minimum and maximum markings shown here. Never overfill the kettle.
- Close the lid with your hand until you hear a click.
- Place the kettle on the base.
- Press the on/off button down to the on position. The kettle starts and the backlight turns on.
- The kettle automatically switches off when the water is boiled. The backlight goes off and an audible warning sounds.
- Pull the power plug out of the socket.
- Remove the kettle from the stand and pour the water into the cup
Warning: Be very careful not to scald yourself when pouring hot water.
- If you need to switch the kettle off earlier, push the on/off button up to the off position. The kettle switches off and the backlight goes out.
- We recommend letting the kettle cool for approximately 5 minutes before restarting. You can speed up the cooling process by opening the lid.
CLEANING AND MAINTENANCE
Make sure the kettle is switched off before cleaning and maintenance. Disconnect the power plug from the mains socket and allow it to cool completely.
Warning: Do not immerse the appliance, power cord or plug in water or any other liquid. There is a risk of electrical injury.
Note: Do not use any abrasive or chemical cleaners, benzene, solvents, alcohol, etc. for cleaning. Do not use wire cloths or other tools that may scratch the surface.
Cleaning the Kettle
Wipe the kettle and the base with a soft sponge slightly dampened in warm water.
Descaling
- The need for descaling depends on the hardness of the water you are heating and how often you use the kettle.
- Scale and debris can cause the kettle to shut off before the water reaches the boiling point. At the same time, water boiled in this way can spoil the beverage being prepared.
- To descale the kettle, we recommend using commercially available descaling products. Therefore, follow the instructions on the packaging or in the product’s accompanying documentation.
- Do not use vinegar or other substances for descaling.
Storage
- Before storing, clean the kettle according to the instructions above.
- Store the kettle in its original box or other packaging in a dry and shady place out of reach of children and pets.
1. The symbol on the product or in the accompanying documentation means that used electrical or electronic products must not be disposed of with municipal waste. In order to dispose of the product properly, please take it to the designated collection points where it will be accepted free of charge. By disposing of this product correctly, you will help conserve valuable natural resources and help prevent potential negative environmental and human health impacts that could result from improper waste disposal. For more details, contact your local authority or nearest collection point. Improper disposal of this type of waste may result in fines in accordance with national regulations.
Information for users on the disposal of electrical and electronic equipment (corporate and business use): For proper disposal of electrical and electronic equipment, ask your dealer or supplier for details.
Information for users on the disposal of electrical and electronic equipment in other countries outside the European Union: The above symbol is valid only in European Union countries. For proper disposal of electrical and electronic equipment elsewhere, ask your local authorities or equipment dealer for details. All this is represented by the crossed-out container symbol on the product, packaging or printed materials.
2. Please contact your dealer for warranty repairs. In case of technical problems and questions, please contact your dealer who will inform you of the next steps. Observe the rules for working with electrical equipment. The user is not authorised to disassemble the equipment or replace any of its components. There is a risk of electrical injury if the covers are opened or removed. Incorrectly assembling and reconnecting the equipment also exposes you to the risk of electrical injury.
The warranty period for products is 24 months, unless otherwise stated. The warranty does not cover damage caused by nonstandard use, mechanical damage, exposure to aggressive conditions, handling contrary to the User Guide and normal wear and tear. The warranty period for the battery is 24 months, for its capacity 6 months. For more information on the warranty, please visit www.elem6.com/warranty
Neither the manufacturer, importer nor distributor shall be liable for any damage caused by the installation or improper use of the product.
EU Declaration of Conformity
elem6 s.r.o. hereby declares that the Lauben Lauben Glass Electric Kettle 17GG complies with the essential requirements and other relevant provisions of Directive 2014/30/EU and 2014/35/EU. All Lauben products are intended for sale without restriction in Germany, the Czech Republic, Slovakia, Poland, Hungary and other EU member states. The full Declaration of Conformity can be downloaded from www.lauben.com/support/doc
Importers to the EU
elem6 s.r.o., Braškovská 308/15, 161 00 Praha 6, Česká republika
Manufacturer
TIGMON GmbH, Yorkstraße 22; 93049 Regensburg, Deutschland
Printing errors and changes to the User Guide are subject to change.
Documents / Resources
|
Lauben 17GG Glass Electric
Kettle
[pdf] User Guide
17GG, 17GG Glass Electric Kettle, Glass Electric Kettle, Electric Kettle,
Kettle
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>