2E 185 Mid Tower Computer Case Instruction Manual

: August 30, 2024
: 2E

Table of Contents

185 Mid Tower Computer Case
Specifications:
Product Usage Instructions:
1. Front Panel Ports Connection:
2. Installing Drives:
3. Motherboard Installation:
4. Power Supply and VGA Installation:
5. Cable Management:
- Frequently Asked Questions (FAQ):
1. How many drive bays does the case support?
2. What are the front panel ports available on the case?
3. What form factors of motherboards are compatible with this
4. How should I connect the front panel ports to the

185 Mid Tower Computer Case

Specifications:

Product Name: COMPUTER CASE OPERATION GUIDE UA RU EN 2E ALFA
(185-400)
Form Factor: Mid Tower
Supported Motherboard Sizes: ATX, Micro ATX
Drive Bays: 1 x 5.25”, 6 x 2.5”, 4 x 3.5”
Front Panel Ports: 2 x USB 2.0, 1 x USB 3.0, HD AUDIO+MIC,
Power, Reset, Power LED, HDD LED
Dimensions: 400mm x 310mm x 148mm
Weight: 3.3kg
Color: Black

Product Usage Instructions:

1. Front Panel Ports Connection:

Connect the front panel ports including USB ports, audio jacks,
power button, reset button, and LED indicators as per the provided
instructions.

2. Installing Drives:

Install the drives in the designated drive bays – 5.25”, 2.5”,
and 3.5” drives are supported.

3. Motherboard Installation:

Install the motherboard according to the form factor supported
(ATX or Micro ATX) and securely fasten it in place.

4. Power Supply and VGA Installation:

Install the power supply unit and VGA card in the designated
areas ensuring proper connections and alignment.

5. Cable Management:

Organize and manage cables neatly to ensure proper airflow and
avoid any obstructions.

Frequently Asked Questions (FAQ):

1. How many drive bays does the case support?

The case supports a total of 11 drive bays – 1 x 5.25”, 6 x
2.5”, and 4 x 3.5”.

2. What are the front panel ports available on the case?

The front panel ports include 2 x USB 2.0, 1 x USB 3.0, HD
AUDIO+MIC, Power button, Reset button, Power LED, and HDD LED
indicators.

3. What form factors of motherboards are compatible with this

case?

This case is compatible with ATX and Micro ATX form factor
motherboards.

4. How should I connect the front panel ports to the

motherboard?

Refer to the user manual for detailed instructions on connecting
the front panel ports to the respective headers on the
motherboard.

‘

COMPUTER CASE OPERATION GUIDE UA RU EN
2E ALFA (185-400)

UA

: ‘ . : ‘. : 2-185-400.

5.25” 2.5” 3.5”
,
, ,
, , , VGA, CPU , (), (), , ,

Mid Tower , ATX, Micro ATX 1 3 (4) . 2 (1) . 7 . : 2 120 : 2 120 : 1x 80 (90) : : : : : 2xUSB 2.0, 1xUSB 3.0, HD AUDIO+MIC, Power, Reset, Power LED, HDD LED 400 310 148 191x418x358 446x213x410 3.3 3.9 12

2

UA

()

1 () 6
5

4 (b)

2 ()

1 (b)

3

4 (a)

2 (b)

4 (b)

4 (a)

1 ()

2 (c)

1. :

4 (a)

1() 2xUSB 2.0, 1xUSB 3.0, HD AUDIO+MIC, Power, Reset, Power LED, HDD LED;

1(b) 5.25”;

1(c) .

2. : 2(a) ; 2(b) ; 2(c) c , , , .

3. : .

4. : 4(a) 2.5”; 4(b) 3.5”.

5. (): , . 6. ().

, .
3

UA ///

1

HDD

2

MB / SSD

3

/// ///

4 5

PSU / VGA

. 4 10 5 1
1

/ / . .

1 .

2 .

,

.///.///

/ /
4

3 . .

UA
4 5.25” ODD ( ODD .

2.5 / 2.5 / 2.5

5 3.5” HDD. HDD .

6 2.5” SSD. SSD , .

7 ’VGA/. PCI(

/

) VGA,

.

/ 5 /

UA

8 .

9 , , .

: ( ),

(),(. //). //

. 2) , , . 3) ,
. 4) ,
. 5) ,
. 6) .
,
, .
, .
, .
.
6

UA

, . : : , . 1. ‘
, . 2. ‘ , ,
. 3. ,
. 4. . : : 1. , . 2. ,
, . 3. ‘ 24- . 24- –
4- , , 24-, 20- . . 24- , 24- . b. 20- , ‘ 4- 24- 20- , 4- . 4. 8 ( 4)- + 12V. a. 8- + 12V, 8- . b. 4- , ‘ 4- 8- 4- . 5. ‘ , PCI-Express SATA. a. CD-ROM / DVD-ROM. b. SATA SATA. c. PCI-Express PCI-Express. d. – 4- . e. , . 6. , ON ( «I»).
7

UA
: +10 ° ~ +40 ° C. : -40 ° ~ +70 ° C. ( ) : 20% ~ 85% . ( ) : 5% ~ 95% .

· – ‘. .
· 1, . , , .
· 230 / 50 . +10 ° , +40 ° C. . , .
· 3.5 . · ,
. . · ,
. , . , . , . · . . , .
!
1. . . , , .
2. .
8

UA

80+ PFC 1×24 -pin, , 310 ± 10

ATX 400W 0.5 SECC ATX 1x 120 1.2 ( VDE)

1 4-pin, , 310 ± 10

4-pin Molex, , 310 ± 150

SATA x1, , 310 ± 150

::

/
,

AC 230V/50Hz PP : :

P22

P
+3.3V +5V +12V1 +12V1 323 14A 12420A 11A 27153A PP564554443333222564

SSS4SSSSSS44SSS4AAAAAAAAAAAATTTTTTTTTTTTAAAAAAAAAAAA

: :

, ()

6654

SATA S4ATA

400

./.

65 S4ATA 6 SATA

,

150 86 140

-12V 0.5A

+5Vsb 2.5A 19

9

RU

: . : . : 2-185-400.

5.25” 2.5” 3.5”
(),
,
, , , VGA, CPU , (xx), (xx), , ,

Mid Tower , ATX, Micro ATX 1 3 (4) . 2 (1) . 7 . : 2x 120 : 2x 120 : 1x 80 (90) : : : : : 2xUSB 2.0, 1xUSB 3.0, HD AUDIO+MIC, Power, Reset, Power LED, HDD LED 400 310 148 191x418x358 446x213x410 3.3 3.9 12

10

1 () 5

RU
() ()
6

4 (b)

2 ()

1 (b)

3

4 (a)

2 (b)

4 (b)

4 (a)

1 ()

2 (c)

4 (a) 1. :
1() 2xUSB 2.0, 1xUSB 3.0, HD AUDIO+MIC, Power, Reset, Powe rLED, HDD LED.; 1(b) 5.25”; 1(c) .
2. : 2(a) ; 2(b) ; 2(c) c , , , .
3. : .
4. : 4(a) 2.5”; 4(b) 3.5”;
5. (): , , .
6. ().

.
11

RU///

1

HDD

. 4

2

MB / SSD

10

3

PSU / VGA

5

///

4

1

///5

/ .

1

/

.

1 .

3 .

–

, .

.

/// ///

2 .

4 5.25” ODD .

,

ODD

/

.

12

5 3.5” HDD. HDD .

RU 7VGPAC.I ///)(-
VGA, .

6 2.5” SSD. SSD , .

8 .
/-
: ( ),
(),(. //).

9 , , . 13

RU

, . 2) , , . 3) ,
. 4) , . 5) , ,
. 6) .
,
, . 2) , ,
, . 3) ,
. 4)
.

, . : : , . 1.
, . 2. , , –
. 3. , . 4. . : : 1. , . 2. ,
. 3. 24- . 24- –
4- , 24-, 20- . . 24- , 24- . b. 20- , 4- 24- 20- , 4- . 4. 8- +12V.
14

RU
a. 8- +12V, 8- .
b. 4- , 4- 8- 4- .
5. , PCI-Express SATA. a.
CD-ROM/DVD-ROM. b. SATA SATA. c. PCI-Express
PCI-Express. d.
4- . e. , . 6. ,
ON ( «I»).

: +10 ° ~ +40 °C. : -40 ° ~ +70 °C. ( ) : 20% ~ 85% . ( ) : 5% ~ 95% .

· . .
· 1, . , .
· 230 / 50 . +10 °, +40 °C. . , .
· 3.5 . · ,
. . · , –
. , , . . · . . , .
15

RU
!
1. . . , .
2. .

80+ PFC 1×24 -pin, , 310 ± 10

ATX 400W 0.5 SECC ATX 1x 120 1.2 ( VDE)

1 4-pin, , 310 ± 10

4-pin Molex, , 310 ± 150

SATA x1, , 310 ± 150

SATA x1, ,

310 ± 150

::

/

AC 230V/50Hz PP : :

P22

P
+3.3V +5V +12V1 +12V1 332 , 14A 12420A 11A 27153A PP654456333322244455

SSS4SSS4SSSSSS44AAAAAAAAAAAATTTTTTTTTTTTAAAAAAAAAAAA

: :

, ()4566 S4SAATTAA

400

./.

56 4SATA 6 SATA

,

150 86 140

-12V 0.5A

+5Vsb 2.5A 19

16

EN

Product: computer case with PSU. Using: for placing components of personal computer system. Model: 2-185-400.

SPECIFICATION
Type Material Motherboards External 5.25” Internal 2.5” Internal 3.5” Expansion slots
Optional fans, mm
Included fans, mm
I/O Ports, buttons, indicators Power supply, W Max VGA length, mm CPU cooler height, mm Size (WxHxL), mm Package size (WxHxL), mm Weight without package,kg Weight with package,kg County of origin Warranty

Mid Tower Plastic, steel ATX, Micro ATX 1 3 (4) pcs 2 (1) pcs 7 pcs Front panel: 2 120 Side panel: 2 120 Rear panel: 1x 80 (90) Top panel: non
Front panel: non Side panel: non Rear panel: non Top panel: non 2xUSB 2.0, 1xUSB 3.0, HD AUDIO+MIC, Power, Reset, Power LED, HDD LED Non / on top 310 148 191x418x358 446x213x410 3.3 3.9 hina 12 months

17

EN DISCRIPTION
Front panel

1 () 5

Side panel (left)

Side panel (right) 6

General part

4 (b)

2 ()

1 (b)

3

4 (a)

2 (b)

4 (b)

4 (a)

1 ()

2 (c)

1. Front panel:

4 (a)

1() 2xUSB 2.0, 1xUSB 3.0, HD AUDIO+MIC, Power, Reset, Power LED, HDD LED.;

1(b) external 5.25”;

1(c) place for case fans.

2. Rear panel: 2(a) place for power supply; 2(b) place for case fan; 2(c) expansion slots for VGA, network card, modem, audio card etc.

3. General part: place for motherboard.

4. Internal Bays: 4(a) 2.5”; 4(b) 3.5”.

5. Side panel (left): perforation, place for case fans.

6. Side panel (right).

Appearance and equipment of item can be supplemented or modified for the purpose of the improvement or for improvement of product quality.

18

/// COMPLETESET

Number

Item name

1

HDD Screw

EN
Quantity pcs 4

2

MB / SSD screw

10

3

PSU / VGA Screw

5

///

4

Power cable

1

///

5

/

Power supply

1

/

SYSTEMCOMPONENTSINSTALLATION..

1 Remove side panels. Unscrew the screws from the rear panel, pull towards the rear of the case.

3 Power supply installation. Place the PSU on the top of the chassis and secure with screws.

/// ///

2 Motherboard installation.

4 5.25” ODD installation.

Place the case on the right side, place the

Place the ODD at the indicated

motherboardinplace andsecure with /location and secure withscrews. /

screws.

19

EN
5 3.5” HDD installation. Place the HDD at the indicated location and secure with screws.

7VGAinstallation//. /
Disconnect the PCI plug (from the back panel) and install VGA, then secure.

6 2.5” SSD. installation. Place the SSD on the right side of the inside part of the case as shown on the picture and secure with screws.

8 Case fans installation.
Installthefansin theindicatedlocation/s i(nfrothnet pasnee:lA). S(reecaurrpeatnheel)f,aBns(s. idepa//nel),C

9 I/O Ports, buttons, indicators. 20

EN
OPERATING CONDITIONS AND PRECAUTIONS

Ensure that you have all the necessary parts before start to use case. 2) Its important to use gloves during assembling and prevent injures of your hands. 3) Dont use additional efforts when you fix components to prevent damage of case or case
mounting. 4) Make sure that all components of the product are intact and functioning properly. 5) Do not use abrasive, whitening cleaners to clean the product to avoid scratches and surface
damage. 6) Store and operate out of the reach of children and pets.
STORAGE, TRANSPORTATION AND UTILISATION
Transportation of product in original packing to avoid damages. 2) If components are already were installed in cases, please check how securely they are fixed
or remove it before preparation of case for transportation. 3) Avoid contact with moisture or water on the surface or inside of case to prevent corrosion
of material. 4) Utilization of case and it`s packing in accordance with utilization regulations in your country.
POWER SUPPLY INSTALLATION AND CONNECTION
Before you begin installation and start using the power supply, we propose to study current manual. Step A: Removing the power supply which was installed if necessary: If you are building a new system, go to step B. 1. Disconnect the AC power cord from the wall outlet or UPS, as well as from the existing
power supply. 2. Disconnect all cables that connect power to the graphics card, motherboard, and other
peripherals. 3. Following the instructions for the system unit, remove the power supply. 4. Go to step B. Step B: Power supply installation: 1. Make sure that the AC cable of the power supply is not connected. 2. Following the instructions of the computer case operation guide, install the power supply
unit and fix it with screws from assembling kit. 3. Connect the 24-pin power cable. The general 24-pin power cable is equipped with a
removable 4-pin connector, which ensures compatibility with both 24-pin and 20-pin connectors on the motherboard. a. If the motherboard has a 24-pin connector, you can directly connect the 24-pin power cable from the power supply to it. b. If the motherboard has a 20-pin connector, divide 4-pin cable from the 24-pin connector and then connect the 20-pin cable to the motherboard without connecting the 4-pin connector.
21

EN
1. Connect 8-pin + 12V cable. a. If the motherboard is equipped with an 8-pin

12V connector, connect the cable with the 8-pin connector directly to the motherboard. b. If the motherboard has a 4-pin connector, divide 4-pin cable from the 8-pin connector and then connect the 4-pin cable directly to the motherboard.
2. Connect the peripheral cables, PCI-Express and SATA cables. a. Connect the peripheral cables to the power connectors of the hard drive and CD-ROM / DVD- ROM. b. Connect the SATA cables to the power connectors of the SATA hard drive. c. If necessary, connect the appropriate PCI-Express cables to the power connector on the PCI-Express graphics card. d. Connect peripheral power cables to any peripherals with a small 4-pin connector. e. Make sure all cables are securely connected.
3. Connect the AC power cable to the power supply and turn it on by turning the switch to the ON position (it is marked with an “I”).
ENVIRONMENT REQUIREMENTS
Operating temperature: +10 ° C ~ +40 ° C. Storage Temperature: -40 ° C ~ +70 ° C. Humidity (non-condensing) for operation: 20% ~ 85% relative humidity. Humidity (non-condensing) for storage: 5% ~ 95% relative humidity.
POWER SUPPLY IMPORTANT FEATURES
· Current power supply is a separate component of a personal computer. The PSU must be installed in the metal case of the system unit with sufficient electromagnetic shielding.
· The device has protection class 1, protective earth is directly connected to the metal case. When installing, make sure that the power supply is installed correctly.
· The power supply unit is intended for use in a 230 V / 50 Hz network with grounding. Minimum operating temperature +10 ° C, Maximum +40 ° C. Do not allow moisture to get on the device and do not use the device in rooms with high humidity. Do not forget that the power of the PSU decreases with increasing of temperature.
· The current loss must not exceed 3.5 mA. · During installation of the power supply, pay particular attention to ensuring effective
ventilation. Direct contact with the cooling fan is prohibited. · Do not attempt to disassemble the device yourself; there is a risk of electric shock. Inside
there are no parts that the user can repair, when parsing the PSU, you lose the warranty. Contact a service center by a specialist. · Consider the power consumption of the PC during assembly. Different configurations consume different amounts of energy. If the total power consumption exceeds the power of the PSU, then the PC will not function properly or function at all.
22

EN
WARNING!
1. The device is not intended for outdoor use. Use this PSU only in the office or at home. Please carefully read the user manual for all components of your PC before assembly.
2. Do not disassemble the device yourself under any circumstances.

POWER SUPPLY SPECIFICATION

Model Case material Form factor Certification 80+ PFC Cooling Power cord Motherboard connectors 1×24 pin, power cable length, 310 ± 10 mm

ATX 400W 0.5 SECC ATX Non Non Fan 1x 120 mm 1.2 m Normal EU power cord (non- VDE)

CPU connectors 1 4-pin, power cable length, 310 ± 10 mm
4-pin Molex, cable length, 310 ± 150 mm SATA x1 connector, cable length, 310 ± 150 mm SATA x1 connector, cable length, 310 ± 150 mm SATA x1 connector, cable length, 310 ± 150 mm Input voltage/frequency DC output
Power total for lines, W Power total, W (maximum) Turn button on/off Size WxHxD, mm

::

AC 230V/50Hz PP : :

P22

P
+3.3V +5V +12V1 +12V1 332 14A 12420A 11A 27153A PP564456333322244455

SSS4SSS4SSSSSS44AAAAAAAAAAAATTTTTTTTTTTTAAAAAAAAAAAA

: :

4566 S4SAATTAA

400

56 4SATA 6 SATA

yes

-12V +5Vsb 0.5A 2.5A
19

150 86 140

23

! 2, , , .
. .
1. , : , , , , -.*
2. . / `, .
3. , , – , .
4. , .
5. : · ; · ; · , , , , ; · , (, , .), , ( , , .); · , , ; · ; · ; · , .
6. 12 .

.
. , . __
«–» : . , 18-, , 04073, .: 0 800 300 345; (044) 230 34 84; 390 55 12 www.erc.ua/service

! 2, , , .
. .
1. , : , , , , . *
2. . / , .
3. , , – , .
4. , .
5. : · ; · ; · , , , , ; · , (, , .), , ( , , .) · , ; · ; · ; · , .
6. 12 .

.
. , . _____

WARRANTY CARD
Dear Buyer! Congratulations on your purchase of the 2E brand computer case, which was designed and manufactured in accordance with the highest quality standards, and we thank you for choosing this particular product.
We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.
1. Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: product model, date of sale, serial number, warranty service period, and the seller’s seal. *
2. The product is intended for consumer use. When using the product in commercial activities, the seller / manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.
3. Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
4. The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
5. The product is removed from warranty service in the following cases: · misuse and non-consumer use; · mechanical damage; · damage caused by the ingress of foreign objects, substances, liquids, insects; · damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.) · damage caused by non-compliance of power and cable network parameters with state standards and other similar factors; · when operating equipment in the power supply network with a missing single ground loop; · in case of violation of seals installed on the product; · lack of serial number of the device, or inability to identify it.
6. The warranty period is 12 months from the date of sale.

Tear-off maintenance tickets are provided by an authorized service center.
The completeness of the product is checked. I have read the terms of the warranty service, no complaints. Customer Signature