HYUNDAI HY-Y18 True Wireless BT Earphones User Guide

HYUNDAI HY-Y18 True Wireless BT Earphones

Product Specifications :

• Bluetooth Version: 5.4
• Effective Distance: 10m
• Horn Diameter: 13mm
• Battery Capacity: 35mAh (Earphones) / 300mAh (Charging Case)
• Music Playback Time: 5-6 hours (Earphones) / 20 hours (Charging Case) at 80% volume
• Charging Time: 1.5 hours (Earphones) / 1.5 hours (Charging Case)

Product Usage Instructions

Warnings and Precautions:

1. Do not disassemble or replace parts except as instructed.
2. Avoid contact with water or liquids as the product is not waterproof.
3. If liquid enters the product, disconnect and remove it immediately.
4. Avoid electric shock by ensuring hands are dry during installation or removal.
5. Avoid placing near heat sources or direct fire exposure.
6. Avoid strong electromagnetic environments to prevent malfunction.

Power On/Off Instructions:

1. To power on, long press the earphones touch button for 3 seconds until a white light flashes.
2. To power off, long press the earphones touch button for 5 seconds.

Pairing Instructions :

1. Method 1: Press and hold both left and right touch keys for 3 seconds to enter pairing mode.
2. Method 2: Search for Bluetooth device name “HY-Y18” on your mobile phone and click to connect.
3. Method 3: Take out the earphones from the charging case to enter pairing mode automatically.

Indicator Lights :

Earphones Light:

• White light always on when earphones are active.
• White light off when earphones are inactive.

Charging Case Light:

• RGB lights single-color cycle breathing flash during charging, sequence of red, yellow, green, cyan, blue, purple, red.
• Light goes off when fully charged.

FAQ:

• Q: How do I know if the earphones are fully charged?
  A: The earphones’ white light will turn off when fully charged. The charging case light will also be off after a full charge cycle.

• Q: What should I do if liquid enters the product?
  A: Immediately disconnect and remove the product to prevent damage. Do not use the product until it is completely dry.

HY-Y18
True Wireless Bt Earphones

Packing list

Product diagram

Tips

1. Do not attempt to disassemble or replace any parts inside the product except for method specifically indicated in the manual.
2. Do not put the product into water or any other liquid,this product is not designed to be waterproof.
3. If any liquid accidentally enters the product,please immediately disconnect and remove the product.
4. To avoid electric shock,please make sure there is no water on your hands when installing or uninstalling the product.
5. Do not place this product near a heat source or expose it directly to a fire source.
6. Do not place this product in an environment where there is a strong electromagnetic force,as this may cause the product to malfunction.

Product Specifications

• BT version：5.4
• BT effective distance： ＞10m
• Horn Diameter： Φ13mm
• Battery capacity： 35mAh（Earphones）/300mAh（Charging Case）
• Music playback time（80% volume）:5-6H（Earphones）/20H（Charging Case）
• Charging time： 1.5H（Earphones）/1.5H（Charging Case）

Charging indication

1. Before charging，Please turn off the earphones first
2. Plug the USB end into the DC5V charger socket，connect the Type-C end to the earphones charging port，RGB lights single-color cycle breathing flash (red yellow green cyan blue purple and red sequential breathing flash for a cycle)，Blue light stays on for a long time when fully charged and goes off immediately when the charging cable is unplugged
3. Low battery alert for earphones voltage below 3.3V“，Battery Low ”reminder every minute.
4. Auto power off when the battery level is lower than 3.1V

Product Operating Instructions

Power on

1. When the earphones is in power off, long press the earphones to touch the button for 3 seconds, flash after the white light is on for 1 second
2. When the earphones is in the charging case，take out the earphones from the charging case，automatically boot the earphones

Power off

1. When the earphones is powered on，long press the earphones touch button for 5S and earphones power off
2. Put the earphones in the charging case and automatically power off

Pairings

• Method 1: When the earphones is off, press and hold the left and right touch key buttons for 3 seconds to turn on, the earphones automatically enters the pairing state
• Method 2: Open the mobile phone to search the bluetooth device name, click the device name ” HY-Y18″, completing the connection
• Method 3: Take out the earphones from the charging case, enter the pairing state  automatically, open your mobile phone to search for bluetooth equipment name click on the device name link to complete the link

Status of the earphones LEDs

intervals)

Charge Indicator Status

Charging case Discharge| Earphones charging| Earphones light: Earphone’s white light is always on 2.Charging case light display: RGB lights single-color cycle breathing flash (red yellow green cyan blue purple and red sequential breathing flash for a cycle) , two cycles after the extinction / fully charged after the extinction
---|---|---
Earphones fully charged|

1. Earphones light: Earphones white light off
2. Charging case light display: RGB lights single-color cycle breathing flash (red yellow green cyan blue purple and red sequential breathing flash for a cycle) , off when fully charged

Charging the charging case| Charging| RGB lights single-color cycle breathing flash (red yellow green cyan blue purple and red sequential breathing flash for a cycle)
The case is fully charged| Blue light stays on for a long time and goes off immediately when the charging case is unplugged.

Voice prompt

Function Operation

Conventional mode

Music mode

Call mode

Clear pairing records
When the earphones is in unconnected, 5 click the left or right earphones to touch the button, power off after 5 times of white light flashing，after reopening，automatic pairing left and right earphones

Names and contents of hazardous substances in products

• This table is prepared according to the provisions of SJ/T11364
• : means that the content of harmful substances in all homogeneous materials of the part is below the limit requirement of GB/T26572.
• X: indicates that the content of the hazardous substance in at least one homogeneous material of the part exceeds the limit specified in GB26572. The parts marked with “X” in the table are all unable to achieve the substitution of harmful substances due to the limitation of the global technology development level.
• This table is prepared in accordance with the provisions of SJ/T11364 Printed circuit board components*: including printed circuit boards and their parts, electronic components, etc.; Depending on the product model, the product you purchase may not contain all of the above components.
• Electrical and electronic products sold in the People’s Republic of China must be marked with this logo, the number within the logo represents the product’s environmental life under normal conditions of use.

Warranty Statement

Disclaimer
This user manual does not have any form of guarantee position expression or other implication.The mentioned products, specifications and information are for reference only,and the content will also be updated on the web at any time without additional separate notice

Warranty statement:
The product attached to this document is guaranteed as follows: If the product is twelve (12) months from the date of purchase(“Warranty Period”), under normal conditions of use due to quality defects damaged,can be repaired. Free repair and free replacement if the manufacturer confirms that it cannot be repaired: repaired or replaced product. Continue to enjoy the warranty during there maining warranty period (the shortest not less than 30 days).Purchased by sale ticket date shall prevail if the purchase date cannot be determined, the warranty period shall be 13(13) months if you apply for a warranty,please call the product service hotline first and execute it in the manner instructed by us.When applying for warranty, you need!to provide an accurate,complete and clearly filled out valid sales invoice. The above guarantee does not apply to the following situations:

1. Exceeding the validity period of the three packs;
2. Altering the warranty card and product code does not match the product body:
3. Causes caused by misuse abuse or improper transportation, use, maintenance olstorage obstacles or damage;
4. Failure or damage caused by force majeure (such as earthquake,war,disaster,etc.) or accident pad:
5. The zipper and tower buckle are damaged due to excessive force:
6. Disconnection or tearing caused by excessive load
7. Any damage caused by sharp objects;
8. Products with signs of burning of flooding;
9. Damage caused by unauthorized disassembly;
10. Aging, discoloration, abrasion,rupture and other losses that occur during the normal use of the product.
11. If the original identification label of the product is changed or damaged, this guarantee will become invalid.

The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should check on the spot and raise objections to any discrepancies. The above guarantees are all guarantees we make regarding the products, and are only applicable in mainland China. Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.

Service supervision hotline: 400-885-8808

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenc e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>