Linkface DBPE-23 Pet Health PE DearBuds Owner’s Manual
- July 25, 2024
- Linkface
Table of Contents
Linkface DBPE-23 Pet Health PE DearBuds
Specifications
- Weight DearBuds PE (50g), Charging Cradle (65g)
- LED Red LED, IR LED
- Heat Max 38°C
- Air Delivery Max 3L/min
- Connectivity Wireless 2.4GHz
- Sensors High performance humidity sensor,
- 3 embedded temperature sensors
- Battery Max 60 times in low power mode(L1), 2 hours for a full charge.
- Company Name: Linkface Co., Ltd.
- Model: DearBuds PE
- Model No.: DBPE-23
- Manufacture: Linkface Co., Ltd. / Republic of Korea
- Website: www.linkface.co
Product Usage Instructions
How to use DearBuds PE
DearBuds PE is a standalone device. You may download mobile apps if you wish
to access additional functions.
How to install mobile apps
Search for ‘DearBuds Connect’ in the Apple App Store Google Play Store and
install it.
How to connect
After powering on, launch the DearBuds Connect app once the Bluetooth icon
blinks. When the connection is successful, the Bluetooth icon blinks first and
stays on. If the connection fails, p ress the rescan button(+) to retry the
connection)
Key Functions of Control Buttons
| Main button| Function| Button|
---|---|---|---|---
| | Power On| Double press
Power Off| Long press ( 2 seconds)
Mode Change (Auto, L1, L2, L3)| Press once
Start dehum modification| Quick double press
| | |
Sub button| Function| Button|
---|---|---|---
| Changing temperature unit. (°F / °C)| Double press|
Changing brightness (L1, L2, L3)| Press once|
Reset (Factory reset)| Long press (10 seconds)|
|
Installation of Mobile Apps:
Search for ‘Dear Buds Connect’ in the Apple App Store / Google Play Store and
install it.
Description
- Charging iconicon*blinks when it needs charging
- red when charging
- green when fully charged.
- Bluetooth iconiconblinks while connecting with the app light stays on once connecting is
- Dehumidification iconicon*shows up during dehumidification.
- “%” icon : percentage of humidity/battery (When % is not on display, it shows a temperature.)
- Status icon
- “Dehumidification” blinks
- “Temperature Measurement” blinks
- “Too humid” blinks
- When “Dehumidification” is completed, blinks
Connection:
- Power on the device.
- Launch the Dear Buds Connect app once the Bluetooth icon blinks.
- If the connection fails, press the rescan button(+) to retry the connection.
Key Functions of Control Buttons:
| Main button | Sub button |
|---|---|
| Double press – Power On | Double press – Start dehumidification |
| Long press (2 seconds) – Power Off | Double press – Changing brightness |
| Press once – Mode Change (Auto, L1, L2, L3) | Long press (10 seconds) – Reset |
(Factory reset)
Modes and Running Time:
| Mode | Settings | Running Time |
|---|---|---|
| Auto (Automotive mode) | When the ear humidity reaches the optimal level, the | |
| device automatic all y turns off. | Min – 30 s ec ponds Max – 3 minutes | |
| L1 (Soft mode) | For pets with sensitive hearing | 3 minutes |
| L2 ( Norm al m ode) | After physical activity or showering | 3 minutes |
| S (Standby mode) | Only measurement, no ventilation | 3 minutes |
※ Air ventilation power is higher with the strength of the mode.
FCC Instructions
- FCC ID: 2A9UW-DBPE-23
FCC Compliance Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Got a question
We are here to help you out. cs@linkface.co
Online Manual
For more detailed instructions and FAQs, please check the online manual.
FAQ
Q: How do I know when the device needs charging?
A: The charging icon blinks when it needs charging.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>