ecoer EST01 Wi-Fi Programmable Thermostat User Guide

ecoer EST01 Wi-Fi Programmable Thermostat User Guide

Features

• Compatible with most 24V controlled heating, cooling, and heat pump systems

• Set your temperature remotely from your smart phone

• Wi-Fi connectivity through App

• 4.3” touch screen LCM display

• Quick connecting terminals to save installer’s time

• Be able to control fan speed of E Series Air Handler for better
  dehumidification control

• 3-year limited warranty

Caution
ELECTRICAL HAZARD
Can cause electrical shock or equipment damage. Disconnect power before beginning installation.

EQUIPMENT DAMAGE HAZARD
Compressor protection is bypassed for Ecoer condensing units. To prevent equipment damage, set compressor protection accordingly for other brand condensing units.

MERCURY NOTICE
If this product is replacing a control that contains mercury in a sealed tube, do not place the old control in the trash. Contact your local waste management authority for instructions regarding recycling and proper disposal.
REQUIRED: 24 VAC POWER (“C” WIRE)

1. Introduction

Parts in the packaging box

Thermostat Layout

Mode: Select system mode OFF, COOL, AUTO, HEAT and EM HEAT.
Fan: AUTO Runs based on working condition of the compressor. ON: Keeps running all the time. CIRC: Circulate the air of indoor periodically when AC/HP stops.
Adjust temperature: Touch + or ­ icon to set your desired temperature.
Menu (Back Button): Time setting, working mode, Wi-Fi, Schedule and other settings.

2. Install your Thermostat

Power off the system before remove your old thermostat.
Look at the wires going out of the wall and take a photo for reference. Label each wire going into your old thermostat with the provided stickers.

The EST01 Wi-Fi thermostat

• Does not work for 120-240V systems.
• Does not work with millivolt systems.
• Required 24 VAC power supply (“C” wire)
• Does not need jumpers because RC and RH are connected already.
• Does not support universal input (S terminals) for indoor and outdoor sensors.
• Does not support universal relay (U terminals) for ventilation.

Wiring Terminals in Mounting System

3. Setup

3.1 Time Setting

1. Press Menu at homepage, the screen will display DATE TIME.
2. Press Edit, the screen displays SETUP YEAR, press + or – to change.
3. Press Next to SETUP MONTH / DATE / HOUR / MINUTE, respectively.
4. Press Done to save time setting.
   NOTE: Press Menu during setting will exit you directly and nothing will be saved.

3.2 Working Mode

HOLD: Keeps the desired temperature set all the time.

SCHEDULE: Follows 7-day plan (4 time periods per day) To activate the scheduling, it’s required to choose AUTO at thermostat homepage or on Ecoer Home App control interface.

Activate 7-day Scheduling by Ecoer Home App

• Select Mode to Auto
• Turn ON Schedule (i.e. Choose `Follow Schedule’)

3.3 Setup Wi-Fi

Search `Ecoer Home’ on Google Play or App Store to install the App. Register with your phone number or email, log in App to add device.

Add device on `Ecoer Home’ App

• Press + icon (see Fig.1) on the upper-right corner of the App.
• Touch “Confirm signal icon is blinking” (see Fig.2)
• Connect your smart phone to Wi-Fi (Select 2.4 GHz Wi-Fi and input password), it takes 30 to 60 seconds to complete (see Fig.3). Touch “Help” to trouble shoot if you fail to make it online.

• The design of Ecoer Home App may subject to change.

`Ecoer Home’ App Control Interface

• The design of Ecoer Home App may subject to change.
  Manufacturer reserves the right to change specifications or designs without notice.

3.4 SCHEDULE SET

NOTE: Press Menu during setting will exit you directly and nothing will be saved.

Detailed Schedule Setting at thermostat

1. Press + or – to choose the group or the day of week.
   If the schedules are the same on different days, it will be more convenient to set it by group.

2. Press Next to set from the first period 06:00 of the selected day, press + or – to adjust time (15 minutes per interval).
   a) Press Next to set desired COOL temperature by press + or – icon.
   b) Press Next to set desired HEAT temperature by press + or – icon.

3. Press Next to set schedule for other period of the selected day.

4. Continue to set schedule for other day of the week.

5. Press Done to save.

Detailed Schedule Setting via `Ecoer Home’ App

1. Click to enter scheduling.
2. Click the period you want to set, then scroll start Time, Cool Temp. and Heat Temp.
3. Touch “COMPLETE” to save your settings.

3.5 USER SETUP

FAN CIRC Setting by Ecoer Home App

NOTE: App can set FAN CIRC when Mode is Off (i.e. AC/HP stops). Circulate indoor air when Air Conditioner or Heat Pump stops for a long period.

3.6 FACTORY SET (Professional only)

NOTE: Press Menu during setting will exit you directly and nothing will be saved.

System Types List

Remarks:
ESI- Ecoer Smart Inverter condensing unit * means optional connection

3.7 Clean Screen

1. Press Menu at homepage, the screen will display DATE TIME, then press Next until you see CLEAN SCREEN.
2. Press Done to allow the user to clean screen for 30 seconds without changing any settings.

3.8 Reset

1. Press Menu at homepage, the screen will display DATE TIME, then press Next until you see RESET, press Done to enter.
2. Press + or – to ON, then press Done. The thermostat will be reset to factory default settings.

4. Warranty

Ecoer warrants this product, against failure due to defect in materials or workmanship under normal use and maintenance, for a period of three (3) years. All warranty periods begin on the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Ecoer shall repair or replace it (at Ecoer’s option).

Call Ecoer Support Hotline at 855-598-4093 or email support@ecoer.com if the product is defective. They will be able to make the determination whether the product should be brought back to the distributor you purchased from. If deemed a warranty claim, distributor/dealer should log onto Ecoer’s website www.ecoer.com and select File Claim in the Portal. Fill out required information and follow the prompts to submit.

This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Ecoer that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer.

5. Regulatory information

FCC Certificate No.: GTI20191265C This device conforms FCC Rules and Regulations under Part 15 Subpart B requirements. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

FCC Warning (USA only) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

©2022 ECOER INC. 43671 Trade Center Place, Suite 100 Dulles, VA 20166 Tel: 703-348-2538 www.ecoer.com
Manufacturer reserves the right to change specifications or designs without notice.

References

• Home - Ecoer HVAC Heating And Cooling Smart Equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>