SABRENT v2 Docking Station With 8K Display Output And 60W Charging User Manual

v2 Docking Station With 8K Display Output And 60W Charging
User Manual

FEATURES

• Thunderbolt 4 TM (TB4) dockng station with up to 40Gbps transfer speeds, compatible with USB4 and backward ompatible with Thunderbolt 3™
• Aluminum construction for an enhanced look and feel, improved durability, and superior heat dissipation, securable via a Kensington security slot
•  Single display output up to 8K@30Hz (DSC) over DP 1.4 and HDMI 2.1 ports and display output up to 8K@60Hz/4K@144Hz (DSC) over a daisy-chainable TB4 port, with HOR+ HDCP2.3 support
• Triple display output up to 4K@60Hz with DP + HDMI + TB4 on Windows and dual display output support up to 4K@60Hz using HDMI/DP + TB4 on macOS and Linux systems (verify Apple silicon chip compatibility)
• Provides two USB-C 1 OGbps (USB 3.2 Gen 2×1) ports, one up to 1 BW (9V/2A) and one 15W (5V/3A), for fast and power-hungry devices like external storage and smartphones, plus three 7.5W (5V/1.5A) USB-A ports, one 10Gbps (USB 3.2 Gen 2×1) and two 5Gbps (USB 3.2 Gen 1×1), for keyboards, mice, and other peripherals
• Supplies up to 60W of charging for the connected laptop or device
• UHS-11 memory card reader slots for microSD and SD (4.0) memory cards with transfer speeds up to 312MBps
• Gigabit Ethernet (1 GbE) 10/100/1000 RJ45 Ethernet port for fast Internet and network connectivity
• Single 3.5mm audio ack for audio nput or stereo output

SUPPORTED OPERATING SYSTEMS

• Windows
• macOS, PadOS
• Linux, ChromeOS

PACKAGE CONTENTS

• Thunderbolt 4 TM Docking Station
• Power adapter (24V/6.25A, 150W)
• Thunderbolt 4 TM cable (70cm)
• User manual

Back:

1. DC Jack (20V/7.5A, 150W)

2. Gigabit Ethernet (1GbE) RJ45 Port

3. USB-A 5Gbps Port with 7.5W (5V/1.5A) PD

4. USB-A 5Gbps Port with 7.5W (5V/1.5A) PD

5. HDMI 2.1 Display Port

6. DisplayPort 1.4 (DP1.4) Port

7. 40Gbps Thunderbolt 4 Downstream Port

8. 40Gbps Thunderbolt 4 Upstream Port
   Front:

9. USB-C 10Gbps Port with 18W (9V/2A) PD

10. USB-C 10Gbps Port with 15W (5V/3A) PD

11. USB-A 10Gbps Port with 7.5W (5V/1.5A) PD

12. 3.5mm Audio In/Out Port

13. UHS-II microSD (4.0) Card Reader Slot

14. UHS-II SD (4.0) Card Reader Slot
    Side:

15. Kensington Security Slot

Geting Started

Connect external displays through the HDMI, DisplayPort (DP), and/or Thunderbolt 4 (TB) ports. Connect an appropriate network/Ethernet cable into the RJ45 port for network and Internet access. Insert any microSD and/or SD memory cards into the memory card slot(s) and connect any USB peripherals for use or for charging.
NOTES

• Display output is dependent on the host device hardware.
• This product is designed for Thunderbolt 4 devices. MST must be supported by the device and operating system for dual/triple display output. Triple output for Windows devices only.
• Compatible Mac and Linux devices must use the TB4 port as part of the display output pair for dual display.
• Apple silicon M1 and M2 chips only support a single external display.

FREQUENTLY ASKED QUESTIONS

a. Can I extend to two additional, external displays?

A: Yes, but the host device must support MST and one of the display output ports must be the Thunderbolt 4 TM port for compatible Mac and Linux systems. You can add up to three displays with a compliant Windows system.

Q: I have a Mac with an Apple silicon M1 or M2 chip and can only get a single external display to work. Is this expected?

A: Yes, it's expected. Apple computers with M1 and M2 chips only support a single external display due to their nherent hardware design limitations. Dual display output s not supported on these specific models.

Q: My Thunderbolt 4 TM Docking Station s not being recognized by my laptop. What should I do?

A: Update any drivers and firmware for Thunderbolt on your system, f applicable. Ensure that the power supply s connected and the docking station is powered on. Also, make sure the Thunderbolt cable is securely connected at both ends, to the docking station and to your system. If problems remain, try testing with a different Thunderbolt cable and/or a different Thunderbolt port on the host system.

Q: I'm experiencing video display issues when using the docking station. What can I do to troubleshoot this?

A: Update your graphics drivers to the latest version, if applicable. Next, ensure that your display cable (HDMI, DisplayPort, TB4) is properly connected and securely plugged nto both the docking station and the display. Verify that the monitor and the laptop support the chosen resolution and refresh rate. If problems remain, please test with a different monitor, display cable, and/or adapter to rule out hardware ssues.

Q: The USB devices connected to the docking station are not working as expected. What should I check?

A: Check f the USB devices require additional dr vers or software to function and install them if necessary. Also, verify that the USB and system drivers are up to date. Next, ensure that the USB devices are properly and securely connected to the docking station's USB ports. Also, check f the USB ports on the docking station are working by testing with different USB devices and, if possible, a different host system.

Q: How can I verify if the Thunderbolt 4 TM connection is operating at its maximum speed?

A: Right-click on the Thunderbolt icon in the system tray (Windows) or go to System Preferences > Thunderbolt (macOS). Next, look for the Thunderbolt connection details, which should indicate the current link speed (for example, 40Gbps). If the link speed s ower than expected, ensure that you are using a Thunderbolt 4 cable and that your device supports Thunderbolt 4 TM.

FOR HELP, COMMENTS, QUESTIONS OR CONCERNS
PLEASE CONTACT OUR TECH SUPPORT TEAM VIA OUR
WEBSITE WWW.SABRENT.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>