INFINITY EvolutionMax Evolution Max 4D Massage Chair User Guide
- August 30, 2024
- Infinity
Table of Contents
Evolution Max 4D
Massage Chair
Assembly Guide
EvolutionMax Evolution Max 4D Massage Chair
Before assembling your chair, watch an assembly video at:
www.infinitymassagechairs.com/assembly-
tutorials
Alternatively, scan the QR code to go directly to the URL above.
Step 1:
Prior to assembly, carefully unpack all box contents. Check box contents to
the detail below. Make sure all contents are accounted for.
If anything is missing, please contact INFINITY at
603-910-5000. Do not return to the
place of purchase. Step 2:
Place the chair body on a soft surface for assembly. Determine the left arm
panel from the right and place next to the correct side of the chair. Step
3:
Note the 3 locations each arm attaches to the chair body; locations A, B and C
Step 4:
Locate the Air Hoses off each side of chair body and note each hose has a
number. Locate the corresponding number on the Air Ports of each Arm.
Firmly connect the hoses to the ports by matching the numbers of each. Locate
the electrical plug off the left side of the chair body. Firmly clip into the
corresponding electrical port on the left arm panel.
Final Check: Review chair for smooth operation. If things are not
operating correctly, review all assembly steps. Call Infinity support at
1-603-910-5000 if you need live US-
based support.
If you wish to use an APP to control the chair, download from the Apple or
Google app store and follow pairing instruction found within the APP.
You are done; time for a Massage!
Step 5:
Carefully lift each arm and hook on the rail to support the arm.
Make sure the air hoses and electrical wires remain connected and not pinched.
Step 6:
Next locate the Pin in position A on the Arm and secure it under the Pin
Retainer on the Chair body in position A from step 3. Step 7:
Locate the long, silver M8 Bolts (2), Washers (2) and hex key tool from the
Accessory Box. Fasten this bolt and washer under the Velcro flap just below
the shoulder air bag (Position B) until snug; do not tighten yet. Step 8:
Locate the shorter, black M8 Bolts (2) and Washers (2) from the Accessory Box.
Fasten this bolt and washer in Position C. When secured, tighten both
positions C and B on both arms. Step 9:
Locate the Power Cord, Remote Control and Remote pouch from the Accessory Box.
Attach each to the chair body in locations on the illustra- tion, being
careful to line up electrical pins and prongs. The Pouch attaches to the
Velcro found under the right arm
massage. Step 10:
Plug the chair into a grounded electrical outlet. Power on the Main power
switch and press the Power button on the remote until the chair uprights out
of shipping position. (you may need to press power more than once). Step
11:
Unplug chair from electrical source. Locate Footrest and place on floor
adjacent to chair body. Attach the 3 electrical connectors and air hose to air
port. Step 12:
Remove the clips on the Chair Body Pins by sliding up. (If Clips are missing,
there are spare clips in the Accessory Box)
Lift the Footrest and position the hinge of on body pin. Carefully align the
other side hinge over the pin and center the Footrest. Fasten the clips over
the pins to retain both sides of the footrest.
Register your product at
www.infinitymassagechairs.com/
warranty to ensure it is in our system. This will simplify the warranty
process should you ever need it.
Alternatively, scan the QR code to go directly to the URL above.
72 Stard Road, Seabrook, NH 03874 |
603-910-5000 |
www.infinitymassagechairs.com
Version 1.1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>