SEALEY MS0815 Helmet Glove Boot Dryer Instruction Manual

: August 24, 2024
: SEALEY

Table of Contents

SEALEY MS0815 Helmet Glove Boot Dryer
Product Information
Product Usage Instructions
SAFETY
INTRODUCTION
SPECIFICATION
OPERATION
FAQ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEALEY MS0815 Helmet Glove Boot Dryer

Product Information

Specifications

Model Number: MS0815
Input: Mains adaptor: 12V (dc) 3A, USB adaptor: 5V (dc 2A) 3-pin Transformer
Plug Type: 3-pin Transformer

Product Usage Instructions

Safety
Electrical Safety for Use of Transformer:

Use only the supplied transformer or supplied 12V 1A USB cable for connecting the dryer stand assembly to the main power supply.
Do not turn the product on at the mains until the fan’s jack plug has been inserted into the dryer stand assembly.
Ensure the risk of electric shock is minimized by the installation of appropriate safety devices e.g. RCD.
If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT tested.
Inspect the transformer plug, cable, and connections for wear and damage before connecting them to the main power supply. Do not use if worn or damaged.
Do not overload the dryer stand or use it for purposes other than its designed function.
Do not locate in a position where items could fall from the dryer stand assembly due to accidental contact.

Operation
The dryer stand assembly is designed for drying helmets, gloves, and boots. Follow these steps for operation:

Connect the supplied transformer or USB cable to the mains power supply.
Insert the fan’s jack plug into the dryer stand assembly.
Follow the diagrams provided in the instruction manual for correct assembly and positioning of components.
Ensure the dryer stand is placed indoors and kept away from wet or damp conditions.
When not in use, disconnect the transformer or USB cable from the power supply.

Environment Protection
Recycle unwanted materials instead of disposing of them as waste. Dispose of the product at the end of its working life in compliance with local regulations. Contact your local solid waste authority for recycling information.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT : PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

ELECTRICAL SAFETY FOR USE OF TRANSFORMER

Use only the supplied transformer or supplied 12V 1A USB cable for connecting the dryer stand assembly to the mains power supply. Failure to observe this warning could result in injury and or fire. The use of any other type of charger will invalidate the warranty.
DO NOT turn product on at the mains until the fan’s jack plug has been inserted into the dryer stand assembly.
WARNING! It is the user’s responsibility to read, understand and comply with the following instructions.
WARNING! You must ensure the risk of electric shock is minimised by the installation of appropriate safety devices e.g. RCD.
NOTE: If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable Appliance Test) tested.
Ensure that you inspect the transformer plug, cable and connections for wear and damage to ensure items are safe before connecting them to the mains power supply. If worn or damaged DO NOT use.
WARNING! There are no user serviceable components in the transformer. DO NOT dismantle.
WARNING! For indoor use only. DO NOT allow the transformer to become wet. DO NOT use in wet or damp conditions.
DO NOT pull the transformer from the mains socket by the lead.
DO NOT overload this dryer stand; it should only be used for the designed purpose.
DO NOT locate in a position where items could fall from the dryer stand assembly owing to accidental contact.

INTRODUCTION

An integral, quiet running fan will quickly and conveniently dry and cool your helmet, boots or gloves whilst on the base. Inhibiting the build-up of damp and odour. Helps prevent the build up of bacteria so your helmet, gloves and boots smell fresher. Improves the life span of the linings and impact materials in your equipment. The unit comes is supplied with a USB adapter for connection to your vehicle or to a portable power pack. Making it also ideal for race/track days, as well as a mains adaptor for using at home after your ride out/commute . Made from a firm protective PU foam to best protect your equipment.

SPECIFICATION

Model No : MS0815
Input : Mains adaptor:12V (dc) 3A.
USB adaptor: 5V (dc 2A)
Plug Type: 3-pin Transformer

OPERATION

See the next page for Instructions and diagrams

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

REGISTER YOUR PURCHASE HERE

WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

Note : It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important : No Liability is accepted for incorrect use of this product.
Warranty : Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

FAQ

Q: Can I use a different charger with the dryer stand?
A: No, only use the supplied transformer or USB cable to connect to the mains power supply. The use of any other charger will invalidate the warranty.

Q: Where should I place the dryer stand?
A: Place the dryer stand indoors and in a location where items cannot fall off due to accidental contact.