SEALEY VS7105 5PC Engine Oil Funnel Set Instruction Manual

SEALEY VS7105 5PC Engine Oil Funnel Set Instruction Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

• Refer to instructions

• Refer to instructions

• Wear protective gloves

• Wear safety footwear

• Wear protective clothing

SAFETY

• WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.
• DO NOT use tools if damaged.
• Maintain tools in a good, clean condition for best and safest performance.
• Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist.
• Wear suitable clothing to avoid snagging. DO NOT wear jewellery and tie back long hair.
• Keep children and unauthorised persons away from the work area.
• When not in use, store in a secure, childproof location.
• Keep working area clean and tidy, dry and free from unrelated materials
• Ensure the working area has adequate lighting

INTRODUCTION

Fastens and seals into the engine filler with three manufacturer specific adaptors. Covering a large proportion of modern vehicles for Audi, Seat, Skoda and Volkswagen. Hands-free operation with no mess or spills.  Seeinstructions on Sealey website for complete list of vehicle applications.

SPECIFICATION

Adaptors:1 x 39mm Knob Type, 1 x Clip Type – 38mm, 1 x Ø45mm – Twist fitting

NOTE: Clip Type is a common type and details are therefore not included in the table below.

OPERATION

ASSEMBLY

Apply adhesive (not supplied) around the fine threads on the transparent chamber (fig.1)

Connect transparent chamber to the upper funnel part (fig.1) to form complete funnel.

IN USE

NOTE: Ensure engine is cool before using funnel

Rmove original oil cap on engine

Connect oil funnel or funnel with relevant adapter to oil filler neck

Make sure the funnel is securely connected to the engine before filling.

Disconnect oil funnel from oil filler neck after oil is refilled.

Clean residual oil inside the funnel and store the funnel in dry and well- entilated place

Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk

References

• Sealey - Leading Professional Tool & Workshop Equipment Supplier

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>