HORNBACH 10090350 Ceiling Spot Luminaire Instruction Manual
- August 24, 2024
- HORNBACH
Table of Contents
HORNBACH 10090350 Ceiling Spot Luminaire
Specifications:
- Nominal Voltage: 220-240 V~, 50 Hz
- Nominal Power: 1x / 2x / 3x max. 40 W
- Protection Class: I
- Protection Rating: IP 20
- Weights:
- 10090350: 350 g
- 10090371: 600 g
- 10090372: 1050 g
- Dimensions:
- 10090350: 100 x 100 x 135 mm
- 10090371: 250 x 70 x 135 mm
- 10090372: 440 x 70 x 135 mm
Product Description
The ceiling spot luminaire is designed for indoor use only. It features a rotatable light fixture with a glass lampshade. The user can replace the light source.
Installation Instructions:
- Ensure the luminaire is not used outdoors or in damp environments.
- Connect the luminaire to the power supply following the connection instructions.
- Securely attach the luminaire to the ceiling mount using the provided screws.
- If applicable, assemble the lampshade as shown in the provided diagram.
- Turn on the power supply to test the luminaire.
Maintenance and Care:
- Regularly clean the luminaire with a soft, dry cloth to remove dust.
- Avoid using harsh chemicals or abrasive materials for cleaning.
- If any components need replacement, ensure to use compatible parts.
FAQ:
Q: Can the light source be replaced by the user?
A: Yes, the light source is designed to be replaceable by the end user.
Q: Is the luminaire suitable for outdoor use?
A: No, the luminaire should only be used indoors and not in damp
environments.
Description
- 2 x Fastening screws
- Ceiling mount
- Rotatable luminaire
- Glass lampshade
- Light bulb (E14, not included)
- Power supply terminal
- Tool
- Sealing ring(s)
- Light shade fastening ring(s)
- Screws / plugs
Assembly
Caution: First disconnect the power supply for this connection.
-
Unscrew the fastening screws and remove the ceiling mount.
-
Select an installation location without pipes or cables behind it. Mark the fastening holes and drill the holes.
-
Fix the ceiling mount in place using plugs and screws. Connect the luminaire to the power supply (see section III). Attach the luminaire to the ceiling mount and fix it with the fastening screws.
Caution: Make sure the screws and plugs are suitable for the ceiling material. -
Assemble the light shade, as shown in figure 4.
-
Insert the light bulb (not included) and fix in place by rotating clockwise.
-
Connect the power supply.
Connection
Connect the luminaire to the power supply (see figure). Make sure that the connections are tight and that no loose cable endings emerge from the terminal. The luminaire needs to be earthed.
- N: Blue
- :Yellow/Green
- L: Brown
Maintenance and care
Caution: Switch off the luminaire and wait for the light bulb to completely cool down.
Cleaning
Wipe the luminaire with a soft, dry cloth. Never use scouring powders or
chemical cleaning agents. Never allow the electrical components to become damp
for risk of electric shock or irrevocable damage to the luminaire.
Please read these instructions carefully and keep them safe for later use!
Safety information
- Electrical work and repairs must be performed by a qualified electrician.
- During installation, always observe the national installation regulations.
- The luminaire must not be modified in any way. Risk of electric shock and accident.
Used symbols
Caution: Risk to health and the product.
Do not use outdoors or in damp environments.
Protection class I appliance.
Must be connected to a protective ground.
Light source replaceable by enduser.
Technical data
- Nominal voltage: 220-240 V~, 50 Hz
- Rated power: 1x / 2x / 3x max. 40 W
- Protection class: I /
- Degree of protection: IP 20
Weight:
- 10090350:350 g
- 10090371:600 g
- 10090372:1050 g
Size
- 10090350:100 x 100 x 135 mm
- 10090371:250 x 70 x 135 mm
- 10090372:440 x 70 x 135 mm
Waste disposal
The crossed-out wheeled bin symbol requires separate disposal for waste electrical and electronic equipment (WEEE). Such equipment may contain valuable, but dangerous and hazardous substances. You are required by law to return these products to a designated collection point for the recycling of WEEE and must not under any circumstances dispose of them as unsorted municipal waste. In this way,you can help to conserve resources and protect the environment.
In Germany, HORNBACH is obliged:
- to take back old appliances of the same type free of charge in HORNBACH stores when you purchase a new electrical or electronic appliance.
- to take back up to 3 WEEE of the same type (up to max. 25 cm edge length free of charge in HORNBACH stores, even if you do not purchase a new appliance.
- when delivering a new electrical or electronic appliance to a private household, to collect an old appliance of the same type free of charge or to enable you to return it in your immediate vicinity.
Make sure that lamps which can be removed from the appliance without destroying it have been removed from the appliance before disposing of it. For further details, please consult www.hornbach.com or your local authorities.Children must not play with plastic bags and packaging material, due to the risk of injury and suffocation. Store such material safely or dispose of it in an environmentally friendly way.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>