HORNBACH 10533560 2000 Watts Oil Free Radiator User Manual

: June 4, 2024
: HORNBACH

Table of Contents

HORNBACH 10533560 2000 Watts Oil Free Radiator
Introduction
Specifications
Description
Set-up and operation
Safety features
Cleaning and Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HORNBACH 10533560 2000 Watts Oil Free Radiator

HORNBACH 10533560 2000
Watts Oil Free Radiator PRODUCT-IMG

Thank you for choosing this Hornbach device. You have purchased a quality device that you will enjoy for many years. Using this device with respect and care will reduce the risk of personal injury or material damage.

Information requirment for the electric local space heaters

Nominal heat output

|

Pnom

|

2,0

|

kW

|

manual heat charge control, w ith integrated thermostat

|

No

Minimum heat output (indicative)

|

Pmin

|

1,0

|

kW

|

manual heat charge control w ith room and/or outdoor temperature feedback

|

No

Maximum continuous heat output

|

Pmax,c

|

2,0

|

kW

| electronic heat charge control w ith room and/or outdoor temperature

feedback

|

No

Auxiliary electricity consumption

|

fan assisted heat output

|

No

At nominal heat output

|

elmax

|

0,000

|

kW

| Type of heat output/room temperature control (select one)

At minimum heat output

|

elmin

|

0,000

|

kW

| single stage heat output and no room temperature control|

No

In standby mode| elSB| N/A| kW| Tw o or more manual stages, no room

temperature control

| No
| | | | w ith mechanic thermostat room temperature control|

Yes

| | | | w ith electronic room temperature control|

No

| | | | electronic room temperature control

plus day timer

| No
| | | | electronic room temperature control plus w eek timer|

No

| | | | Other control options (multiple selections possible)
| | | | room temperature control, w ith presence detection|

No

| | | | room temperature control, w ith open

w indow detection

CAUTION
Read the user instructions carefully and completely before using (and installing) this device

Introduction

This manual describes the correct and safe use of this device. Keep this manual for future reference. The manual is an essential part of the device and must be given to the new owner upon resale or exchange. This manual has been compiled with the utmost care. Nevertheless, we reserve the right to improve and adjust this manual at any time. The images used may differ.
The following symbols and terms are used in this manual to alert the reader on safety issues and important information:

WARNING
Indicates a hazardous situation that, if the safety instructions are not followed, can lead to injuries to the operator or bystanders, and light and/or moderate damage to the product or to the environment.

CAUTION
Indicates a hazardous situation that, if the safety instructions are not followed, can lead to light and/or moderate damage to the product or to the environment.

CAUTION
In order to avoid overheating, do not cover the heater.

Identification

Specifications

Product size:	44 x 25 x 63.5 cm
Weight:	5.6 kg
Voltage:	230 V ~ 50-60 Hz
Power (L/M/H):	1000/2000 W
Protective class:	Class I

Description
The Ölfreier Radiator 2000 Watt is an easy-to-use electric heater for indoor domestic use.

Warnings

Safety warning – general

Read the user instructions carefully and completely before using (and installing) this device. Keep the instruction leaflet somewhere safe so that you can consult it and pass it on in the future.
Before use, check your new device (including cable and plug) for any visible damage. Never use a damaged device but take it back to the supplier for a replacement.
In the event of incorrect usage or installation, there is a risk of electric shocks and/or a fire hazard.

Warnings – device position

Do not place the device near, under, or facing an electrical socket and not in the vicinity of an open fire or heat source.
To reduce the risk of fire keep textiles, curtains, or any other flammable material a minimum distance of 1 meter from the air outlet.
Do not use the heater outdoors or in areas that are smaller than 20m³.
The device contains hot and/or glowing and sparking components. Do not, therefore, use where fuels, paint, flammable fluids and/or gases are stored. Do not use the device in an environment that poses a fire risk, e.g. near gas tanks, gas pipes or aerosols. This is an explosion and fire risk!
This device is not suitable for wall or ceiling installation.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
This device is splash-proof but even though it is a mobile device, it is not suitable for use in bathrooms or near a swimming pool. Do not place the device near water-points and/or water reservoirs. Make sure that the device cannot fall into water and that it cannot be penetrated by water. If the device does get wet make sure you remove the plug from the socket! Do not use a device that is wet inside but take it to be repaired. Never immerse the device, cable or plug in water or any other fluid and never touch the device with wet hands.
The air around the device must be able to circulate freely. Never install it too close to walls or large objects and never under a shelf, cupboard, curtains or similar. When locating the device, make sure you have the following minimum free space:
Front, minimum free space 100 cm
Back, the minimum free space was 100 cm
Sides, minimum free space 100 cm
Top, minimum free space 100 cm
Use this heater on a horizontal and stable surface.
The base on which the device is placed must not be made of flammable materials. It must be resistant to temperatures of at least 125°C without burning, melting, deforming or bursting into flames. Check regularly to ensure that the surface is not overheating; this could be dangerous!
Never place the device on surfaces such as beds or deep-pile carpets as openings could be blocked.
Do not place the device near an open window as rain could blow in; do not place on wet surfaces and avoid any liquids being spilled nearby. Do not place the device behind a door or along a walking route to avoid accidental trips.
The heater must not be located immediately below a socket outlet.
Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own unless constant supervision is provided.

Warnings – use

Do not use additions/accessories on the device that have not been supplied or approved by the manufacturer.
Only use the device for its intended purpose and in the manner set out in this instruction leaflet.
Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
Never cover or block the device; it will overheat and this could lead to a fire risk. Never hang or place objects such as clothing, blankets, cushions, paper, etc. on the device. The minimum distance of 1 meter between the device and flammable materials must always be applied. Ventilation openings should never be blocked as this may pose a fire risk. Never use the device to dry clothing or place anything on it. Do not let anything lean against the device!
Do not use this heater with a programmer, timer, separate remote-control system or any other device that switches the heater on automatically, since a fire rest exists if the heater is covered or positioned incorrectly.
Never use the device with an external voltage regulator such as a dimmer or similar, as this could be dangerous!
This device is exclusively intended to be used for heating workplaces such as workshops, garages, storage spaces, etc. You must only use the device for this purpose.
The connection voltage and frequency, as given on the device, must correspond to that of the socket to be used. The electrical socket to be used must be an earthed connection. The electrical installation must be protected via a 30 mA earth leakage circuit breaker. The electrical socket that you are using must be to hand at all times in order to be able to remove the plug from the socket in the event of an emergency.
To avoid overloading and/or fuses being blown, do not use any other equipment on the same socket or electrical group as the one used for the device.
Unroll the electric cable for the device fully before inserting the plug into the socket and ensure that the electrical cable does not come into contact with the fireplace or get hot. Do not run the electrical cable under the carpet, cover it with mats, runners, or similar, and do not place it in areas that are walked on frequently. Ensure that it cannot be stepped on and that no furniture is placed on top of it. Do not bend the electrical cable around sharp corners and do not roll up too tightly after use! Prevent the electrical cable from coming into contact with oil, solvents, and sharp objects. Check the cable and plug regularly for damage. Do not bend or pinch the electrical cable and do not wind it around the device; this could damage the insulation!
The use of an extension cable is not advised as this can lead to overheating and fire. If the use of an extension cable is unavoidable, make sure that it is not damaged and that it is an approved extension cable with a minimum diameter of 3×2,5 mm² and a minimum permitted capacity of 3500 Watt. Always fully extend the cable in order to prevent overheating.
Only connect the device to a fixed socket. Do not use multi-plug adapters or similar.
During use, the plug may begin to feel warm; this is normal. If it’s really warm, there may be something wrong with the socket. Please contact your electrician.
Always turn off the device and remove the plug from the power socket: Never turn the device off using the plug!
Prevent foreign objects from entering the radiation/ventilation or outlet openings on the device. This may cause electric shock, fire or damage.
Never leave a working device unattended but switch it off and then remove the plug from the socket.
Always remove the plug from the socket when the unit is not in use! Always remove the plug by pulling on the plug itself; never pull on the electrical cable!
This device gets hot during use. Never touch the device when it is on or shortly thereafter; it could burn you.
Never operate the device with wet hands.
Do not use this heater if it has been dropped.
Do not use this heater if there are visible signs of damage to the heater.

Who can use the device

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or a lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the
appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

Warnings for maintenance

Keep the device clean. Dust, dirt, and/or deposits in the device often lead to overheating. Ensure that this type of build-up is regularly removed.
Always switch the device off, remove the plug from the socket and let the device cool down before you:
clean the device
users – maintain the device.
touch or move the device.
Never switch the device on if you have noticed damage to the device itself, the cable or plug, or if it does not work properly, makes strange noises, smells odd or you can see smoke, or if it has fallen or shows any other signs of damage. Remove the plug from the socket immediately. Take the entire device back to your supplier or a recognized electrician to be checked and/or repaired. Always ask for original parts to be used.
The device may only be opened and/or repaired by a competent and qualified person. Do not carry out your own repairs as this could be dangerous! Repairs carried out by unauthorized persons or changes made to the device could damage the dust/waterproof capacity of the device and will nullify the guarantee and the manufacturer’s liability.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard

Failing to adhere to points 3, 4, 5, could lead to damage, fire, and/or personal injury. They will invalidate the guarantee and the supplier, importer, and/or manufacturer shall not be liable for the consequences.

Description

HORNBACH 10533560 2000 Watts Oil Free Radiator FIG
2

Grip
Check light
Thermostat knob
Power button I
Power button II
Wheel support (x2)
Swivel wheels (x4)

Installation, location, and connection

Remove all packaging material and keep it out of reach of children. After removing the packaging, check the appliance for damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your vendor for inspection or replacement.
Turn the radiator upside-down (make sure you don’t scratch the paint or the floor!)
Screw the two supports (each with 2 swivel castors) firmly to the radiator, see picture.
Return the heater to its upright position, wheels down.
Select a suitable location for the device taking into account all the aforementioned warnings in this manual.

Warning : only use the heater when it is in an upright position, with the wheels attached to the bottom (as pictured on the front of this booklet). Any other position is dangerous!

Set-up and operation

HORNBACH 10533560 2000 Watts Oil Free Radiator FIG
4

Make sure that both power buttons are set to off (not pressed in) and turn the thermostat knob as far as possible towards Max.
Now insert the plug into the socket.
Operate the heater by pressing one or both power buttons: 1 button pressed = 1000 W, both buttons pressed = 2000 W. The heater will start working. To heat up slowly, for a slight temperature increase or in a small space, press one button (1000 W). To heat up quickly, for a larger temperature increase or in a larger space, press both buttons (2000 W).
Once the space has reached the right temperature, turn the thermostat dial to Min until you hear a click. The light goes out and the heater shuts down. If you leave the dial in this position, the heater will maintain the current temperature by regularly switching on and off. When the heater is switched on, the light will go on. By turning the thermostat dial to the left/right, you decrease/increase the set temperature.
If so desired, you can now switch to a lower power level.
To switch off, press the depressed power button(s) again. The button(s) will come up again. The heater switches off. Unplug.
Note! It takes some time for a radiator to cool down. Give the radiator sufficient time to cool down before touching or moving (use the handle!). ‘
Attention! The lamp only burns if the thermostat has switched on the heating elements!

Safety features

Tipping safeguard

The heater is fitted with a tipping safeguard which automatically shuts off the appliance if it inadvertently falls over. When the heater is returned to its upright position, it will resume functioning as normal but, before reusing, switch off, unplug and check for damage. Do not use the heater if it is damaged or malfunctioning, but have it inspected/repaired!

Overheating safeguard

In case of internal overheating, the overheating safeguard will switch the heater off. This may occur if the heater cannot give off enough heat or if it cannot draw in enough fresh air. As mentioned above, this is generally caused by (partially) covering the heater, blocking the air inlet and outlet openings, or installing the heater too close to a wall or something similar. When the heater has cooled down sufficiently, it will in principle start again automatically, however, if you do not remove the cause of the cut-off then this will probably be repeated. Regular overheating can give rise to irreparable damage. If the overheating protection switches the heater off, you must switch off the power buttons (buttons raised), unplug, and allow the heater to cool down. Remove and/or amend the cause of overheating and reuse the heater as normal.
If you cannot find a cause and overheating recurs, stop using the heater, and take it in for inspection/repair.

Cleaning and Maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of overheating so these should be removed regularly. Switch off the heater, remove the plug from the socket and allow the heater to cool down before cleaning or carrying out maintenance work.

Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or chemical solutions!
Carefully use a vacuum cleaner to remove dust and dirt from the grills.
The heater contains no other parts which need maintenance.
At the end of the season, store the cleaned heater in the original packaging if possible. Store upright in a cool, dry and dust-free place. If necessary, remove the wheel supports.

Disposal

At its end of life, discard the device according to the local laws and regulations, or deliver the device to your supplier.

Manufactured for HORNBACH Baumarkt AG Hornbachstraße 11 76879 Bornheim- Germany