HORNBACH 10090373 Flamey Metal Black Instruction Manual

HORNBACH 10090373 Flamey Metal Black

Product Information

Specifications

• Power Supply: 220-240 V~, 50 Hz
• Light Bulb: 1x / 2x / 3x max. 40 W
• Protection Class: I
• Protection Degree: IP 20

Product Usage Instructions

Description
The product is designed for indoor use only. The light source can be replaced by the end-user.

Installation

1. Connect to Power: Ensure the power supply is off. Connect the fixture to the ceiling mount.
2. Secure Fixture: Use the provided screws to secure the fixture in place.
3. Attach Lampshade: Install and secure the lampshade onto the fixture.
4. Adjustable Light: Rotate or tilt the movable light as needed.
5. Power On: Restore power supply.

Maintenance

1. Cleaning: Wipe the fixture with a soft, dry cloth.
2. Avoid Moisture: Keep electrical components away from moisture.

FAQ

• Q: Can the light bulbs be replaced with higher wattage bulbs?
  A: No, the maximum wattage for the light bulbs should not exceed 40W as stated in the specifications for safety reasons.

• Q: Is it safe to use this product outdoors?
  A: No, this product is not suitable for outdoor or damp environments. It is intended for indoor use only.

• Q: How should I dispose of the product?
  A: Before disposal, remove any removable lamps from the fixture. Properly dispose of electronic waste following local regulations.

Ceiling Spot Luminaire – Mounting instructions

Assembly instructions
Please read these instructions carefully and keep them safe for later use!

Safety information

• Electrical work and repairs must be performed by a qualified electrician.
• During installation, always observe the national installation regulations.
• The luminaire must not be modified in any way. Risk of electric shock and accident.
• Make sure that no cables get dam-aged during the installation work.

Technical data

• Nominal voltage: 220-240 V ~, 50 Hz

• Light source: 1x / 2x / 3x max. 40 W

• Protection class: I /

• Degree of

• protection: IP 20

• Weight:
  10090373: 270 g
  10090374: 600 g
  10090391: 1000 g

• Size
  10090373: 80 x 100 x 175 mm
  10090374: 280 x 70 x 175 mm
  10090391: 460 x 70 x 175 mm35

Used symbols

• Caution: Risk to health and the product.
• Do not use outdoors or in damp environments.
• Protection class I appliance. Must be connected to a protective ground.
• Light source replaceable by end user.

Waste disposal

• The crossed-out wheeled bin symbol requires separate disposal for waste electrical and electronic equipment (WEEE). Such equipment may contain valuable, but dangerous and hazardous substances. You are required by law to return these products to a designated collection point for the re-cycling of WEEE and must not under any circumstances dispose of them as unsorted municipal waste. In this way, you can help to conserve resources and protect the environment.

• In Germany, HORNBACH is obliged:

  • to take back old appliances of
    the same type free of charge in HORNBACH stores when you purchase a new electrical or electronic appliance.

  • to take back up to 3 WEEE of the same type (up to max. 25 cm edge length) free of charge in HORNBACH stores, even if you do not purchase a new appliance.

  • when delivering a new electrical or electronic appliance to a private household, to collect an old appliance of the same type free of charge or to enable you to return it in your immediate vicinity.

• Make sure that lamps which can be removed from the appliance without destroying it have been removed from the appliance before disposing of it.

• For further details, please consult www.hornbach.com or your local authorities.

• Children must not play with plastic bags and packaging material, due to the risk of injury and suffocation. Store such material safely or dispose of it in an environmentally friendly way.

Description

1. Power supply terminal
2. Ceiling mount
3. 2 x Fastening screws
4. 2 x Screws / plugs
5. Light shade
6. Light bulb (not included)
7. Rotatable luminaire

Assembly

Caution: First disconnect the power supply for this connection.

1. Unscrew the fastening screws and remove the ceiling mount.

2. Select an installation location without pipes or cables behind it. Mark the fastening holes and drill the holes.

3. Insert plugs and fix the ceiling mount in place with screws. Attach the rotatable luminaire to the ceiling mount and fix in place with fastening screws.
   Caution: Make sure the screws and plugs are suitable for the ceiling material. Connect the luminaire to the power supply (see section III).

4. Attach the light shade to the rotatable luminaire and fix in place. Rotate or tilt the moveable luminaire according to your needs.

5. Insert the light bulb and fix in place by rotating clockwise.

6. Connect the power supply.

Connection

Connect the luminaire to the power supply (see figure). Make sure that the connections are tight and that no loose cable endings emerge from the terminal. The product needs to be earthed.

• N: Blue
• Yellow/Green
• L: Brown

Maintenance and care

Caution: Switch off the luminaire and wait for the light bulb to cool down.

Cleaning
Wipe the luminaire with a soft, dry cloth. Never use scouring powders or chemical cleaning agents. Never allow the electrical components to become damp.

Manufactured for
HORNBACH Baumarkt AG Hornbachstraße 11
76879 Bornheim / Germany
product@hornbach.com
www.hornbach.com

References

• hornbach.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>