Natures Composites Composite Rectangle Raised Garden Bed Instruction Manual

Composite Rectangle Raised Garden Bed

“`html

Specifications:

• Raised Herb Garden Bed:
  • T&G Board: Qty 2 @ 22.25″ and Qty 2 @ 44.5″
  • Garden Hinge: Qty 8
  • Garden Cap: Qty 20
  • Garden Stake: Qty 4
• Raised Shallow Garden Bed:
  • T&G Board: Qty 4 @ 22.25″ and Qty 4 @ 44.5″
  • Garden Hinge: Qty 16
  • Garden Cap: Qty 40
  • Garden Stake: Qty 8
• Raised Medium Garden Bed:
  • T&G Board: Qty 6 @ 22.25″ and Qty 6 @ 44.5″
  • Garden Hinge: Qty 24
  • Garden Cap: Qty 60
  • Garden Stake: Qty 12

Product Usage Instructions:

Assemble Panels:

1. Slide one end of the T&G Board (A) into the open end of the
   Garden Hinge (B).

2. Insert one Garden Cap (C) on both sides to lock in place.

3. Repeat on the opposite side of T&G Board (A), ensuring to
   flip over Garden Hinge (B).

4. Repeat for all T&G Boards.

Assemble Raised Herb Garden Bed:

5. Once the panels are assembled, layout the herb garden bed in
   the desired location in a straight square (2×2) or Rectangle
   (4×2).

6. Lock panels in place by sliding the Garden Stake (D) into the
   Hinge securing it into the ground.

7. For Herb Bed Only: Install the remaining Garden Caps to the top
   of the Stake aligning the cap to lock in place.

Assemble Raised Shallow Garden Bed:

12. If your Garden Stakes have a Garden Cap installed, remove
    it.

13. Stack the next level of panels, connecting the tongue and
    groove.

14. Drop the stake into the hole of the herb level stakes.

15. For Shallow Garden Beds Only: Install the remaining Garden Caps
    to the top of the Stake aligning the cap to lock in place (in your
    kit you will have 4 extra caps).

Assemble Raised Medium Garden Bed:

9. If your Garden Stakes have a Garden Cap installed, remove
   it.

10. Stack the next level of panels, connecting the tongue and
    groove.

11. Drop the stake into the hole of the shallow level stakes.

12. For Medium Garden Beds Only: Install the remaining Garden Caps
    to the top of the Stake aligning the cap to lock in place (in your
    kit you will have 8 extra caps).

FAQ:

Q: Where can I find more information about the product?

A: For more information, please visit www.naturescomposites.com.

“`

HERB

SHALLOW

MEDIUM

COMPOSITE RAISED GARDEN BED INSTALLATION GUIDELINE

ASSEMBLE PANELS
1. Slide one end of the T&G Board (A) into the open end of the Garden Hinge (B)
2. Insert one Garden Cap (C) on both side to lock in place
3. Repeat on opposite side of T&G Board (A), ensure to flip over Garden Hinge (B)
4. Repeat for all T&G Boards

COMPONENTS
RAISED HERB GARDEN BED
A. T&G Board (Qty 2 @ 22.25″ and Qty 2 @ 44.5″) B. Garden Hinge (Qty 8) C. Garden Cap (Qty 20) D. Garden Stake (Qty 4)
RAISED SHALLOW GARDEN BED
A. T&G Board (Qty 4 @ 22.25″ and Qty 4 @ 44.5″) B. Garden Hinge (Qty 16) C. Garden Cap (Qty 40) D. Garden Stake (Qty 8)
RAISED MEDIUM GARDEN BED
A. T&G Board (Qty 6 @ 22.25″ and Qty 6 @ 44.5″) B. Garden Hinge (Qty 24) C. Garden Cap (Qty 60) D. Garden Stake (Qty 12)
ASSEMBLE RAISED HERB GARDEN BED
5. Once the panels are assembled, layout the herb garden bed in the desired location in a straight square (2×2) or Rectangle (4×2)
6. Lock panels in place by sliding the Garden Stake (D) into the Hinge securing into the ground
7. For Herb Bed Only: Install the remaining Garden Caps to the top of the Stake aligning the cap to lock in place

For more information, please visit http://www.naturescomposites.com

RAISED SHALLOW GARDEN BED
If your Garden Stakes have a Garden Cap installed, remove
12. Stack the next level of panels, connecting the tongue and groove.
13. Drop the stake into the hole of the herb level stakes 14. For Shallow Garden Beds Only: Install the remaining
Garden Caps to the top of the Stake aligning the cap to lock in place (in your kit you will have 4 extra caps)

RAISED MEDIUM GARDEN BED
If your Garden Stakes have a Garden Cap installed, remove
9. Stack the next level of panels, connecting the tongue and groove.
10. Drop the stake into the hole of the shallow level stakes 11. For Medium Garden Beds Only: Install the remaining
Garden Caps to the top of the Stake aligning the cap to lock in place (in your kit you will have 8 extra caps)

To Fill Planter: Fill Planter with lightweight potting soil mix, avoiding using heavy soil mixtures that contain clay, sand and/or gravel. Drill ¼” holes in base boards for additional drainage.
For more information, please visit http://www.naturescomposites.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>