Natures Composites HERB Composite Raised Garden Bed Instruction Manual
- August 25, 2024
- Natures Composites
Table of Contents
Natures Composites HERB Composite Raised Garden Bed Instruction Manual
COMPONENTS
RAISED HERB GARDEN BED
A. T&G Board (Qty 4)
B. Garden Hinge (Qty 8)
C. Garden Cap (Qty 20)
D. Garden Stake (Qty 4)
RAISED SHALLOW GARDEN BED
A. T&G Board (Qty 8)
B. Garden Hinge (Qty 16)
C. Garden Cap (Qty 40)
D. Garden Stake (Qty 8)
RAISED MEDIUM GARDEN BED
A. T&G Board (Qty 12)
B. Garden Hinge (Qty 24)
C. Garden Cap (Qty 60)
D. Garden Stake (Qty 12)
ASSEMBLE PANELS
1. Slide one end of the T&G Board (A) into the open end of the Garden Hinge
(B)
2. Insert one Garden Cap (C) on both side to lock in place
3. Repeat on opposite side of T&G Board (A), ensure to flip over Garden Hinge
(B)
4. Repeat for all T&G Boards
ASSEMBLE RAISED HERB GARDEN BED
5. Once the panels are assembled, layout the herb garden bed in the desired
location in a straight square
(2×2) or Rectangle (4×2)
6. Lock panels in place by sliding the Garden Stake (D) into the Hinge
securing into the ground
7. For Herb Bed Only: Install the remaining Garden Caps to the top of the
Stake aligning the cap to lock in place
RAISED SHALLOW GARDEN BED
If your Garden Stakes have a Garden Cap installed, remove
12. Stack the next level of panels, connecting the tongue and groove.
13. Drop the stake into the hole of the herb level stakes
14. For Shallow Garden Beds Only: Install the remaining Garden Caps to the
top of the Stake aligning the cap to lock in place (in your kit you will have
4 extra caps)
RAISED MEDIUM GARDEN BED
If your Garden Stakes have a Garden Cap installed, remove
9. Stack the next level of panels, connecting the tongue and groove.
10. Drop the stake into the hole of the shallow level stakes
11. For Medium Garden Beds Only: Install the remaining Garden Caps to the top
of the Stake aligning the cap to lock in place (in your kit you will have 8
extra caps)
To Fill Planter: Fill Planter with lightweight potting soil mix, avoiding using heavy soil mixtures that contain clay, sand and/or gravel. Drill ¼” holes in base boards for additional drainage.
For more information, please visit http://www.naturescomposites.com