YEELIGHT YLYDD-0038 RGBIC LED Basic Strip Light User Guide
- August 23, 2024
- Yeelight
Table of Contents
YEELIGHT YLYDD-0038 RGBIC LED Basic Strip Light
Before you install
- Unpack the box and check all items that are included.
- Make sure to power on the strip light and confirm if it lights up.
Note
Illustrations of products, accessories, and user interfaces in the user
manual are for reference purposes only. Actual products and functions may vary
due to product enhancement.
Installing Your Device
- Wipe the surface to ensure it is clean and dry.
- Then adhere the Lightstrip to the mounting surface and Press it firmly.
- Peel off the protective film on the Controller box and stick it, placing the control box close to the music source for optimal sound effects.
- Turn on the power of the strip light and begin using it.
Device Resetting
Press and hold the power button for 5 seconds within one minute after powering on the device. When the device breathes in blue light, it will start to restore the factory settings. When the light changes to rainbow streamer, it means that the device has been successfully reset. When used in a new network environment, restore factory settings before reconnecting the network.
Pairing Your Device with the Yeelight App
- Download the Yeelight app from the App Store iOS devices or Google Play Android devices）.
- Ensure that the device has been powered on and reset successfully.
- Turn on Bluetooth on your smartphone.
- Open the app and follow the onscreen instructions to complete pairing.
Description of Button Functions
Specifications
- Model: YLYDD-0038
- Power Factor:
- 0.5 for US Region
- 0.7 for the Europe Region
- Power: 12W
- Rated Input: 24V 0.5A
- Rated Input (with Adapter):
- 100-240V~ 50/60Hz for US Region
- 200-240V~ 50Hz for Europe Region
- Operating Temperature: -10℃ to 25℃
- Operation Frequency: 2402‒2480 MHz
- Maximum Output Power: 10 dBm
- Size﹕6m/19.68ft
Warnings & Cautions
- L For indoor use only.
- Do not use the light strip when covered or recessed into a surface.
- Do not bend the LED inside the light strip more than 90 degrees to avoid damaging the product.
- Do not open or cut the light.
- Do not connect parts of this light strip with parts of another manufacturer’s light strip.
- The LED lightstrip should be used with the provided LED driver only.
- To prevent early product failures, the product should only be used in environments with a temperature range of 14 to 77°F (-10 to 25°C).
- The product is not water resistant, be cautious when installing and using it.
- Do not allow children to install the strip light alone.
- Unroll the strip lights before powering them on.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Operation distance is least om between the antebe and the body of the user.
- This light strip is not suitable for general indoor lighting, and can only be used for decorative purposes.
- Do not connect the light strip to the supply while it is in the packing or wound onto a reel
Customer service
warranty: 12-Month Limited warranty
Support: Lifetime Technical Support
Email: support@yeelight.com
Official website: https://en.yeelight.com
EU Declaration of Conformity
Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the
radio equipment type YLYDD-0038 complies with Directive 2014/53/EU.
E WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the environment
by handing over your waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about
the location as well as the terms and conditions of such collection points.
Replaceable control gear by an end-user.
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
Address: 10F-B4, Building B, Qingdao International Innovation Park
No.1 Keyuan Weiyi Road, Laoshan District, Qingdao City, Shandong Province,
P.R.China
Learn more at https://en.yeelight.com
2020 Yeelink Corporation, all rights reserved. Yeelight and its logo are
trademarks of Yeelink Corporation, registered in the US, EU, and other
countries. All other trademarks are the property of their respective owners.
FC FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications to this unit are not expressly approved
by the party responsible for compliance and could void the user’s authority to
operate the equipment. This device contains license-exempt
transmitters)/receiver(s) that comply with Innovation, Science, and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used by the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
To satisfy FCC&IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance are not recommended. Limited by local law regulations, the version for North America does not have a region selection option
Supplier’s Declaration of Conformity
Under FCC Part 15 SDoC procedure
Product Description: Yeelight RGBIC LED Basic Strip Light
Model Number: YLYDD-0038|
Trade Name: YEELIGHT A
Responsible Party in USA: Yeelight Technology LLC
Testing Laboratory: BUREAU VERITAS ADT (Shanghai) Corporation Addendum to the Test Report: AAOG-ESH-P24061125B-3 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For and on behalf of the Responsible Party.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>