baseus PicoGo Series Qi2 Magnetic Bracket Power Bank User Guide

baseus PicoGo Series Qi2 Magnetic Bracket Power Bank

Product Information

• Model : BS0001B-02 20W
• Color : Moon White

Warning
Please read all instructions and warnings before using this product. Improper use may result in product damage, excess heat, toxic fumes, fire, or explosion, for which damage you (purchaser) are responsible.

Warranty
Thank you for purchasing Baseus products. We provide a 12-month limited warranty for this product from the date of purchase. For more details, please visit our official website: www.baseus.com

Functions of Parts

• 1. Wireless Charging Pad
• 2. USB-C Input/Output Port
• 3. LED Indicator
• 4. Power Button

Usage Tips

1. Press the power button to turn on the wireless charging function.
2. Place your device on the wireless charging pad.
3. The LED indicator will light up to show charging status.

Magnetic Charging for iPhone
Align the magnetic charging pad with the back of your iPhone. The magnets will automatically attach and start charging.

Charging Your Devices Using Charging Cable
Connect your device to the USB-C port using a charging cable. The LED indicator will light up to show charging status.

Low Current Charging Mode
To activate low current charging mode, press the power button twice. This mode is suitable for charging low-power devices like Bluetooth earphones.

Recharging
To recharge the PicoGo Series Q12, connect it to a power source using the USB-C port. The LED indicator will show the charging status.

Important Safety Instructions

When using this product, basic precautions should always be followed:

1. Store this product in a cool and dry place.
2. Do not store this product in a hot or humid environment.
3. Using a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or personal injury.
4. Do not disassemble this product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or personal injury.
5. If the product is not used for a long time, charge and discharge it once every three months. Be aware that a depleted battery may cause fire or smoke.
6. When charging a device, this product may feel warm. This is a normal operating condition and should not be a cause for concern.
7. Under normal circumstances, battery capacity will gradually decrease with time.
8. Do not clean this product with harmful chemicals or detergents.
9. Misuse, dropping or excessive force may damage the product. Be aware that a broken or damaged battery may cause fire or smoke.
10. When disposing of secondary cells or batteries, keep those of different electrochemical systems separate.
11. CAUTION : There is a risk of explosion if the battery is replaced by an incorrect type.
12. WARNING : The batteries (battery pack or installed batteries) shall not be exposed to excessive heat, such as from the sun or fire.
13. A battery subjected to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas.

Specifications

• Model No: PG-0520S
• Capacity: 5000mAh, 3.6V/18Wh
• USB-C Input: 5V 3A; 9V 2A
• USB-C Output: 5V 2.4A; 9V 2.22A; 12V 1.5A
• Wireless Output: 5W/7.5W/15W
• Total Output: 5V-2.4A

Packaging

Content

• Product Size : 103.56713.75mm
• Product Weight : 2170g
• Operating temperature: Non-tropical area, 0°C to 30 °C (32°F to 86°F)
• Storage temperatures: 0 °C to 40 °C (32°F to 104°F)

Functions of Parts

1. Rotating Ring Stand
2. Wireless Charging Indicator
3. Battery LED Indicator
4. Magnetic Charger
5. USB-C Port
6. Power Button

Magnetic Charging for iPhone

The wireless charging indicator lights up when wireless charging starts.

Usage Tips

Charging Your Devices Using Charging Cables

• Connect it to your devices using proper charging cables. The charging begins automatically.
  • When using wired charging, the power bank turns off wireless charging by default to maximize charging speed. To use both wireless and wired charging, double press the power button to enable wireless charging.

Low Current Charging Mode

• Long press the power button to initiate low current charging mode, and the battery LED indicator will flash in a loop. Long press again to exit.
  • The power bank will automatically turn off if not in use for 2 hours.
• To power it on again, short press the button.

Recharging

Recharge the power bank via the USB-C port.

Declaration of Conformity
Shenzhen Baseus Technology Co., Ltd. declares that the product complies with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following internet address: https://eu.baseus.com/pages/eu- ro-compliance.

This product complies with the radio interference requirements This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment, Follow local rules and never dispose of the product and/or batteries with normal household waste.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received. including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment to an outlet on a circuit different from the connected receiver.
4. Consult a dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement
The product has been evaluated to meet general RF exposure requirement. Thedevice can be used in portable exposure condition without restriction. The following importer is the responsible party (for FCC matters only). Company Name: BASEUS TECHNOLOGY (US) INC

• Address : 421 S BROOKHURST ST SUITE 1312 ANAHEIM, CA 92804
• Telephone : +6-145412699
• Frequency Range : 115KHz-205kHz,360kHz
• Radiated H-Filed:
  • 115-205kHz : -13.03dBuA/m@10ml
  • 360kHz : -20.29dBuA/m@10m

Warranty

Customer Service

1. 24-Month Warranty
2. Lifetime Tech Support

Contact Us

care@baseus.com
https://www.baseus.com
+1 800 220 8056 (US)

Facebook  @Baseus.fans

Instagram @baseus_global

Twitter @Baseus_Global

YouTube @Baseusofficial

TikTok @baseusglobal

Warning Please follow the above safety instructions otherwise it will cause fire, electric shock, damage or other injuries.

Manufacturer : Shenzhen Baseus Technology Co., Ltd.
Add : 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
Hotline : +1 800 220 8056
Website : https://www.baseus.com
Official After-sales E-mail Address : care@baseus.com

Designed by Baseus Made in China PB5791Z-P0A0 11000

FAQ’s

How do I know if my device is charging?
The LED indicator will light up to show the charging status.

Can I charge multiple devices at once?
Yes, you can charge one device wirelessly and another using the USB-C port simultaneously.

What should I do if the device is not charging?
Ensure that the device is properly connected and the power button is pressed. If the problem persists, refer to the troubleshooting section in the user manual or contact customer support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>