HUMAX A21KW AT&T TV Device and Remote Control User Manual
- June 6, 2024
- HUMAX
Table of Contents
HUMAX A21KW AT &T TV Device and Remote Control User Manual
Introduction
Product manuals are intended to help customers understand the workings of the hardware devices. This product manual provides overview information of the AT&T TV device and remote control and addresses specific functions of the devices. It is posted online at att.com/userguides for customer access.
OVERVIEW
The AT&T TV device is a game-changing, proprietary ‘Over-the-Top” (OTT) device that delivers video and integrated content to your TV over the internet. It enables you to watch online videos, listen to music, use thousands of third- party apps, and play games—all on your TV. It comes preloaded with some Google apps, but thousands of others are available at the Google Play Store. The AT&T TV is used on its own as a standalone device (one per TV) so you don’t need any other AT&T TV set-top boxes or services. (It’s not compatible with any DIRECTV set-top boxes or existing Genie Servers.) It comes with a remote control offering many features, including the convenience of voice control.
Hardware Information
Specification
Size and Weight (not including feet)
-
* * Height: 32 mm- Width: 126 mm
- Depth 126 mm
- Feet:1.5 mm
- Weight TBD g
Packaging
-
* * Carton- Height: 228 mm
- Width SOS mm
- Depth: 404 mm
- Weight 282 lb
Environmental Requirements
-
* * Operating temperature: 0° C to 122° F (0° to 50° C)- Storage temperature (no damage): 0° C to 150° F (0° to 66° C)
- Relative humidity: S-8S% noncondensing
Remote Control Support (Built-In Capability)
-
* * R Remote Control Interface- RF Remote Control Interface
Ports and Interfaces
-
* * OTT Mode – 802.11ac 2A GHz or 5 GHz Wi-Fi- DC Power Input
- HDMI2.1 / HDCP23 and IA U582.0 Port (Micro-AB USB2.0 connector)
- lx USB 2.0 Port
- 10/100 Ethernet port
Power
-
* * EPS18 External PSU- AC External PSU -120v–60 HZ, 18W
- Input 12V DC 15A
- Active Power Consumption below 15W
Memory
-
* * 4GB DDR memory- 32bit LPDDR4 interface
- 16GB eMMC
Video and Audio Formats
-
* * MPEG2- Dolby Audio
- MPEG2, AVC single, dual or quad decode/ display up to 1080i60/1080p60, or UHD/4K HEVC.AV1 and VP9 decode/display
- HEVC / VP9 display
- HDRIO SMPTE ST 2084. ST 2086 Blu-ray standard and HLG support
TV Compatibility
-
* * Compatible with HD and 4K TVs with HDMI 2.1 & HDCP 23, HDCP 2.2, 60 Hz and capable of 4K 1080p and 3D
Client Hardware
Front Panel
Rear Panel
The terms HDMI, HDMI
High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator. Inc.
Other Associated Hardware
Mounting Cables
The AT&T TV (A21KW) can be set on a tabletop or mounted to a wall by attaching a cable tie to the recess in the bottom cover. If wall mounted. please note that product should be mounted less than 2 meters in height
FIGURE 3 AT &T TV-WALL MOUNTING
Power Supply
The AT&T TV (A21KW) uses the DIRECTV® EPS18 power supply.
Remote Control
The AT&T TV (A21KW) works with the RC82V Remote Control (The box and remote control are not compatible with any older DIRECTV or AT&T U-verse® equipment) Like other AT&T remote controls, the RC82V can be programmed to operate some features on TVs or audio/video equipment The key features of the RC82V Remote Control are:
CAUTION: Replace remote control batteries with same or equivalent type. There is danger of explosion if batteries are incorrectly replaced.
- The RC82V Remote Control works in IR and RF mode.
- Basic remote operations can be performed in the IR mode.
- The remote uses two-way communication to the AT&T TV.
- RF mode eliminates the need for the remote and the paired devices to be in line of sight to each other.
- The RC82V Remote Control has a directional pad. Basic operations and functions can be made by pressing the direction, then pressing ok
- Once paired, voice recognition is also available with the RC82V Remote Control so you can use voice search
Software Feature
Front Panel Network LED
Front Panel Power LED
Federal Communications Commission Interference Statement
This device complies with Pan 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
AT&T/AT&T TV 2230 E. Imperial Hwy El Segundo, CA 90245 1-800-531-5000
Trade Name AT&T/AT&T TV
Model Number. A21KW and RC82V
Federal Communications Commission (FCC):
This equipment complies with Part 15 of the FCC Rules. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- CAUTION. Changes or modifications not expressly approved by the manufacturer responsible for the compliance could void the user’s authority to operate the equipment.
The user may find the following booklet, prepared by the Federal Communications Commission. helpful: ‘How to Identify and Resolve Radio and TV Interference Problems’ This booklet is available from the U.S Government Printing Office. Washington, DC. To meet FCC requirements, only peripherals (computer input/output devices, terminals, printers, etc) certified to comply with Class B limits may be attached to this device. Operation with noncertified peripherals is likely to result in interference to radio and TV reception. To meet FCC requirements, shielded cables are required to connect the device to a personal computer, peripheral or other Class 13•certified device.
AT&T/AT&T TV
2230 E. Imperial Hwy El Segundo, CA 90245
1-800-531-5000
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this AT&T TV does not disable your alarm equipment If you have questions about what will disable alarm equipment, consult your alarm company. telephone company or a qualified installer.
DO NOT DISASSEMBLE THIS EQUIPMENT.
It does not contain any user-serviceable components. We recommend the
installation of an AC surge arrester in the AC outlet to which this equipment
is connected. Telephone companies report that electrical surges. typically
lightning transients, are very destructive to customer terminal equipment
connected to AC power sources.
FCC RF Radiation Exposure Statement
MPE/SAR/RF Exposure Information. This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled environment This equipment was
verified for RF exposure and found to comply with Council Recommendation
1999/S19/EC and FCC OET-6S RF exposure requirements.
WARNING: While this equipment is in operation, a separation distance of at least 23 centimeters (equal to 9 inches) must be maintained between the antenna inside the equipment and the bodies of all persons exposed to the antenna in order to meet the FCC RF exposure guidelines. Making changes to the antenna or the equipment is not permitted. Doing so may result in the equipment exceeding the FCC RF exposure guidelines. This equipment must not be co-located or operated in conjunction with any other antenna or radio transmitter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>