DEFVNSY BA9S 2SMD LED Light Instruction Manual
- June 1, 2024
- Defvnsy
Table of Contents
Instruction Manual
Product name:
BA9S 2835 2SMD LED Light
Product specification:
- Base type: T4W BA9S
- Voltage: 12V DC
- Power: 0.36W
- Lamp Pearls: 2835
- Number of Beads: 2SMD
- Luminous Efficiency: 100lm
- Size: 22.6mm*10mm
- Decode: No
- Non-polarised: No
Application:
This light includes T4W, BA9, BA9S, 53, 57, 1895, 64111 base, which can be
used for the following positions:
Dome light, Rear boot light, Reading light, Door light, Licence plate light
and etc..
Installation requirements and maintenance:
- Sort out all parts and accessories that will be used in lighting fixtures.
- Turn off the power before installation.
- When using this product for replacement, carefully check that the product’s interface matches the old one. Do not use it incorrectly.
- Before turning on the power, the voltage should be within the permissible value.
- Make sure that everything has been carefully checked, then turn on the power.
Safety instructions:
- Not following the instructions may cause danger.
- Make sure the device is used within the permissible voltage, which is very important.
- It can ONLY be connected to direct current, not alternating current.
- Connection to AC voltage or exceeding the maximum voltage value may cause the lamp to burn out. Please be careful about this.
After-sales service:
All products purchased from us are guaranteed to keep in good repair for one year. Any quality problem happened within this period, we will maintain for free or provide alternatives. If you ran into any problems when using our products, welcome to contact us at any time. We promise to help you solve them positively and timely.
Read User Manual Online (PDF format)
Loading......