atomi smart AT1515 Smart Wi-Fi Ceiling Light User Guide
- June 6, 2024
- Atomi Smart
Table of Contents
- Get the app
- Register
- Turn on your Atomi Smart device
- Add your Atomi Smart device
- Select the right network
- Troubleshooting
- Wiring
- Turn off the circuit breaker
- Follow the steps below:
- Turn on the circuit breaker
- Still can’t connect?
- FCC Notice:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Let’s get started!
Smart WiFi
Ceiling Light
Quick Start Guide
v3.06/21
Get the app
Download the Atomi Smart app
from the App Store or Google Play.
Register
Follow the on-screen instructions and register an account.
Make sure to allow access to Location (Android), Bluetooth, and Local Network
(iOS).
Turn on your Atomi Smart device
And confirm that the light is flashing white.
If not flashing, reset the light by following the Troubleshooting instructions.
Add your Atomi Smart device
Press “Add Device” or the “+” sign and select “Go to add” on the popup that appears.
If the popup does not appear, close the app and try again.
Still nothing? Read the “Troubleshooting” section of this user guide.
Select the right network
Enter your home WiFi name and password, then press “Continue”
Make sure you’re connected to a 2.4GHz WiFi network (Atomi Smart can’t connect to 5GHz networks).
Troubleshooting
Smart WiFi
Ceiling Light
The popup does not appear when adding a device.
Make sure that you are allowing the app to access your phone’s Location
(Android). Bluetooth and Local Network (iOS). For more details. visit our
website’s Support page.
If the popup still doesn’t appear. follow the steps below
- Press “Add Device” or the “+” sign and select your Atomi Smart device.
- Follow the on-screen instructions (Make sure you connect to a 2.4GHz WiFi Network).
I can’t find the atomic-smart-XXXX network in my WiFi list.
Make sure your Atomi Smart device is powered on and the light is flashing white. If not. reset your device.
My WiFi network doesn’t appear in the Atomi Smart app.
Use your smartphone to confirm that you have at least two WiFi bars in the vicinity of your Atomi Smart device. If not. move your Atomi Smart device closer to your router. (The list will refresh every 10 seconds).
Cannot connect to my WiFi network.
Make sure that you have entered the correct WiFi password during the WiFi setup. Check if there are problems with your internet connection. If the WiFi signal is too weak. reset your WiFi router and try again.
I’m getting “Failed to Add Device”, “Failed to find router” or “DHCP” errors.
– Confirm that your phone is connected to a 2.4GHz WiFi network.
– Check whether the router password you entered is correct.
– Confirm that the DHCP service is enabled on your router settings.
– Make sure that your WiFi signal is strong.
– Temporarily disable your 5GHz network.
– If you have a mesh network/router that does not allow you to disable 5GHz.
try to move farther away from your router until your phone moves to the 2.4GHz
band.
– For more Connection Troubleshooting tips. visit atomismort.com/connection-
troubleshooting/
My Atomi Smart device appears as “Unavailable” or “Offline” in the app.
Refresh the device list.
I just replaced my router.
If you replace your router. you will need to reset your devices and add
them again to the app.
How to reset my device?
– Turn off the light switch.
– Then. turn ON. OFF. wait 2 seconds. ON. OFF wait 2 seconds. ON.
How to control multiple lights simultaneously?
– Open the Atomi Smart app and select one of the ceiling lights that you’ve
added.
– Press the ‘Edit’ button on the top-right corner of the screen.
– Press ‘Create Group’ and select your lights.
– Press Save. You can now control your ceiling lights simultaneously.
For more information about the app and device features, tutorials, and troubleshooting tips go to: www.atomismart.com/helpCeilingLight
Wiring
Smart WiFi
Ceiling Light
Turn off the circuit breaker
Find your light’s control in your circuit breaker and turn it off.
Then make sure the power is off by flipping your switch a few times.
Follow the steps below:
- Mount screws into the junction box, leaving the screws half an inch long.
- Pass the power wire through the hole of the base, and turn it clockwise to lock the base in the junction box.
- Hang the wire rope at the hanging position of the mounting base to assist the installation.
- Screw the LN wire L-L N-N and ground wire (GND) with a screw cap
- Put the wiring cap and wires back to the junction box.
- Rotate the lamp body clockwise to fix the lamp on the base.
Turn on the circuit breaker
Turn on your switch’s power from the circuit breaker.
Still can’t connect?
Need assistance?
Our friendly customer service team will work hard to put a smile back on your
face.
Here’s how we can connect.
1-800-757-1440
Mon-Fri 9:00-5:00 EST (US)
Welcome to the Atomi Smart family!
We know you will love our products so much that we are giving you an exclusive 15% off your next purchase on atomismart.com.
Log onto https://atomismart.com/shop-now/
Add to Cart
Enter promo code ATOMI15OFF
Proceed to checkout
Free shipping on orders over $50
within the contiguous US only
Terms and concert [ors OW/.
The following terms and conditions apply to the promo code:
- The coupon is only valid on the Atomi Smart website atomismart.com.
- A valid code must be entered at the checkout page in order to redeem the
- Customers can only redeem one time at
- Customers can only use the promo code
- Atomi Smart reserves the right to cancel or modify any order, or revoke the use of the promo code for any
- Unless otherwise stated, promo codes are not valid in conjunction with other promotions or discounts.
- Additional terms and conditions may be specified in relation to specific promo codes (for example, duration, eligibility, discount amount, and products covered), and will govern the use and redemption of those
- Promo code is not exchangeable for
- Atomi Smart will not be liable and/or be required to offer replacement codes, discounts, credits, cash or otherwise compensate customers.
• discontinued or canceled promo code;
• improper use of, or inability to redeem, a promo code; or
• the inability to redeem promo codes due to technical issues.
FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to the two following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Warning
This product can expose you to chemicals including Lead, which is known to the
State of California to cause birth defects or other reproductive harm. For
more information, go to
www.P65Warnings.ca.gov.
For questions or concerns, email us at
support@atomiusa.com
Manufactured and marketed by Atomi Inc.
10 West 33rd St., New York, NY 10001
atomi™ is a trademark of Atomi Inc.
atomic smart® is a registered trademark of Atomi Inc.
Designed by Atomi in New York. Made in China.
Five-year limited warranty from the date of purchase against defects in material and workmanship.
References
- Make Your Home Smarter | Atomi Smart
- | Connection Troubleshooting - Atomi Smart
- Make Your Home Smarter | Atomi Smart
- | Smart Ceiling Light - Atomi Smart
- P65Warnings.ca.gov
- Shop Smart Products - Let Your Devices Work For You | Atomi Smart
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>