belkin WIZ023 3 in 1 Magnetic Charging Stand User Manual

: August 20, 2024
: belkin

Table of Contents

belkin WIZ023 3 in 1 Magnetic Charging Stand
Product Usage Instructions
Safety Instructions
FCC Statement
FEATURES
SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

belkin WIZ023 3 in 1 Magnetic Charging Stand

belkin-WIZ023-3-in-1-Magnetic-Charging-Stand-PRODUCT

Specifications

Manufacturer: Shenzhen Aoda Power Technology Co., Ltd.
Model Identifier: A732-150240C-EU1, A732-150240C-UK1
Input Voltage: 100-240V~
Input AC Frequency: 50/60Hz
Output Voltage: 5.0V, 9.0V, 12.0V, 15.0V
Output Current: 3.0A, 3.0A, 3.0A, 2.4A
Output Power: 15.0W, 27.0W, 36.0W, 36.0W
Average Active Efficiency: 86.58%
Efficiency at Low Load (10%): 78.62%
No-Load Power Consumption: 0.058W

Product Usage Instructions

Setting Up the Wireless Charging Stand

To set up the wireless charging stand, follow these steps:

Place the charging stand on a flat surface.
Connect the power supply to the stand and plug it into a power outlet.
Ensure the stand is powered on and ready for use.

Using the Wireless Charging Feature

To wirelessly charge your device using the stand, do thefollowing:

Ensure your device is Qi-enabled for wireless charging.
Place your device on the charging stand in the designated area for wireless charging.
Your device should start charging automatically once placed correctly on the stand.

Troubleshooting

If you encounter any issues with the wireless charger, follow these steps:

Stop using the charger immediately.
Unplug the power supply from the socket.
Contact Belkin support for assistance with troubleshooting and resolving the issue.

Frequently Asked Questions (FAQ)

Q: What should I do if my device is not charging wirelessly on the stand?
A: If your device is not charging wirelessly, ensure it is properly aligned on the stand’s charging area. You may also need to check if your device is Qi- compatible for wireless charging.
Q: Can I use the wireless charging stand with non-Qi-enabled devices?
A: No, the wireless charging feature of this stand is designed specifically for Qi-enabled devices. Using non-Qi-compatible devices may not result in successful charging.
Q: Is there a warranty for this product?
A: Please refer to the warranty information provided by Belkin0 for details on product warranty coverage and terms.

Safety Instructions

WARNING : Failure to follow these instructions could result in fire, electric shock, injury, or damage to the user, product, or other property.

Connect the power supply of the wireless charger into a power outlet that is close by and is easy to disconnect from.
Use indoors and in a dry location only; Avoid charging near sources of heat or humidity.
Keep the wireless charger and power supply away from any liquids or moisture.
Unplug the wireless charger when not in use for long periods of time.
Do not store your device in very hot or very cold locations. It is recommended to use your device at room temperature.
Do not use if visible defects are observed on the wireless charger or power supply.
Do not attempt to service, modify, or disassemble the wireless charger or power supply.
Use of a power supply not recommended or sold by Belkin may result in an increased risk of fire, electric shock, injury, or damage to the user, product, or other property.
Wireless charging power transmission rate is regulated by the wireless charging device receiving power which can be influenced by factors like, but not limited to, proprietary charging protocols, ambient temperature, current battery
percentage level and age of the device being charged.
CAUTION : If you experience problems with the wireless charger, please discontinue use, unplug the power supply from the socket, and contact Belkin for assistance.
The marking information is located on the bottom of the apparatus.
NORTH AMERICA

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA, Tel: +1(310) 751 5100, declare under our sole responsibility that this product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Innovation, Science, and Economic Development Canada Statement (ISED):
This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body

Innovation, Science and Economic Development Canada Statement:
This digital apparatus complies with CAN ICES-003(B) / NMB-003(B).

SKU/MODEL : WIZ023

FEATURES

FILE NAME INS_WIZ023bt_8850bt01838_Rev_B00_BoostCharge_Pro_3_in_1_Wireless_Charging_Stand 1
SKU# WIZ023
P# 8850bt01838
REV B00
DESIGNER HOA NGUYEN
DATE 02/2/24 3:11
PM VERSION 01

CE Declaration of Conformity
We, Belkin International, Inc., declare that the radio equipment is in compliance with the Radio Equipment Directive 2014/53/EU, Low voltage Directive 2014/35/EU, ErP Directive 2009/125/EC, RoHS Directive 2011/65/EU + 2015/863, and WEEE Directive 2012/19/EU.

Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement:
This equipment complies\ with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Frequency band in which the radio equipment operates: 127.7 kHz, 360 kHz, 111-148 kHz, 326.5kHz, 1.778MHz Maximum power transmitted: -3.57 dBµA/m @10m

UKCA Conformity:
We, Belkin International, Inc., declare that the radio equipment is in compliance with the Radio Equipment Directive 2014/53/EU, Low voltage Directive 2014/35/EU, ErP Directive 2009/125/EC, RoHS Directive 2011/65/EU + 2015/863, and WEEE Directive 2012/19/EU.
The full text of both the CE and UKCA declaration of conformity is available at the following Internet address: www.belkin.com/doc
Recycling programs for this packaging may not exist in your area Waste Electrical and Electronic Equipment Directive For information on product disposal, please refer to http://www.belkin.com/uk/weee-regulations/
Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE).
The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.
Therefore, any product that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country

SPECIFICATION

Business Unit: Core
Program Manager: Andrew Camba
Packaging Engineer: Sam Orihuela
Retail Outside Dimension (Including Hang Tab)
L x W x D (in):
Lx W x D (mm):
DIE/MATERIAL SPECS:
Material:
- Blank Size (in):
- Blank Size (mm):
  This dieline works for the following skus (if any):
Unit: IN/MM
Side Shown: PRINT SIDE
Flute/Grain: vertical
Tolerance:+/- 1/32″ – 0.8mm
Drawing Scale 1:1
RELEASE DATE:
DIELINE: Intermediate

THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST

Information for end-users as per COMMISSION REGULATION (EU) 2019/1782