SEAT CUSHION Secretlab Lumbar Pillow Pro User Guide
- June 16, 2024
- SECRETLAB
Table of Contents
SEAT CUSHION Secretlab Lumbar Pillow Pro
Cleaning
For General Cleaning
- With a clean dry cloth, dust the outer cover gently. Do not rub the outer cover harshly to avoid damaging it.
- Use a lint roller and gently roll over the outer cover to pick up any lingering debris and dust
Hand Washing Instructions
- Unzip the outer cover and remove the inner foam.
- Examine the outer cover for any stains. If there are stains, dampen a soft, clean cloth with cool water and gently dab at the stain. You should dampen both sides of the stain from both the outside and inside of the outer cover. Do not rub the fabric to avoid damaging it.
- Turn the outer cover inside out.
- Fill a container with cold water and add about 1 tablespoon of gentle-care liquid laundry detergent to the running water. Do not use hot water.
- Soak the outer cover in the water for about 5 to 10 minutes.
- Drain the water from the container and rinse the outer cover in cool water. Rinse until the water runs clear.
- Dab dry the outer cover with a dry towel. Do not wring the outer cover to dry as this will break the fibers.
- Lay the outer cover flat. Allow it to air dry completely. When completely dry, place the inner foam back into the outer cover and zip it up.
Product Using Instruction
- DO NOT BLEACH
- DO NOT IRON
- DO NOT DRY CLEAN
- DO NOT WRING
- DO NOT TUMBLE DRY
- REMOVE COVER FROM THE PILLOW
- HAND WASH COLD
- DRY FLAT
- WASH WITH LIKE COLOURS
Need any help
For additional support and full warranty terms and conditions, please scan the QR code or visit our website
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>