VIZIO XRT-270 BLE RCU Remote Control Owner’s Manual
- June 24, 2024
- Vizio
Table of Contents
VIZIO XRT-270 BLE RCU Remote Control
Specifications
- Manufacturer: Kyung In Electronics Co., Ltd
- Date: May 10, 2024
Product Information
The VIZIO BLE RCU Engineering Reference Manual provides detailed information on the key codes and pairing process for the remote control unit.
Product Usage Instructions
-
Feature:
The manual includes a list of features provided by the remote control unit. -
BLE Key Code Table:
The table lists various key names along with their corresponding IR codes and key codes. Use this table as a reference for programming the remote control. -
BLE Pairing Process:
To pair the remote control, follow these steps:- Press and hold the [MIC] key and [MUTE] key simultaneously for 5 seconds.
-
Factory Default Setting (Un-pairing):
To unpair the remote control and reset to factory default settings, follow these steps:- Press and hold the [INPUT] key and [MUTE] key simultaneously for 5 seconds.
Revision History
Version | Date | Originator | Change Description |
---|---|---|---|
0.1 | 2019.12.17 | Thomas | Initial |
Feature
- Remote control controls TV(Set-top box, Smart TV, etc).
- It use BLE [Bluetooth Low Energy] 4.2
- Using Profile : HOGP( HID Over GATT Profile )
- Device name: XRT270vXXX(The last four digits of the version.)
- Frequency range: 2.402GHz ~ 2.480GHz
- Voltage of Operating: 2.2V ~ 3.2V
- Type of modulation: GFSK( Gaussian Frequency Shift Keying )
- Channel spacing: 2MHz (40 channel)
- Duty cycle: Very low duty cycle
- Simplex/duplex: Full duplex
- Declared (RF) interface on which the apparatus is intended to operate : BLE
- ITU code
BLE Key Code Table
No | Key Name | IR code | Key Code |
---|---|---|---|
1 | INPUT | 0x2F | 0x2F (07) |
2 | POWER | 0x08 | 0x66 (07) |
3 | Sling | 0x64 | 0xC1 (07) |
4 | Netflix | 0xEB | 0xEB (07) |
5 | Prime Video | 0xEA | 0xEA (07) |
6 | Disney | 0x1F | 0x69 (07) |
7 | iHeart | 0xEE | 0x6E (07) |
8 | XumoPlay | 0x6F | 0x6F (07) |
9 | MIC | 0x40 | 0xF0 (07) |
10 | WATCH FREE | 0xF7 | 0xF7 (07) |
11 | SETUP | 0x4F | 0x41 (07) |
12 | ▲(UP) | 0x45 | 0x52 (07) |
13 | ▼ (DOWN) | 0x46 | 0x51 (07) |
14 | ◀(LEFT) | 0x47 | 0x50 (07) |
15 | ▶(RIGHT) | 0x48 | 0x4F (07) |
16 | OK | 0x44 | 0x28 (07) |
17 | BACK | 0x4A | 0x29 (07) |
18 | HOME | 0x2D | 0x4A (07) |
19 | ★ | 0x62 | 0xC0 (07) |
20 | VOL -+ | 0x03 | 0x81 (07) |
21 | VOL + | 0x02 | 0x80 (07) |
22 | MUTE | 0x09 | 0x7F (07) |
BLE Pairing Process
Remote control automatically goes into pairing mode when batteries are
inserted into a remote that is not currently paired
Press and hold [MIC] key and [MUTE] key for 5secs
Factory default setting (un-pairing)
Press and hold the [INPUT] key and [MUTE] key for 5secs
FAQ
- Q: How do I reset the remote control to factory default settings?
- A: To reset the remote control, press and hold the [INPUT] key and [MUTE] key simultaneously for 5 seconds.