Linxura SCHA-1-SP Network Thermostat Smart Controller User Guide
- September 11, 2024
- linxura
Table of Contents
Network Thermostat Setup Guide Video Link: https://youtu.be/Nqg3Q67zoko
Supported Features for the Network Thermostat
Network Thermostat button action description table
| Actions | Supported Mode | Descriptions |
|---|---|---|
| Click/Double Click | Mode: Heat, Cool, Auto, Eco | Heat: Switch to Heat mode. |
Cool: Switch to Cool mode. Auto: Switch to Auto mode. Eco: Switch to Eco mode.
Off: Turn off the thermostat.
Temperature: Heat Setpoint, Cool Setpoint| Heat Setpoint: Activate heating
when below set temperature.
Cool Setpoint: Activate cooling when above set temperature.
Rotate Clockwise/ Rotate
Counterclockwise| Temperature Up, Temperature Down| Temperature Up: Raise the
temperature by a preset percentage per rotation.
Temperature Down: Lower the temperature by a preset percentage per rotation.
How to link Linxura with Network Thermostat.
Step 1:
Make sure your Network Thermostat device is set up in the Network Thermostat
app and functioning properly. Make sure Linxura, Linxura app, Hunter Douglas
are connected to same Wi-Fi network.
Step 2:
Open your Linxura app and then select the Linxura you want to bind with
Network Thermostat.
Step 3:
Choose a button.
Step 4:
Click ‘Select platform’.
Step 5:
Select ‘Network Thermostat’ option.
Step 6:
Select Network Thermostat device.
Step 7:
Log in to your Network Thermostat account and click ‘Save.’
How to use Linxura to control the Network Thermostat device.
Step 1:
Click the ‘+’ icon to add a Click Action.
Step 2:
Click ‘Mode’ and select one of the options.
Step 3:
Select one of the Options.
Step 4:
Click ‘Temperature’.
Step 5:
Set the temperature of the NetworkThermostat.
Step 6:
Click the ‘Save’.
Step 7:
You can follow the same steps to configure Double Click, Rotate Clockwise, and
Rotate Counterclockwise.
You can now use Linxura to control your Network Thermostat!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>