clover C801 Countertop Payment Terminal User Guide
- August 18, 2024
- clover
Table of Contents
clover C801 Countertop Payment Terminal
Specifications
- Model Number: C801
- Dimensions: 40 mm (1.5 in)
- Mounting Option: Metric thread M6 x 1, Depth: 8mm (5/16 in)
Product Information
The Clover Compact printer is a compact device designed for easy installation and usage. It complies with FCC Part 15 regulations and features LTE connectivity for seamless operation.
Product Usage Instructions
Installing Printer Roll
- Open the printer compartment.
- Insert the printer roll as per the direction indicated inside the compartment.
- Close the compartment securely.
Optional: Installing PIN Shield
- Align the PIN shield with the designated slots on the device.
- Securely attach the shield in place.
Powering On
- Ensure the device is plugged into a grounded AC power outlet.
- Press the power button to turn on the device.
FCC Compliance
The device complies with FCC regulations regarding harmful interference and
exposure limits. Indoor usage is recommended for operations in the
5.15-5.25GHz band.
WEEE Directive
This product is covered under the WEEE Directive, requiring proper
collection and management for electronic waste. Please follow local guidelines
for disposal or recycling options.
FAQ
Q: What should I do if the device does not power on?
A: Check the power connection and ensure the device is plugged into a
functioning outlet. If the issue persists, contact customer support for
assistance.
Compact
Quick Start Guide
clover.com/help
Included
Install printer roll
Optional: Install PIN shield
Power on
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Part 15 Class B-specific
Note: This equipment has been tested and found to comply with the limits
for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
FCC exposure limit compliance statement
This equipment complies with radio frequency (RF) exposure limits adopted by
the Federal Communications Commission for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20 cm between
the radiator & your body.
Clover Compact
Model Number: C801
Patent
clover.com/patents
Clover Network, LLC
415 N Mathilda Ave Sunnyvale, CA 94085, USA Waste Electrical and Electronic
Equipment-WEEE
NOTE: This product is covered electronic equipment under the European Union’s
Waste from Electrical and Electronic Equipment (“WEEE”) Directive
(2012/19/EU). The WEEE Directive requires that covered equipment be collected
and managed separately from typical household waste in all EU member states.
Please follow the guidance of your local environmental authority or ask the
shop where you purchased the product for collection or recycling options.