SALTO XS4 Original plus For EURO Mortise Locks and Tubular Latches Installation Guide
- August 17, 2024
- SALTO
Table of Contents
SALTO XS4 Original plus For EURO Mortise Locks and Tubular Latches
Specifications
- Model: XS4 Original+ for EURO mortise locks & tubular latches
- IP Rating: IP54, IP44, IP56, IP44
- Door Thickness Compatibility:
- 32 – 47mm
- 45 – 60mm
- 60 – 75mm
- 75 – 90mm
- 90 – 105mm
- 105 – 120mm
- Battery Type: LR03
Product Usage Instructions
Installation
- Select the appropriate handing for the lock.
- Install the lock, ensuring it is compatible with a mortise lock or tubular latch.
- Use the provided TORX and ALLEN tools for installation based on door thickness.
- Ensure the door thickness does not exceed 60mm for proper installation.
Battery Change
- When replacing the battery, use LR03-type batteries.
- Ensure the battery compartment can hold a maximum of 40 batteries.
- Follow the provided instructions for changing the batteries.
Programming
Before closing the door, program the lock to ensure proper functionality.
FAQ
- Q: What type of batteries does the lock use?
- A: The lock uses LR03-type batteries for operation.
- Q: What is the maximum door thickness allowed for installation?
- A: The lock is designed for doors with a maximum thickness of 60mm.
Dimension
Signaling
Hardware
SALTO recommends the use of a mortise lock, with a maximum 4º pre-turn
Installation
SALTO LT2Lxx Tubular latch With Ei4xxA2.. Only!
To be used only with SALTO escutcheons
Select handing
Battery change
HOTEL GUEST ROOM LOCK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>