BLUE SEA 6011200 M-Series Dual Circuit Plus Battery Switch Instruction Manual
- October 27, 2023
- BLUE SEA
Table of Contents
Marine Electrical Products
m-Series Dual Circuit Plus™ Battery Switch
6011 / 6011200
Features
- Simultaneously switches two isolated battery banks or combines battery banks to all loads
- Tin-plated copper studs for maximum conductivity and corrosion resistance
- Studs accept 3/8″ (M10) ring terminals
- One-piece terminal stud design never loosens over time
- Isolating cover with three snap-off side pieces protects rear contacts and allows wire access in any direction
Caution
- Disconnect positive battery terminal before installing.
- Consult marine electrical professional for proper wiring application.
Installation
- Refer to the latest edition of NFPA 302 and/or ABYC E11 Standard for installation information.
- Attach one 4/0 AWG cable per terminal to meet ratings.
- Battery cable terminals must be attached under nut and lock washer. Torque 120 in-lb (13.56 N·m).
Operation
- Turn all appliances off before turning the battery switch to OFF.
- Do not switch to OFF while engine is running.
Specifications
Cranking Rating: 30 sec.
Intermittent Rating: 5 min. (UL 1107) Continuous Rating:
Terminal Stud, Tin-Plated Copper
Torque
Cable Size to Meet Ratings*
Maximum Voltage Rating
Ignition Protected
marked| 675A DC per circuit
450A DC per circuit
300A DC per circuit
3/8″-16 (M10)
120 in-lb (13.56 N·m)
4/0 AWG (120 mm²)
32 Volts DC
---|---
Agency Specifications
- Meets all American Boat and Yacht Council (ABYC) requirements for battery switches
- UL Listed – UL 1107 for electric power switches
- Meets UL 1500 and SAE J1171 external ignition protection requirements
Guarantee
Any Blue Sea Systems product with which a customer is not satisfied may be
returned for a refund or replacement at any time.
- Reducing cable sizes will reduce current ratings
Blue Sea Systems, Inc.
4600 Ryzex Way
Bellingham, WA 98226 USA
p 360.738.8230
bluesea.com
References
Read User Manual Online (PDF format)
Loading......