marta MT-FN2556A Floor Fan Instruction Manual

: August 17, 2024
: MARTA

Table of Contents

marta MT-FN2556A Floor Fan
Product Information
Product Usage Instructions
Parts list
SAFETY MEASURES
FAN ASSEMBLY
USING THE APPLIANCE
FIRST USE
USING THE DEVICE
CLEANING AND MAINTENANCE
SPECIFICATION
WARRANTY
FAQ’s
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

marta MT-FN2556A Floor Fan

Product Information

Model: MT-FN2556A
Producer: COSMOS FAR VIEW INTERNATIONAL LIMITED
Power Supply: 230V ~ 50Hz
Address: Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China

Specifications

Switch knob
Housing
Screws
Back Base
Front base
Power cord

Product Usage Instructions

Before the First Use
For packaging reasons, the fan was delivered unassembled. Do not connect the fan to the mains supply before you have completely finished the assembly. Please assemble the fan.

Using the Device
CAUTION: Do not use the fan in wet conditions (for example rain) to avoid electrical shocks. Always place the fan on a dry and even surface. To make the fan oscillate, push the oscillation button down; pull the button up to stop the oscillation.

Cleaning and Maintenance
Before cleaning, always unplug the appliance. Do not use chemical and abrasive cleaners for cleaning. For seasonal storage, use a carton to cover the fan. Loosen fittings and remove the front grille. Use a cloth soaked in soapy water to clean the fan blades. Do not immerse the appliance in water.

Parts list

Switch knob
Housing
Screws
Back Base
Front base
Power cord

Actual complexity may differ from that stated in this manual. Please ensure completeness before producing the product.
Real set of the appliance could be different from listed in the User manual.
Check Once Buy. What do you think of the tower?

SAFETY MEASURES

Please read these instructions carefully before operating the device and retain them for future reference.

Before turning on for the first time, check that the technical characteristics of the product specified in the labeling comply with the power supply in your local network.
Purpose: The device is intended for domestic use in accordance with this instruction manual. The device is not intended for industrial use.
The device is used for additional air circulation in the room. Use outdoors, near flammable objects and substances is prohibited.
Keep the power cord away from sharp edges and hot surfaces. Do not pull, twist or wrap the power cord around the body of the device. When disconnected
When connecting the device from the mains, do not pull the power cord, only grasp the plug.
Use the device only when fully assembled on the intended basis. Always place the device on a level, stable surface.
Do not repair the device yourself. Do not disassemble the device yourself; if any malfunctions occur, or if the device falls, turn off the appliance from the electrical outlet and contact your nearest service center
Do not use the appliance if the power cord is damaged or otherwise damaged.
If the power cord is damaged, its replacement, in order to avoid danger, can only be carried out by qualified specialists – service center employees. Unqualified repairs pose a direct danger to the user.
Using non-recommended accessories may be dangerous or cause damage to the product.
Always unplug the appliance from the electrical outlet before cleaning or when not in use.
To reduce the risk of electric shock and fire, do not immerse the device in water or other liquids. If this happens, immediately unplug it from the power supply and contact to the service center for inspection.
The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children must be supervised for preventing play with the device
Do not touch rotating parts while the fan is running. Make sure that foreign objects do not fall into the openings of the appliance or into its grilles. Don’t block ventilation holes on the motor housing. Keep hair away. Do not use a fan without grilles.

FAN ASSEMBLY

The device is supplied unassembled. Before assembly, make sure that the delivery set is complete and that the device has not been damaged during transportation.

Do not connect the device to the network without first assembling it completely.
Remove the device from the packaging, remove any stickers that may interfere with the normal operation of the device.
Place the power cord between the halves of the support. Align the guides on one half of the support with the holes on the other half and secure both parts of the support with latches.
Securely attach the assembled support to the bottom of the case with 3 screws. Secure the power cord in the support channel using a plastic clamp and 2 screws.

USING THE APPLIANCE

To turn on the fan, turn the air flow selector knob to one of the following positions:

On the right side:

1. minimum fan speed;
2. average fan speed;
3. maximum fan speed.

If you want the fan to rotate, turn the air flow selector knob to the left half, which shows the numbers with arrows.

CAUTION

Read this manual carefully before using the appliance and save it for future reference.

Before the first use, check the device specifications and the power supply in your network. It is not intended for industrial use. For indoor use only. Use only for domestic purposes according to the instruction manual. Do not use with damaged cord, plug or other injuries. Keep the power cord away from sharp edges and hot surfaces.
Do not pull the cord. Always take the socket. Do not reel the cord around the device housing. Never attempt to frame and repair the appliance by yourself. If you meet problems, please contact the nearest customer service center. Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use. To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Do not touch running parts of the fan. Keep foreign objects away from running parts and grille. Do not block air inlets on the motor block. Do not use the fan without protective grilles.

FIRST USE

For packaging reasons the fan was delivered unassembled. Do not connect the fan to the mains supply before you have completely finished the assembly. Please assemble the fan

USING THE DEVICE

NOTE : Do not use the fan in wet conditions (for example rain) in order to avoid electrical shocks.

Always place the fan on a dry and even surface.
To make the fan oscillate, push the oscillation button down; pull the button up to stop the oscillation.

CLEANING AND MAINTENANCE

Before cleaning, always unplug the appliance.
Do not use chemical and abrasive cleaners for cleaning.
For seasonal storage use carton to cover the fan.
Loosen fittings and remove the front grille.
Use a cloth soaked in soapy water to the fan fans.
Do not immerse the appliance in water.

SPECIFICATION

Power supply: 230 V ~ 50 Hz

Producer
COSMOS FAR VIEW INTERNATIONAL LIMITED Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China Made in China

WARRANTY

DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production. Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device. Current information about service centers is available on the website https://multimarta.com/

FAQ’s

Q: Where can I find the production date of the device?
A: The production date is available in the serial number located on the identification sticker on the gift box and/or on a sticker on the device. The serial number consists of 13 characters, where the 4th and 5th characters indicate the month, and the 6th and 7th characters indicate the year of device production.

Q: Can the complete set or appearance of the appliance change without notice?
A: Yes, the producer may change the complete set, appearance, country of manufacture, warranty, and technical characteristics of the model without notice. It is advisable to check when purchasing the device for any changes.