nedis WLTK1050BK Radio Telephone Set User Guide
- August 16, 2024
- nedis
Table of Contents
nedis WLTK1050BK Radio Telephone Set
Quick Start Guide
Walkie Talkie
For more information see the extended manual online: ned.is/wltk1050bk
Intended Use
This product is exclusively intended as a two-way communication system over
large distances of up to 10 km.
The product can be charged via the USB-C port on the side of the product.
This product is intended for indoor and outdoor use.
Any modification of the product may have consequences for safety, warranty,
and proper functioning.
The product is not intended for professional use.
Main Parts (image A)
- Display
- Push-to-talk (PTT) button
- Microphone
- Lamp button
- Up button
- Power button
- Menu / lock button
- Down button
- Call button
- Speaker
- Battery cover (2×)
- Belt clip (2×)
- Antenna
- 2.5 mm audio port
- Lamp
- Battery compartment
- USB-C input
- Type AAA batteries (2× 3)
- USB – USB-C cable
Safety Instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Retain the original product literature for future reference.
- Do not let children play with the packaging material. Always keep the packaging material out of the reach of children.
- The product cannot be used to contact the emergency services.
- Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
- Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
- Do not drop the product and avoid bumping.
- Do not immerse the product in water or other liquids.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not open the product, there are no user serviceable parts inside.
- Do not use any cell or battery that is not designed for use with the product.
- Do not mix cells or batteries of different manufacture, capacity, size or type within the product.
- Only use the cell or battery in the application for which it was intended.
- Only use the battery type(s) recommended in this document.
- Observe the plus (+) and minus (–) marks on the cell or battery and product and ensure correct use.
- Only use the provided USB cable.
- Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
- Battery usage by children should be supervised.
- Do not dismantle, open or shred batteries.
- Do not subject cells or batteries to mechanical shock.
- Do not short-circuit a cell or battery.
- In the event of a battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
- Keep cells and batteries clean and dry.
- When possible, remove the batteries from the product when not in use.
- Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
- Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials.
- Seek medical advice immediately if a cell or battery has been swallowed.
- Do not use aggressive chemical cleaning agents when cleaning the product.
Inserting the batteries (image B)
**** Observe the plus (+) and minus (–) marks on the cell or battery and
product and ensure correct use.
Charging The Product
**** Only use the provided USB charging cable.
- Insert the USB-C – USB cable Ap into the USB-C input Ai.
- Insert the other end of the cable into a USB adapter (not included).
- Connect the USB adapter to a power outlet.
Using the product
Power button A 6| Press and hold the power button A6 for 2 seconds to switch
on the product. The product beeps once. Press and hold the power button A6 for
3 seconds to switch off the product. The product beeps once.
---|---
Menu / lock button A7| Press the menu / lock button A7 to cycle through the
menu items:
-
Select a channel.
-
Select the CTCSS/DCS code.
- CTCSS sub-codes: 1-38.
- DCS sub-codes: 39-99 .
-
Select the VOX settings.
-
Select the call tone. (CA)
Switch the key tone on or off. (TO) -
Switch the roger beep on or off. (RO) Press and hold the menu / lock button A7 for 3 seconds to lock or unlock the product.
Call button A9| Press the call button A9 to send a call tone over the selected
channel.
PTT button A2| Press and hold the PTT button A2 to send a voice message over
the selected channel.
Up button A5| Press the up button A5 to increase the volume. Press and hold
the up button A5 for 2 seconds to scan for radio channels.
Down button A8| Press the down button A8 to decrease the volume. Press and
hold the down button A8 for 3 seconds to activate the monitor mode. Keep
holding the button to stay in the monitor mode.
Display A1| The display A1 automatically lights up when a button is pressed.
The display A1 automatically switches off after 6 seconds of inactivity.
Lamp button A4| Press and hold the lamp button A4 to switch on the lamp.
Belt clip Ae| Press the latch and slide the belt clip Ae upwards to remove the
belt clip. Slide the belt clip Ae into the slot on the back of the product
until it snaps into place.
Battery Compartment Au| If the battery is low, the battery icon flashes on the
display A1 and the product beeps to indicate that the batteries must be
recharged.
Frequency Channel
The product meets all required standards for radio equipment using PMR 446 frequencies as authorized. The use of this two-way radio product involves the public airways and the use of the public airways may be subject to local laws or regulations. Contact your radio licensing authority for more information.
Europe (8CHS)
Frequency channels
- 446.00625
- 446.01875
- 446.03125
- 446.04375
- 446.05625
- 446.06875
- 446.08125
- 446.09375
Disposal
The product is designated for separate collection at an appropriate collection
point. Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority responsible
for the waste management.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product WLTK1050BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety data sheet if applicable) can be found and downloaded via: nedis.com/WLTK1050BK#support
CUSTOMER SUPPORT
ned.is/wltk1050bk
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch – The Netherlands
service@nedis.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>