iZEEKER iD200 Dash Cam Telecamera Per Auto 1080P Full HD User Manual
- August 17, 2024
- iZEEKER
Table of Contents
iZEEKER iD200 Dash Cam Telecamera Per Auto 1080P Full HD
Warranty
Thank you for purchasing the iD220 Dual Dash Cam. This product carries a one-
year warranty from the purchase date.
If you have any issues, questions, or concerns about the product, please do
not hesitate to contact us. Please see the quick guide and box for our contact
details.
( support@izeeker.co )
Product Description
Package contents
- Dash Cam
- Suction Mount
- Adhesive Mount (for rear camera)
- 2 Screws
- Micro USB Cable
- car Charger
- Rear Camera with Cable Kit
Camera Overview
- Power Port
- Mounting Groove
- Microphone
- Rear Camera Interface
- MicroSD Card Slot
- Reset
- Up
- Menu/Mode
- Down
- OK/Power
- LED Indicator
- Display Screen
- Camera Lens
- Speaker
- Rear Camera Lens
- Tapped Hole
- 3M Mount
Button & Interface Description
Insert Memory Card
For reliable operation, please use a Class 1 O Micro 5D/TF card with a
capacity of 32-l 28GB.
- Insert a micro5D card into the memory card slot located at the left side of the LCD screen. Align the MicroSD card as shown in the picture below. (Electrical contacts of the microSD card should be facing the LCD display side of the camera, with the notches of microSD card facing up.) When the memory card is successfully inserted, you will hear a ‘clicking’ sound.
- To remove the Micro5D card, gently push its top edge inward until it clicks. It will pop up and can be removed.
Tips
- The micro5D card must be formatted when first used.
- For a 64GB/128GB card, please use a computer to format it with FAT32 file system before using.
- It’s recommended to format the card regularly.
Attach Mount to Camera
Align the mount with the mounting groove located at the top of the camera, slot into the groove, and slide it to the left.
Remove Lens Protection Film
Before installing the camera onto the windshield, remove the protection film from the camera lens.
Product Installation
-
Clean the windshield using water or alcohol, and wipe clean with a lint-free cloth. Install the suction mount to the windshield, and rotate the locking bar on the mount upward 90 degrees till it clicks, then mount the camera on the windshield securely.
-
Connect the Micro USB cable end of the charging cable to the camera.
-
Carefully route the power cable around the windshield and tuck the wire under the trim. When complete, insert the Car Charger into your vehicle’s cigarette lighter port.
-
Please follow the instructions below Install the rear camera in the correct direction.
-
In order to avoid damage to the dash cam, we suggest that you ask a professional to install it for you.
Operation Instructions
Powering On / Off
Automatic:
The camera is designed to automatically power on when it receives power. A
start-up sound will be played when the camera has started successfully.
When the camera is ON, simply turn OFF the engine or unplug the power cable
and the camera will switch OFF automatically.
Manual:
Switching the camera OFF manually is required for vehicles where the vehicle’s
power socket provides continuous power after the engine is turned OFF. To turn
the power off manually, press and hold the power button for at least 3
seconds. A countdown will display on the screen. Press and hold the power
button until the camera is powered off.
To turn the camera on manually, press and hold the power button for at least 3
seconds.
Mode Switches
Long press the rnode (rnenu) button to toggle video recording rnode, photo
mode, video playback mode.
Video Feature Menu
Press the rnenu button once on video recording rnode
System Menu
Press the button twice
Product Specifications
FAQ
-
Q: The screen asks ‘Please insert SD card’, but I have inserted the microSD card, what should I do?
A: The dash cam iD220 supports a 32-7 2BGB Micro SD card, Class 7 O or above. To let your dashcam work smoothly, for 64-7 2BGB SD card, the new SD card better to be formatted to FAT32 on the computer and on the dashcam before first use. -
Q: The camera automatically shuts down after one-minute-recording. What should I do?
A: The screensaver’s def alt setting is to turn the screen off after one minute. As long as the red light flashing, the recording is still continuing. You can turn off the screensaver. -
Q: How can I make it record when I park my car?
A: Please prepare a Micro-port hardwire kit to keep a continuous power apply, then it will work while the car is off and parked. -
Q: When driving, the camera will beep and show a headlight symbol on the screen. What does it mean and how to do?
A: It’s the “Headlight Warning” function means the camera is detecting your headlight is too dim. Therefore, it will make a noise and show a flashing icon. Please turn off it in the menu of ‘Headlight Warning” if you don’t wish to change your headlight lightness. -
Q: Can I playback the video on the dash cam7
A: You can view the recording in playback mode. If it is a locked video, there will be a “lock” sign on the video.