iZEEKER GD300 Dash Camera User Manual
- June 9, 2024
- iZEEKER
Table of Contents
iZEEKER GD300 Dash Camera User Manual
Warranty
Thank you for choosing Front & Interior Dash Cam; Welcome
to the family!
If you have any questions or quality issues about the product, please contact our support team. Any questions will be answered in a timely manner.
Product Description
Package Contents
- Camera
- Suction Mount
- Car Charger
- USB Type-C Cable
- Crowbar
Camera Overview
- Speaker
- Front Camera
- Cooling Vent
- suction Mount Slot
- USB Port
- GPS Port
- Power
- Menu
- Audio
- Lock
- Interior Camera
- IPS Screen
- Reset
- Microphone
- Card Slot
- Cooling Vent
Tips :
-
Indicator Light Explanation:
Charging= The red light is solidly on;
Recording= The blue light is flashing;
The dashcam is and recording on while the blue light is on. -
To reset factory settings, use the provided pin to push the reset button.
-
The interior camera is equipped with IR lights, which can
illuminate recordings in the dark. -
The interior camera can rotate up and down by 60°. You can adjust the angle as needed. If you want to turn it off, please contact us for the firmware.
-
Recommended Settings:
<1 >Turnoff parking monitoring and motion detection while driving. <2> Set the Loop Recording to “3 minutes” and the G-sensor to 11 low 11 ; -
The dashcam needs to be continuously powered with our
provided car charger while working. (A Type-c hardwire kit is needed for long- time parking monitoring)
Product Installation
Please insert the MicroSD card in the correct direction. Please note that all memory cards must be formatted on PC and on the dashcam before first use.
MicroSD card specifications: 32GB to 128GB, Class 1 O or above.
When using the MicroSD card, better format it to FAT32 on the PC. If there is no FAT32, other file format (NTFS or exFAT) is fine as well. If you are not sure how to format the card, kindly search “how to format MicroSD card on PC” on line or contact our customer support.
Connect the camera with the suction mount as shown below, then check if it’s well connected.
Remove the protective film and attach the suction mount to the front windshield behind the rear view mirror. Turn the knob in the direction shown to secure the suction mount in its firm position.
Use the car charger cable to connect the camera to the cigarette lighter socket. The wiring below is for your reference.
Product Operation
Use the options on the right side of the screen to operate dash cam functions.
Camera Start-up
A. Manual Start-up
After connecting with the USB cable or car charger, the camera can be
activated by pressing the Power button for 1 second .
B. Auto Start-up
After connecting with the car charger, the camera will turn on and start
recording automatically when the engine starts and turn itself off when the
engine shuts off.
Camera Recording
A. Start Recording
The camera will automatically record when it is turned on.
A flashing blue light means that the camera is recording.
B. Stop Recording
Press the top button to stop recording.
c. Loop Recording
Where there is insufficient space on the memory card, the “loop recording”
function automatically overwrites the oldest unlocked file on the memory card,
replacing it with a new recording.
D. Lock Recordings
When the G-sensor detects a collision, the footage currently being recorded is
automatically locked to avoid it to be overwritten by loop recording.
You can also press the orange button during recording to instantly lock the video you want to save.
Video Playback and Deletion
A. Playback on camera
Stop recording first and press the second button to enter the menu. You can
find your recordings in the Playback folder.
B. Playback on PC
You can either use the original USB cable to connect the camera to the PC or
use a card reader to read MicroSD card data on the PC.
C. Delete a video
After entering the playback screen, long press the “Enter” button on the far
right to select the delete option as shown in the picture below.
Change Settings
First, pause the video recording. Then, press the second button from the top to enter the menu. From there you can select which setting you would like to change.
Important Functions Introduction
Parking Monitoring
Please turn off this function while driving. With on, the device will automatically record whenever it detects car vibration. Using of the Parking Guard for long time periods will require a Type-C hardwired connection for the dash cam, in order to connect it to the ACC and GND of the fuse box safely and to provide the ongoing power required. Kits for this can be purchased separately.
Headlight Warning
If the headlights dim or are otherwise outside of normal parameters, the camera will show a flashing icon and deliver an audible warning to alert the driver to the anomaly.
About GPS
The GPS function is an additional function of this product. If you purchase an external GPS antenna that is compatible with this product, you can use this function. You can usually find the purchase information of the matching GPS antenna on the product page where you purchased the GD300 dash cam.
Product Specification
