iZEEKER IPL310 LED Projector User Manual

iZEEKER IPL310 LED Projector

PACKAGE LIST

INTERFACES & BUTTONS

1. Focus Wheel
2. Keystone
3. Power Button/Indicator
4. Left
5. Right
6. OK
7. UP
8. Down
9. Return

1. Lens
2. Infrared
3. Air outlet
4. Infrared Signal Receiver
5. USB1
6. USB2
7. HD
8. AV
9. Audio output
10. AC

Remote Controller

Notes

1. Do not combine new batteries with old ones in the remote.
2. When using the remote, please make sure that the signal transmitter on the remote is aimed at the infrared signal receiver on the projector.
3. If you are not using the remote for an extended period, please take out the batteries to prevent battery leakage.
4. AAA batteries are not included due to traffic safety and transportation regulations.

QUICK START

1. Plug the power cord into an outlet.
2. Take off the lens cover.
3. Connect your device to the projector correctly.
4. Press the Power Button for 3 seconds to turn on the projector.
5. Select the correct input source to project your device.
6. Adjust the kickstand accordingly.
7. Adjust the keystone to make the projection screen rectangular first, then adjust the focus wheel slowly to make the image clear. (Use in a dark environment)
8. Press the Power Button to turn off the projector.

SPECIFICATION

EG2/M PEG4
Input| USB 2.02, HDMI in2.01, AVl
Output| 3.5mm Headphone Connector
Input Voltage (V)| AC700-240V/2A 50/60Hz
Built-in Speaker| 40 SW
Power Consumption(W)| Operating 56W/Stand by SW
Projector Size| 188755*85mm
Projector Color| White
Projector Weight| 0.97 kg

WARRANTY

iZEEKER offers a 1 year warranty + 30 days return/exchange policy + lifetime support for this product.

• If you aren’t satisfied,
• If the user manual is unclear/insufficient,
• If there are missing accessories,
• If your package got damaged,
• If the product is unusable,

Please contact us at:support.dp@izeeker.co

In order to most efficiently solve the problem, please send us the following information when you contact us. Thank you.

• Amazon order number
• The photo of the serial number on the bottom of the product (e.g. B…iPL310…)
• A brief description of the problem: problem + the efforts you tried + photos/ video

ATTENTION

1. Please DO NOT look straight into the projector lens while it is operating to avoid damaging your eyes.
2. Please use the included power cord to power the projector.
3. It is normal for the machine to produce heat during use.
4. Do not place the machine in a hot or humid place to avoid damaging the internal components.
5. When cleaning the lens, please use a lens cleaner or a special lens cleaning cloth.
6. Do not disassemble this machine. If there is a persistent issue we offer professional warranty services.

CONNECTION INSTRUCTIONS

Bluetooth Connection

If you want to use Bluetooth, first connect the projector to a Bluetooth device, and then connect the projector to the other input device (such as a smart phone or computer, etc.). You can set the Bluetooth as below:

1. Click “Setting” on the menu.
2. Choose “Option” Setting and select the “Bluetooth Setting” option. Find your Bluetooth device and pair it with the projector.

Smartphone Connection

Connecting iOS and Android smartphones is as follows.

Important: Before screen mirroring, please go to the main menu to select “Screen Mirroring”. Then select the corresponding option in the menu according to your smartphone and connection method. Then you can connect to the projector according to the corresponding guide.

For Android System

• Wireless Connection for Android
  1. Please confirm your Android phone has the Screen Casting” function in Settings first.
  2. Turn on the phone’s WLAN.
  3. Turn on “Screen Casting”/”Cast” in the phone’s Settings, then select “iPL310_xxx” to connect.

Tip: You can use router Wi-Fi or the Android phone’s data to connect the projector with the above steps as needed.

For iOS System

• Cellular Connection for iPhone
  1. Turn on the WLAN of your iOS device and join the network “iPL310_xxxxxx”.
  2. Then go to the “Screen Mirroring” of the iOS device and select “iPL310_xxxxxx” to connect.
  3. The connection success.
• Wi-Fi Connection for iPhone
  1. Press “OK” on the remote or projector to connect to a wireless network.
  2. Turn on the WLAN of your iOS device and connect to the same wireless network above.
  3. Then go to the “Screen Mirroring” of the iOS device and select “iPL310_xxx” to connect.
  4. The WI-Fi connection success.
• Lightning to USB Cable for iPhone
  1. Separately prepare or purchase an official Apple Lightning to USB Cable.
  2. After plugging the cable, please click “Trust” on your phone.
  3. The wired connection success.

Notes for Connecting Smartphones to the Projector

1. The smoothness of the projector connection is affected by the strength of your Wi-Fi signal. Please make sure that the Wi-Fi signal is good enough.
2. If you connect the projector via a new Wi-Fi network for the first time, please enter the WI-Fi password in the projector.
3. If your phone cannot recognize the iPL310 projector, please reset the projector.
4. Some streaming applications (Netflix, Amazon Prime, Disney+) are copyrighted and so do not support smartphone wireless screen casting. This is a rather regular occurrence in the projector industry. It is not the projector restricting you, but the wireless screen casting restricting you. You can use a Fire TV Stick or connect with your PC via HDMI cable to watch them.
   • If you use iPhone, you can use an Apple Lightning Digital AV Adapter. The majority of streaming applications are compatible with this adapter.

HDMI Device Connection

• The projector can be connected to devices via the HDMI port. It is compatible with laptops, DVD players, Chromecast, TV Stick, etc.
  • Tips: To connect the projector to a laptop with an HDMI port through an HDMI cable is the easiest connection method. It is also a good way to check if the projector is operating normally or not.
• Before connecting, please go to the main menu and choose the HDMI input.

Connect to a Windows Laptop

• To connect to a Windows laptop, please plug the HDMI cable into your laptop and projector, then press the + [P] to connect.

Connect to MacBook

• To connect to a MacBook, a Thunderbolt/USB-C Digital AV Multiport Adapter is needed (Not included).

AV Connection

Connect DVD players to the projector using the AV input with a 3 in 1 AV cable (included), as shown in the following pictures.

support.dp@izeeker.co

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>