iZEEKER iD210 Dash Camera Front with Hidden Design User Manual

iD210 Dash Camera Front with Hidden Design User Manual

Dear Customer,

Thank you for choosing iZEEKER as your dash cam provider. We value the trust our customers place in us and will demonstrate our company’s superior product and service quality through our dash cams themselves and our high-level customer service.
Please note that items purchased from iZEEKER are covered by a one year warranty. Let us know if there is anything we can do to assist. Please kindly contact us via support@izeeker.co You can also search for “iZEEKER Dash Cam” on YouTube to know more about the dash cam operation. We look forward to serving you for many years to come. Warmest regards, iZEEKER Team

| |
---|---|---
https://www.youtube.com/channel/UCoLyq| https://www.youtube.com/channel/UCoLyqOVju| https://www.instagram.com/izeekerdashcam

Product Description

Package Contents
Before starting, check that all the following items have been included in the box. If anything is missing, please contact the seller. Memory cards are sold separately.

1. Camera x 1
2. 3M Adhesive Mount x1
3. Installation Tool x 1
4. USB Cable x 1
5. Car Charger x 1

Camera Overview

Buttob Description

| Preivew Mode| Recording Mode| Photo Mode| Playback Mode| Menu Mode
---|---|---|---|---|---
| Start Recording| Paus. Recording| Enter Menu| OK| OK
Long Press: Startup & Shutdown| Long Press: Startup & Shutdown| Long Pres Startup & Shutdown| ong Press: Startup & Shutdown| Long Press: Startup & Shutdown
| N/A| N/A.| N! ,| Up (Fast Forward)| Up
| Turn Audio on/off| Turn Audio on/off| N/A Down| (Rewind)| Down
| Enter Menu| Emergency Recording| Enter Menu| Enter Menu| Switch Mode
Long Press: Switch Mode| Long Press: Switch Mode| Long Press: Switch Mode| Long Press: Switch Mode| Long Press: Back

Preparation and Installation

Inserting and Formatting the TF Card
For reliable operation, please prepare a Class 10 microSD/ TF card with a EN capacity of 32GB.

• ‘Insert the microSD card into the memory card slot located on the left side of the LCD screen. Be aware of the orientation snown in the picture below. (Electrical contacts of the microSD card should be facing away from the LCD display side of the camera, with the notches of microSD card facing down.)

• When the memory card is successfully inserted, you will hear a ‘clicking’ sound.

• To remove the microSD card, gently push its too edge inward until it clicks. It will pop UP and can be removed.
  Tips:

• The microSD card must be formatted when first used.

• For a 64GB/128GB card, please use a computer to format it with FAT32 file system before use.

• It’s recommended to format the card regularly.

Product Installation

• Locate a suitable place on your windshield to install the camera. We recommend placing the camera behind the rear—view mirror to prevent obstructing your view while driving.
• Remove the sticker on the adhesive and attach the adhesive to the windshield. Hold the dash cam in place for a few seconds to ensure stability.
• Connect the micro USB cable end of the Charging Cable with the micro USB port of the camera. Use the crowbar in the package to tuck the cable neatly across the top of the windshield and down the side to keep the cable out of eyesight and tidy.
• ‘Insert the Car Charger into the vehicle’s cigarette lighter/charging port. The camera will automatically switch on upon receiving power.

Operation Instructions

Startup & Shutdown
Automatic:
The camera is designed to automatically power on when it receives power from the car’s power adapter. A start-up sound will be played when the camera has started successfully. When the camera is ON, simply turn OFF the engine or unplug the power cable and the camera will switch OFF automatically.
Manual:
Switching the camera OFF manually is required for vehicles where the vehicle’s power socket provides continuous power after the engine is turned OFF. To turn the power off manually, press and hold the power button for at least 3 seconds. A countdown will display on the screen. Press and hold the power button until the camera is powered off.
To turn the camera on manually, press and hold the power button for at least 3 seconds.
Switching Modes
Long press the Mode (Menu) button to toggle between the Video Recording Mode, Photo Mode, and Video Playback Mode.
Feature Guide
Press the Menu Button once to enter the Video Recording Mode.
Resolution
Default: 1080FHD
We recommend 1080P as that is the best quality, we also recommend a 32GB Class 10 TF card as that will record more video hours.
Loop Recording
Default: 3 Minutes (optimal for memory use) When there is insufficient soace on the memory card, loop recording will automatically overwrite the oldest non—-protected file on the memory card, and replace it with a new recording.
WDR
Default: On
The purpose of wide dynamic range imaging is to correctly represent the large range of brightness in the real world, from direct sunlight to the darkest shadows.
Exposure
Default: O
This setting is associated with the light conditions that you are driving in, i.e. the darker the conditions the higher the “+” setting, or if your conditions are very bright then you should be using “—“settings.
Motion Detection
Default: Off (optimal during driving)
When the camera has been turned on, the dash cam will automatically start recording when it detects a motion within 3 meters infront of the car. If the camera is turned off, it will revert to the default state.
Audio
Default: On
Timestamp
Default: On Please set the correct date and time in the “date/ time” settings before use.
Gravity Sensor
Default: Low (optimal for memory use)
When the G-sensor is activated due to a collision, the footage currently recorded will be automatically locked to avoid being overwritten by loop recording.
Parking Guard
Default: Off
Please do not turn it on while driving.
When this function is turned on, the device will automatically record when it detects car vibration when the car is parked. Activating the parking guard requires connecting to a vehicle safety fuse box to keep the camera connected to power while parked.
Headlight Warning
Default: Off
If the headlights are dim or are otherwise outside of normal parameters, the camera will show a flashing icon and deliver an audible warning to alert the driver to the anomaly.
system Settings
Press the Menu Button twice to enter the System Settings.
Date/time
Press the Up or Down button to change the date and press the OK button to confirm the settings.
Auto Power Off
Options: OFF/ 1 Minute/ 3 Minutes
When the camera is not recording, it will snut down automatically if there is no operation for a period of time.
Beep Sound
Touch—tone
Language
Options: English
Frequency
Please select the correct AC frequency according to your region. Screensaver Options: OFF/ 1 Minute/ 3 Minutes
In the recording state, the screen turns off when there is no operation after a while, but the recording continues.
License Plate
Please enter the license plate number.
Format
Please format your SD card before first use.
Please format the SD card every 15 days to prevent the card from filling up, resulting in the camera not recording properly.
Default Setting
Select OK to restore the default settings.
Version

Product Specifications

1920×1080, 1280×960, 640×480
Video Output| No
Seamless Video| Yes

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>