EUROfase LENORA 48102 Wall Mirror Instruction Manual

: August 16, 2024
: EUROfase

Table of Contents

EUROfase LENORA 48102 Wall Mirror
Product Specifications
Product Usage Instructions
FAQ
IMPORTANT SAFETY INSTRUCTIONS
HARDWARE INCLUDED
Dimension
Installation Instructions
OPERATION INSTRUCTIONS
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EUROfase LENORA 48102 Wall Mirror

Product Specifications

Model: LENORA 48102
Maximum Wattage: 42W
LED: Yes
Voltage: 120V~
Frequency: 60Hz

Product Usage Instructions

Unpacking and Inspection

When you receive the product, carefully unpack it and inspect for any damage that may have occurred during shipping.

Installation

Follow the installation instructions provided in the manual.
If you are unsure, consult a professional electrician to install the lighting product.

Power Connection

Ensure the power source matches the voltage requirements of the product (120V~).
Make sure to turn off the power before connecting the lighting fixture.

Bulb Replacement

If the LED bulb needs replacement, ensure to use a compatible bulb with a maximum wattage of 42W.
Follow the instructions on how to safely replace the bulb.

FAQ

Q: How do I contact Customer Service or Tech Support?
A: You can reach Customer Service & Tech Support at 905-695-2147 or via email at Info@eurofase.com.
Q: What should I do if the product is damaged upon arrival?
A: If you notice any damage to the product upon arrival, contact Customer Service immediately for assistance.
Q: Can I install the lighting product myself?
A: While installation instructions are provided, it is recommended to consult a professional electrician for safe and proper installation.

Thank You
You’ve just purchased a lighting product designed and built to provide you with years of enjoyment.

42W MAX,LED, 120V~,60Hz (LED driver included)

IMPORTANT SAFETY INSTRUCTIONS

Attention to installer, must test the light fixture before installation.
When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using (this furnishing).
DANGER – To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning or servicing.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
Unplug from the outlet before putting on or taking off parts.
Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
Never operate this furnishing if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water.
Return the furnishing to a service center for examination and repair.
Keep the cord away from heated surfaces.
Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
Never drop or insert any object into any opening.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
To disconnect, turn all controls to the off position, then remove the plug from the outlet.
WARNING: Risk of Injury – Keep children away from this furnishing.
WARNING: Risk of Electric Shock – Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.
GROUNDING INSTRUCTIONS:
For a permanently connected product: This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the product.
For a grounded, cord-connected product rated max 15 amperes and intended for use on a nominal 120-volt supply circuit :
This product is for use on a nominal 120-volt circuit and has a grounding plug. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
For loading always put heavier items at the bottom and not near the top to help prevent the possibility of the furnishing tipping over.
WARNING: Risk of Injury to Persons – do not use this furnishing to support video equipment such as televisions or computer monitors.
Mount furnishings at the correct height.
This unit is suitable for installation in a damp, indoor location only.
This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
Save these instructions for future reference.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder.

HARDWARE INCLUDED

Temporarily secure the paper (G) to the wall, then mark the anchor (D) locations on the wall through the holes. Remove the paper (G) and drill holes making them slightly smaller than the anchors (D) provided.

Dimension

Installation Instructions

OPERATION INSTRUCTIONS

Short touch: ON and OFF Press and hold: Dimmable
Short touch to turn ON and OFF for the defogger function. Automatic turn off after 1 hour.
Short touch to adjust the color temperature: 3000K (Warm), 4500K (Neutral), 6400K (Cool). Press and hold: Stepless CCT.

Option 1

Option 2