EUROfase 48097 CERISSA LED Mirror User Manual
- June 1, 2024
- EUROfase
Table of Contents
EUROfase 48097 CERISSA LED Mirror
Product Information
Specifications:
- Model: CERISSA 48097
- Power: 59W MAX, LED
- Voltage: 120V~, 60Hz
Product Usage Instructions
Installation:
- Ensure the power source is switched off before installing the product.
- Mount the CERISSA 48097 securely on a suitable surface using appropriate mounting hardware.
- Connect the product to the power supply following the provided guidelines.
Operation :
- To turn on the light, use the designated switch or control according to your setup.
- Adjust the brightness or settings as per your preference if the product has adjustable features.
- Ensure proper ventilation around the product for optimal performance.
Maintenance:
- Regularly clean the product with a soft, dry cloth to remove dust and dirt.
- Avoid using harsh chemicals or abrasive materials that may damage the finish.
- Inspect the product periodically for any signs of wear or damage and address them promptly.
Frequently Asked Questions (FAQ)
-
Q: How do I contact Customer Service or Tech Support?
A: You can reach Customer Service & Tech Support at 905-695-2147 or email at Info@eurofase.com -
Q: What should I do if the product malfunctions?
A: If you encounter any issues with the product, refer to the troubleshooting section in the manual. If problems persist, contact Customer Service for assistance. -
Customer Service & Tech Support: 905-695-2147
-
Email : Info@eurofase.com
-
33 West Beaver Creek Rd, Richmond Hill, Ontario Canada L4B 1L8
Thank You
You’ ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
- 59W MAX,LED,120V~,60Hz (LED driver included)
- (PILOTE DE LED COMPRIS) (INCLUYE CONTROLADOR LED
IMPORTANT SAFETY INSTRUCTIONS
- Attention to installer, must test the light fixture before installation.
- When using an electrical furnishing, basic precautions should always be followed, including the following:
- Read all instructions before using (this furnishing).
- DANGER – To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning or servicing.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
- Unplug from outlet before putting on or taking off parts.
- Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
- Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
- Never operate this fumishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and repair.
- Keep the cord away from heated surfaces.
- Never operate the fumishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
- Never drop or insert any object into any opening.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- To disconnect, turn all controls to the off position, then remove plug from outlet.
- WARNING: Risk of Injury – Keep children away from this furnishing.
- WARNING: Risk of Electric Shock – Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.
GROUNDING INSTRUCTIONS
- For a permanently connected product: This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the product.
- For a grounded, cord-connected product rated max 15 amperes and intended for use on a nominal 120-volt supply circuit :
- This product is for use on a nominal 120-volt circuit and has a grounding plug. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
- For loading always put heavier items at the bottom and not near the top in order to help prevent the possibility of the furnishing tipping over.
- WARNING: Risk of Injury to Persons – do not use this furnishing to support video equipment such as televisions or computer monitors.
- Mount furnishings at the correct height.
- This unit is suitable for installation in a damp, indoor location only.
- This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
- Save this instructions for future reference.
- Estimated Assembly Time : 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder.
HARDWARE INCLUDED
Temporarily secure the paper (G) to the wall, then mark the anchor (D)
locations on the wall through the holes. Remove the paper (G) and drill holes
making them slightly smaller than the anchors (D) provided.
Option 1:
OPERATION INSTRUCTIONS
- Short touch: ON and OFF
- Press and hold: Dimmable
Short touch to turn ON and OFF for the defogger function.- Automatic turn off after 1 hour.
- Short touch to adjust the colour temperature: 3000K (Warm), 4500K (Neutral), 6400K (Cool). Press and hold: Stepless CCT.
Option 2
Documents / Resources
|
EUROfase 48097 CERISSA LED
Mirror
[pdf] User Manual
48097 CERISSA LED Mirror, 48097, CERISSA LED Mirror, LED Mirror, Mirror
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>