Eurofase 47123 Wall Sconce Wall Light Instruction Manual
- June 1, 2024
- EUROfase
Table of Contents
Eurofase 47123 Wall Sconce Wall Light
IMPORTANT SAFETY INSTRUCTIONS
- Attention to installer, must test the light fixture before installation.
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture disconnect power by turning the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL certified wire connectors suitable for the gauge, type and number of conductors.
- Wrap the green (or bare copper) grounding wire from the fixture around the green screw on the mounting bracket, then connect it to the grounding conductor of the supply circuit. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the mounting bracket.
- This unit is to be wall mounted only.
- This unit is suitable for indoor and outdoor use.
- This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
- Save this instructions for future reference.
- Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included):
- Flathead screwdriver,
- Phillips screwdriver,
- Pliers,
- Electrical tape and Wire cutters.
Helpful Tools (not included):
- Wire strippers,
- Ladder.
Customer Service & Tech Support:
905-695-2147
Email : Info@eurofase.com
33 West Beaver Creek Rd, Richmond Hill, Ontario Canada L4B 1L8.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>