EUROfase ANYA 48085 Wall Mirror Instruction Manual
- August 16, 2024
- EUROfase
Table of Contents
EUROfase ANYA 48085 Wall Mirror
Specifications
- Model: ANYA 48085
- Power: 35W MAX, LED
- Voltage: 120V~, 60Hz
Product Information
- Congratulations on your purchase of the ANYA 48085 lighting product.
- This product is designed and built to provide years of enjoyment with its energy-efficient LED technology and sleek design.
- Please read the following instructions carefully to ensure proper usage and maximum satisfaction.
Product Usage Instructions
Installation
- Ensure the power source is switched off before installation.
- Mount the lighting fixture securely following the provided guidelines.
- Connect the fixture to the power supply according to the electrical standards in your region.
Operation
- To turn the light on/off, use the designated switch or dimmer compatible with LED lights.
- Avoid using incompatible dimmers to prevent damage to the product.
Maintenance
- Regularly clean the fixture with a soft, dry cloth to remove dust and maintain its appearance.
- Do not use harsh chemicals or abrasive materials that may damage the finish.
FAQ
- Q: What should I do if the light flickers?
- A: Check the connections to ensure they are secure. If the issue persists, contact customer service for assistance.
- Q: Can I use this product outdoors?
- A: The ANYA 48085 is designed for indoor use only. Using it outdoors may expose it to conditions that could damage the product.
- Q: Is this product compatible with a dimmer switch?
- A: Yes, this product is compatible with dimmer switches designed for LED lights. Make sure to use a compatible dimmer to avoid any issues.
Thank You
You’ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
- 35W MAX,LED, 120V~,60Hz (LED driver included)
IMPORTANT SAFETY INSTRUCTIONS
- Attention to installer, must test the light fixture before installation.
- When using an electrical furnishing, basic precautions should always be followed, including the following:
- Read all instructions before using (this furnishing).
- DANGER – To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning or servicing.
- WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
- Unplug from the outlet before putting on or taking off parts.
- Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
- Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
- Never operate this furnishing if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water.
- Return the furnishing to a service center for examination and repair.
- Keep the cord away from heated surfaces.
- Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
- Never drop or insert any object into any opening.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- To disconnect, turn all controls to the off position, then remove the plug from the outlet.
- WARNING: Risk of Injury – Keep children away from this furnishing.
- WARNING: Risk of Electric Shock – Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.
- GROUNDING INSTRUCTIONS:
- For a permanently connected product: This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the product.
- For a grounded, cord-connected product rated max 15 amperes and intended for use on a nominal 120-volt supply circuit :
- This product is for use on a nominal 120-volt circuit and has a grounding plug. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
- For loading always put heavier items at the bottom and not near the top to help prevent the possibility of the furnishing tipping over.
- WARNING: Risk of Injury to Persons – do not use this furnishing to support video equipment such as televisions or computer monitors.
- Mount furnishings at the correct height.
- This unit is suitable for installation in a damp, indoor location only.
- This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
- Save these instructions for future reference.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder.
HARDWARE INCLUDED
- Temporarily secure the paper (G) to the wall, then mark the anchor (D) locations on the wall through the holes. Remove the paper (G) and drill holes making them slightly smaller than the anchors (D) provided.
Dimension
Installation Instructions
OPERATION INSTRUCTIONS
- Short touch: ON and OFF Press and hold: Dimmable
- Short touch to turn ON and OFF for the defogger function. Automatic turn off after 1 hour.
- Short touch to adjust the color temperature: 3000K (Warm), 4500K (Neutral), 6400K (Cool). Press and hold: Stepless CCT.
CONTACT
- Customer Service & Tech Support: 905-695-2147
- Email: Info@eurofase.com
- 33 West Beaver Creek Rd, Richmond Hill, Ontario Canada L4B 1L8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>