EUROfase ASPEN 48090 Wall Mirror Instruction Manual

: August 16, 2024
: EUROfase

Table of Contents

EUROfase ASPEN 48090 Wall Mirror
Specifications
Usage Instructions
FAQ
IMPORTANT SAFETY INSTRUCTIONS
HARDWARE INCLUDED
Dimension
Installation Instructions
OPERATION INSTRUCTIONS
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EUROfase ASPEN 48090 Wall Mirror

Specifications

Model: ASPEN 48090
Input: 120V~, 60Hz
Power: 57W MAX, LED

Product Information

Congratulations on your purchase of the ASPEN 48090 lighting product.
This product is designed and built to provide you with years of enjoyment.

Usage Instructions

Locate a suitable location for mounting the ASPEN 48090 light fixture.
Ensure the power source matches the input requirements of the product (120V~, 60Hz).
Install the light fixture securely following the provided installation guidelines.
Turn on the power and enjoy the illumination provided by the ASPEN 48090.
If you encounter any issues or have questions, refer to the user manual or contact Customer Service & Tech Support.

FAQ

Q: What should I do if the light does not turn on?
A: Check the power source, ensure proper installation, and contact Customer Service & Tech Support if the issue persists.
Q: Can I use a dimmer switch with the ASPEN 48090?
A: Yes, you can use a compatible dimmer switch with this product for adjustable lighting levels.
Q: Is the ASPEN 48090 suitable for outdoor use?
A: This product is intended for indoor use only. Do not expose it to outdoor elements.

Thank You
You’ve just purchased a lighting product designed and built to provide you with years of enjoyment

57W MAX,LED,120V~,60Hz (LED driver included)

IMPORTANT SAFETY INSTRUCTIONS

Attention to installer, must test the light fixture before installation.
When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using (this furnishing).
DANGER – To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning or servicing.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
Unplug from the outlet before putting on or taking off parts.
Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
Never operate this furnishing if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water.
Return the furnishing to a service center for examination and repair.
Keep the cord away from heated surfaces.
Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
Never drop or insert any object into any opening.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
To disconnect, turn all controls to the off position, then remove the plug from the outlet.
WARNING: Risk of Injury – Keep children away from this furnishing.
WARNING: Risk of Electric Shock – Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.
GROUNDING INSTRUCTIONS:
For a permanently connected product: This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding the conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the product.
For a grounded, cord-connected product rated max 15 amperes and intended for use on a nominal 120-volt supply circuit :
This product is for use on a nominal 120-volt circuit and has a grounding plug. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
For loading always put heavier items at the bottom and not near the top to help prevent the possibility of the furnishing tipping over.
WARNING: Risk of Injury to Persons – do not use this furnishing to support video equipment such as televisions or computer monitors.
Mount furnishings at the correct height.
This unit is suitable for installation in a damp, indoor location only.
This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
Save these instructions for future reference.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder.

HARDWARE INCLUDED

Temporarily secure the paper (G) to the wall, then mark the anchor (D) locations on the wall through the holes. Remove the paper (G) and drill holes making them slightly smaller than the anchors (D) provided.

Dimension

Installation Instructions

OPERATION INSTRUCTIONS

Option 1

Short touch: ON and OFF Press and hold: Dimmable
Short touch to turn ON and OFF for the defogger function. Automatic turn off after 1 hour.
Short touch to adjust the color temperature: 3000K (Warm), 4500K (Neutral), 6400K (Cool). Press and hold: Stepless CCT.

Option 2