EUROfase 47187 Vivien 32 Inch Wide LED Abstract Linear Chandelier Instruction Manual
- August 16, 2024
- EUROfase
Table of Contents
EUROfase 47187 Vivien 32 Inch Wide LED Abstract Linear Chandelier
Product Information
Specifications:
- Product Name: VIVIEN
- Model Number: 47187
- Manufacturer: Eurofase
- Address: 33 West Beaver Creek Rd, Richmond Hill, Ontario, Canada L4B 1L8
- Contact Info: 905-695-2147
- Email: Info@eurofase.com
Product Usage Instructions
Safety Instructions:
Thank you for purchasing the VIVIEN lighting product. Please read and
follow these important safety instructions:
- Ensure the product is installed by a qualified electrician.
- Avoid direct contact with the light source when in operation.
- Keep the product away from water or moisture to prevent electrical hazards.
- Do not attempt to disassemble or modify the product yourself.
FAQ (Frequently Asked Questions):
-
Q: Can this product be used outdoors?
A: No, this product is designed for indoor use only to avoid exposure to outdoor elements. -
Q: What type of light bulbs are compatible with the VIVIEN model?
A: The VIVIEN model is compatible with standard E26/E27 base light bulbs. Ensure the wattage does not exceed the recommended limit.
Thank You
You’ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
45W MAX,LED,120V~,60Hz
(Integrated LED included)
IMPORTANT SAFETY INSTRUCTIONS
- Attention to installer, must test the light fixture before installation.
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for the installation of this lighting fixture.
- Before installing fixture disconnect power by turning the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must follow local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL-certified wire connectors suitable for the gauge, type and number of conductors.
- Wrap the green (or bare copper) grounding wire from the fixture around the green screw on the mounting bracket, then connect it to the grounding conductor of the supply circuit. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the mounting bracket.
- This unit is suitable for installation in a dry, indoor location only.
- This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
- Save this instruction for future reference.
- Estimated Assembly Time: 20 minutes
HARDWARE INCLUDED
Tools Required For Assembly (not included): Flathead screwdriver,
Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder.
INSTALLATION & OPERATING
Customer Service & Tech Support:
905-695-2147
Email: Info@eurofase.com
33 West Beaver Creek Rd, Richmond Hill, Ontario Canda L4B 1L8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>