EUROfase 47188 Vivien Linear Suspension Light Instruction Manual

: August 16, 2024
: EUROfase

Table of Contents

EUROfase 47188 Vivien Linear Suspension Light
Product Information
Product Usage Instructions
IMPORTANT SAFETY INSTRUCTIONS
HARDWARE INCLUDED
INSTALLATION & OPERATING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EUROfase 47188 Vivien Linear Suspension Light

Product Information

Specifications

Product Name: VIVIEN
Model Number: 47188
Manufacturer: Eurofase
Contact Information: Customer Service & Tech Support: 905-695-2147
Email: Info@eurofase.com
Address: 33 West Beaver Creek Rd, Richmond Hill, Ontario, Canada L4B 1L8

Product Usage Instructions

Important Safety Instructions
Always follow these safety instructions when using the VIVIEN lighting product:

Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder.

Assembly Instructions

Ensure you have all the required tools for assembly.
Follow the step-by-step assembly guide provided in the manual.
If you encounter any difficulties, contact Customer Service & Tech Support for assistance.

FAQ (Frequently Asked Questions)

Q: What should I do if the product malfunctions?
A: In case of any malfunctions, first refer to the troubleshooting section in the manual. If the issue persists, contact Customer Service for further assistance.
Q: Can I use LED bulbs with this product?
A: Yes, you can use compatible LED bulbs with the VIVIEN lighting product. Refer to the specifications for details on bulb compatibility.
Q: Is professional installation required?
A: While it is recommended to follow the assembly instructions carefully, professional installation is not mandatory. However, if you are unsure or uncomfortable with installation, it is advisable to seek professional help.

Thank You
You’ve just purchased a lighting product designed and built to provide you with years of enjoyment.

76W MAX,LED,120V~,60Hz
(Integrated LED included)

IMPORTANT SAFETY INSTRUCTIONS

Attention to installer, must test the light fixture before installation.
Follow the assembly instructions by reading the numerical order.
Use a qualified electrician for the installation of this lighting fixture.
Before installing fixture disconnect power by turning the circuit breaker or by removing the fuse at the fuse box.
If fixture is equipped with Safety Aircraft cable: Run safety cable through junction box, and around structural member of building. Ensure the safety cable is secured independently from the J-box. It is strongly suggested to use a UL-certified “For Use With Ceiling Fans” J-box.
Supplied lag bolt are for fastening into structural, and/or substrate wood material. Structural, and/or substrate other than wood material will require different mounting hardware. It is the responsibility of the installer to determine and supply the appropriate hardware for the specific material (other than wood).
All electrical connections must be by local and National Electrical Code or Canadian Electrical Code standards.
Use CSA or UL-certified wire connectors suitable for the gauge, type and number of conductors.
Attach junction box grounding wire (Green or Bare Copper) and the Bare Copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
This unit is suitable for installation in a dry, indoor location only.
This luminaire must be mounted or supported independently of an outlet box.
Save this instruction for future reference.
Estimated Assembly Time: 20 minutes

HARDWARE INCLUDED

Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder.